Atlas Metal WF-2 User Manual
Project: ___________
Item No.: ___________
Quantity: ___________
DROP-IN SERVING EQUIPMENT
WF-2
FROST TOP
Refrigerated,
Self-Contained
SPECIFICATIONS
TOP: Constructed of 14 gauge, type 304 stainless steel, die
stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top.
FROST TOP: Constructed of 14 gauge, type 304 stainless
steel, one piece construction, all welded, ground and polished to a uniform finish. The top is formed to stand 1" above
the counter top and is provided with a 1/2" full perimeter gutter to collect condensation; a 1" I.P.S. drain is provided. The
frost top has copper tubing firmly soldered to the exterior
bottom.
INSULATION: The pan is fully insulated with high density
fiberglass and polystyrene, 1-1/2" thick, and enclosed with
an 18 gauge galvanized steel outer case.
REFRIGERATION SYSTEM: The compressor housing shall
be fabricated from 14 gauge galvanized steel and bolted to
the base of the unit. A fully self-contained condensing unit is
provided with a hermetically sealed compressor. The system
is fully charged with CFC free refrigerant and ready to operate.
WF-3
WF-4
WF-5
WF-6
STANDARD FEATURES
“Quick” frost top, stands 1” above counter for attractive
display - ideal for pre-plated cold food
Fully insulated for maximum efficiency and energy
savings
Factory applied gasket - makes installation a snap and
seals units to the counter top, thus eliminating
seepage
1-Year Parts & Labor Warranty
NSF Certified and UL Recognized
ACCESSORIES
5YW - 5-Year Compressor Warranty
WFFT - Flush recessed top for frost top units
RS - Remote on/off switch for counter mounting
RDVE - Rear Drain Valve Extension
* 220 Volt - 50 Cycle Compressor
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt,
single phase operation with an on/off switch and pilot light. A
6' long 3-wire cord and plug (NEMA 5-15P) will be provided.
Specifications subject to change without notice.
* Units with these accessories are not currently UL listed.
DI-37
A
24”
12”
12”
PLAN VIEW
MODEL “A” “B”
WF-2
WF-3
WF-4
WF-5
WF-6
29-3/4”
(75.5cm)6”(15.2cm)
43-1/2”
(110.4cm)7”(17.7cm)
57-1/4”
(145.4cm)7”(17.7cm)
71”
(180.3cm)7”(17.7cm)
84-3/4”
(215.2cm)7”(17.7cm)
3”
18”
3/4”
FROST TOP
SIZE
19-1/2” X 25-1/4”
(49.5 X 64.1cm)
19-1/2” X 39”
(49.5 X 99cm)
19-1/2” X 52-3/4”
(49.5 X 133.9cm)
19-1/2” X 66-1/2”
(49.5 X 168.9cm)
19-1/2” X 80-1/4”
(49.5 X 203.8cm)
B
21-1/2”
ELEVATION
ELECTRICAL
CHARACTERISTICS
3.9amps. - 120V 1/5HP
6.8amps. - 120V 1/4HP
9.8amps. - 120V 1/3HP
9.8amps. - 120V 1/3HP
10.7amps. - 120V 1/2HP
1”
CUT-OUT
REQUIRED
22-1/4” X 28”
(56.5 X 71.1cm)
22-1/4” X 41-3/4”
(56.5 X 106cm)
22-1/4” X 55-1/2”
(56.5 X 140.9cm)
22-1/4” X 69-1/4”
(56.5 X 175.8cm)
22-1/4” X 83”
(56.5 X 210.8cm)
5”
13”
21-1/2”
END VIEW
SHIP WT.
(LBS.)
171
(77.6kg)
207
(93.9kg)
236
(107kg)
263
(119.3kg)
328
(148.8kg)
REFRIGERATION CHART
MODEL HP REF. OZ.
WF-2 1/5 134A 6 8 150 505
WF-3 1/4 134A 8 8 155 1070
WF-4 1/3 134A 10 8 155 1285
WF-5 1/3 134A 12 8 155 1285
WF-6 1/2 134A 16 8 160 2140
WFX - REFRIGERATED FROST TOP WITHOUT
LOW
PSIG.
HIGH
PSIG.
MODEL
BTU
M10 90A
WFX-2
WFX-3
WFX-4
WFX-5
WFX-6
COMPRESSORS FOR REMOTE INSTALLATIONS
WT. LESS
COMP. (LBS.)
130
(59kg)
160
(72.6kg)
190
(86.2kg)
217
(98.4kg)
252
(114.3kg)
COMPRESSOR
Units include Refrigerated Frost Top,
Cap Tube & Drier (for hook up in field by others)
2029 - 1/5 HP for WFX-2
2029-1 - 1/4 HP for WFX-3
2029-2 - 1/3 HP for WFX-4 & 5
2001-4 - 1/2 HP for WFX-6
Atlas Metal Industries 1135 NW 159th Dr. Miami, Fl 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com
DI-38
8/13-sc
Loading...