Atlas Metal WCML-4 User Manual
Project: ___________
Item No.: ___________
Quantity: ___________
SLIM-LINE DROP-IN SERVING EQUIPMENT
SLIM-LINE
COLD PAN
Refrigerated
Self-Contained
WCML-2
SPECIFICATIONS
TOP: Constructed of 18 gauge, type 304 stainless steel, die
stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top. Embossed mounting lugs are provided along the
inner surface of the top to hold a full set of removable
separator channels in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless
steel, one piece construction, all welded, ground and polished
to a uniform finish. All corners are coved with a minimum 1/4"
radius. The liner has copper tubing firmly soldered to the exterior bottom. A 3/4" dia. drain with strainer, 4" PVC nipple, and
valve is provided.
4-5/8” Standard Depth
WCML-1
WCML-2
WCML-3
WCML-4
WCML-5
WCML-6
STANDARD FEATURES
g
Slim-line configuration - it can install in counters only
16” wide
g
Fully insulated for maximum efficiency and energy
savings
g
Factory applied gasket - makes installation a snap and
seals units to the counter top, thus eliminating
seepage.
g
Accommodates standard 12”x20” pans with the use of
separator channel(s), or fractional size pans with the
use of optional adapter bars
g
1-Year Parts & Labor Warranty
g
NSF Certified and UL Recognized
INSULATION: The pan is fully insulated with high density
polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom
and enclosed with a 22 gauge galvanized steel outer case.
REFRIGERATION SYSTEM: The compressor housing shall
be fabricated from 14 gauge galvanized and bolted to the
base of the unit. A fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free
refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter
ELECTRICAL: The unit will be wired for 15 amps., 120 volt,
single phase operation, with an on/off thermostat switch and
pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will
be provided.
Specifications subject to change without notice.
* Units with these accessories are not currently UL listed.
ACCESSORIES
g
5YW - 5-Year Compressor Warranty
g
WFBL - Stainless steel perforated false bottom
Stainless Steel adapter bars (pg DI-51-52)
g
Stainless Steel adapter plates (pg DI-51-52)
g
g
CPL - Cover Plate with handles, S/S
g
2060-1 - Condensate Evaporator
g
RS - Remote on/off switch for counter mounting
RDVE - Rear Drain Valve Extension
g
* 220 Volt - 50 Cycle Compressor
g
These units have not been performance
tested for use with potentially hazardous foods,
and must be used with ice.
DI-31
16”
A
8”
8”
6-5/8”
13”
2-3/4”
MODEL OPEN-
ING
WCML-2 2
WCML-3 3
WCML-4 4
PLAN VIEW
REMOVABLE SEPARATOR
CHANNELS
ELEVATION
BC
“A” “B” “C” “D” PAN SIZE
46”
(116.8cm)
67-3/4”
(172cm)
89-1/2”
(227.3cm)
6-3/8”
(16.1cm)
6-3/8”
(16.1cm)
6-3/4”
(17.1cm)
18”
(45.7cm)
18”
(45.7cm)
21-5/8”
(54.9cm)
13-3/4”
(34.9cm)
13-3/4”
(34.9cm)
14-1/8”
(35.8cm)
11-7/8” X 41-3/4” X 4-5/8”
(30.1 X 106 X 11.7cm)
11-7/8” X 63-1/2” X 4-5/8”
(30.1 X 161.2 X 11.7cm)
11-7/8” X 85-1/4” X 4-5/8”
(30.1 X 216.5 X 11.7cm)
11-7/8” ID
ELECTRICAL
CHARACTER-
ISTICS
3.9 amps. -
120V - 1/5HP
3.9 amps. -
120V - 1/5HP
6.8 amps. -
120V - 1/4HP
4-5/8”
END VIEW
D
CUT-OUT
REQUIRED
14-1/4” x 44-1/4”
(36.1 X 112.3cm)
14-1/4” X 66”
(36.1 X 167.6cm)
14-1/4” X 87-3/4”
(36.1 X 222.8cm)
SHIP WT.
(LBS.)
166
(75.3kg)
222
(100.7kg)
257
(116.5kg)
LESS COMP.
MODEL
WCMLX-2
WCMLX-3
WCMLX-4
WCMLX - REFRIGERATED COLD PAN WITHOUT
SHIP WT.
(LBS.)
106
(48kg)
167
(75.7kg)
210
(95.2kg)
COMPRESSORS FOR REMOTE INSTALLATIONS
COMPRESSOR
Units include Refrigerated Cold Pan,
Thermostat, Cap Tube & Drier (for hook up in field
2029 - 1/5 HP for WCMLX-2, & 3
2029-1 - 1/4 HP for WCMLX-4
by others)
Atlas Metal Industries 1135 NW 159th Dr. Miami, FL 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com
DI-32
05/11-sc
Loading...