Atlas Metal WCMD-C-1, WCMD-C Specifications

DROP-IN SERVING EQUIPMENT
COLD PAN
Refrigerated, with Side Coils Self-Contained or Remote
Item No.
Quantity
c
WCMD-C/WCMD-C-X-1
These units have not been performance tested for use with potentially hazardous foods, and must be used with ice.
DESCRIPTION:
The WCMD-C series refrigerated cold pan elimi­nates the mess and expense of ice in your cold food displays. In addition, this full depth cold pan, 9-3/4”, has copper tubing wrapped around its side walls as well as the bottom - to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained - just plug it in and turn it on - or remote, where there's a need to locate the compressor at a different location.
The pan is fully insulated for maximum effi­ciency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is construct­ed of stainless steel and is provided with a 3/4”
c
WCMD-C/WCMD-C-X-2
c
WCMD-C/WCMD-C-X-3
c
WCMD-C/WCMD-C-X-4
c
WCMD-C/WCMD-C-X-5
c
WCMD-C/WCMD-C-X-6
NOTE: NSF-C & UL (FOR WCMD-C ONLY)
WCMDC-3 SHOWN
stainless steel drain. The cold pan accommo­dates standard 12" x 20" pans, perfect for any cold food serving application.
FEATURES:
g
Accommodates you deepest pan or insert ­9-3/4” deep
g
Refrigerated copper tubing around all sides and base - meet your toughest health department standards
g
Fully insulated for maximum efficiency and energy savings
g
Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
g
Utilizes standard 12” x 20” pans, or fractional size pans with the use of adapter bars
g
NSF certified - WCMD-C series is UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SS-13
COLD PAN
Refrigerated, with Side Coils Self-Contained or Remote
MODEL
WCMD-C-1 1 16 19-7/8” X 11-3/4” X 9-3/4”
c
c
WCMD-C-2 2 29-3/4 19-7/8” X 25-1/2” X 9-3/4”
WCMD-C-3 3 43-1/2 19-7/8” X 39-1/4” X 9-3/4”
c
WCMD-C-4 4 57-1/4 19-7/8” X 53” X 9-3/4”
c
WCMD-C-5 5 71 19-7/8” X 66-3/4” X 9-3/4”
c
WCMD-C-6 6 84-3/4 19-7/8” X 80-1/2” X 9-3/4”
c
** Remote refrigeration does not include compressor. Thermostat control, drier, and cap. tube are included.
2”
1
24”
12”
PAN
OPENINGS
A
PLAN VIEW
“A” PAN SIZE
11-3/4”
13”
2-3/4
B
ELEVATION
ELECTRICAL
CHARACTERISTICS
2.4 amps. - 120V 1/5 HP
3.9 amps. - 120V 1/5 HP
3.9 amps. - 120V 1/5 HP
6.8 amps. - 120V 1/4 HP
9.8 amps. - 120V 1/3 HP
9.8 amps. - 120V 1/3 HP
REMOVABLE SEPARATOR
HANNEL
C
C
CUT-OUT
REQUIRED
22-1/4” X 14-1/4” 125
22-1/4” X 28” 165
22-1/4” X 41-3/4” 200
22-1/4” X 55-1/2” 240
22-1/4” X 69-1/4” 280
22-1/4” X 83” 320
19-7/8 I.D.
END VIEW
D
SHIP WT.
(lbs.)
9
REMOTE*
REFRIGERATION
MODEL
WCMD-C-X-1 90
c
WCMD-C-X-2 130
c
WCMD-C-X-3 165
c
WCMD-C-X-4 190
c
WCMD-C-X-5 230
c
WCMD-C-X-6 270
c
-3/4 I.D.
WCMD-C-1 3-7/8” 18” 13-3/4” WCMD-C-2 5-5/8” 21-1/2” 21-5/8” WCMD-C-3 7” 21-1/2” 21-5/8” WCMD-C-4 7” 21-1/2” 21-5/8” WCMD-C-5 7” 21-1/2” 21-5/8” WCMD-C-6 7” 21-1/2” 21-5/8”
B C D
LESS COMP.
RMX
SPECIFICATIONS:
TOP: Constructed of 18 gauge, type 304 stainless
steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus prevent­ing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapter bars in place. LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the exterior bottom and all sides. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided. INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galva­nized steel outer lines. The entire unit is removable without the use of tools. REFRIGERATION SYSTEM: (WCMD-C series only) The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with
a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter. ELECTRICAL: (WCMD-C series only) The unit will be
wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.
Specifications subject to change without notice.
ACCESSORIES:
c
Remote switch
c
Stainless steel adapter bars
c
5-year extended compressor warranty
c
Remote compressor (hook-up in field by others)
c
1/5 HP for WCMD-C-X-1,2,& 3
c
1/4 HP for WCMD-C-X-4
c
1/3 HP for WCMD-C-X-5 & 6
c
Condensate evaporator
SS-14
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
01/10-SC
Loading...