Atlas Metal WCMD-C-1, WCMD-C User Manual
DROP-IN SERVING EQUIPMENT
COLD PAN
Refrigerated, with Side Coils
Self-Contained or Remote
Item No.
Quantity
c
WCMD-C/WCMD-C-X-1
These units have not been
performance tested for use
with potentially hazardous
foods, and must be used with ice.
DESCRIPTION:
The WCMD-C series refrigerated cold pan eliminates the mess and expense of ice in your cold
food displays. In addition, this full depth cold
pan, 9-3/4”, has copper tubing wrapped around
its side walls as well as the bottom - to meet the
strictest health department codes. The drop-in
pan can be installed in virtually any counter and
can be provided as fully self-contained - just
plug it in and turn it on - or remote, where
there's a need to locate the compressor at a
different location.
The pan is fully insulated for maximum efficiency and energy savings, and is provided
with a factory applied gasket so that it can be
installed in the finest wood fixtures without
marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4”
c
WCMD-C/WCMD-C-X-2
c
WCMD-C/WCMD-C-X-3
c
WCMD-C/WCMD-C-X-4
c
WCMD-C/WCMD-C-X-5
c
WCMD-C/WCMD-C-X-6
NOTE: NSF-C & UL
(FOR WCMD-C ONLY)
WCMDC-3 SHOWN
stainless steel drain. The cold pan accommodates standard 12" x 20" pans, perfect for any
cold food serving application.
FEATURES:
g
Accommodates you deepest pan or insert 9-3/4” deep
g
Refrigerated copper tubing around all sides
and base - meet your toughest health
department standards
g
Fully insulated for maximum efficiency and
energy savings
g
Factory applied gasket - makes installation a
snap and seals units to the counter top, thus
eliminating seepage
g
Utilizes standard 12” x 20” pans, or fractional
size pans with the use of adapter bars
g
NSF certified - WCMD-C series is UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SS-13
COLD PAN
Refrigerated, with Side Coils Self-Contained or Remote
MODEL
WCMD-C-1 1 16 19-7/8” X 11-3/4” X 9-3/4”
c
c
WCMD-C-2 2 29-3/4 19-7/8” X 25-1/2” X 9-3/4”
WCMD-C-3 3 43-1/2 19-7/8” X 39-1/4” X 9-3/4”
c
WCMD-C-4 4 57-1/4 19-7/8” X 53” X 9-3/4”
c
WCMD-C-5 5 71 19-7/8” X 66-3/4” X 9-3/4”
c
WCMD-C-6 6 84-3/4 19-7/8” X 80-1/2” X 9-3/4”
c
** Remote refrigeration does not include compressor. Thermostat control, drier, and cap. tube are included.
2”
1
24”
12”
PAN
OPENINGS
A
PLAN VIEW
“A” PAN SIZE
11-3/4”
13”
2-3/4
B
ELEVATION
ELECTRICAL
CHARACTERISTICS
2.4 amps. - 120V
1/5 HP
3.9 amps. - 120V
1/5 HP
3.9 amps. - 120V
1/5 HP
6.8 amps. - 120V
1/4 HP
9.8 amps. - 120V
1/3 HP
9.8 amps. - 120V
1/3 HP
REMOVABLE SEPARATOR
HANNEL
C
C
CUT-OUT
REQUIRED
22-1/4” X 14-1/4” 125
22-1/4” X 28” 165
22-1/4” X 41-3/4” 200
22-1/4” X 55-1/2” 240
22-1/4” X 69-1/4” 280
22-1/4” X 83” 320
19-7/8 I.D.
END VIEW
D
SHIP WT.
(lbs.)
9
REMOTE*
REFRIGERATION
MODEL
WCMD-C-X-1 90
c
WCMD-C-X-2 130
c
WCMD-C-X-3 165
c
WCMD-C-X-4 190
c
WCMD-C-X-5 230
c
WCMD-C-X-6 270
c
-3/4 I.D.
WCMD-C-1 3-7/8” 18” 13-3/4”
WCMD-C-2 5-5/8” 21-1/2” 21-5/8”
WCMD-C-3 7” 21-1/2” 21-5/8”
WCMD-C-4 7” 21-1/2” 21-5/8”
WCMD-C-5 7” 21-1/2” 21-5/8”
WCMD-C-6 7” 21-1/2” 21-5/8”
B C D
LESS COMP.
RMX
SPECIFICATIONS:
TOP: Constructed of 18 gauge, type 304 stainless
steel, die stamped with a raised perimeter bead.
There shall be a solid vinyl gasket under the beaded
edge to form a seal to the counter top, thus preventing seepage or marring of the counter top.
Embossed mounting lugs are provided along the
inner surface of the top to hold the removable
adapter bars in place.
LINER: The inner liner shall be 18 gauge, type 304
stainless steel, one piece construction, all welded,
ground and polished to a uniform finish. All corners
are coved with a minimum 1/4" radius. The liner has
copper tubing firmly soldered to the exterior bottom
and all sides. A 3/4" dia. drain with strainer, 4" PVC
nipple, and valve is provided.
INSULATION: The pan is fully insulated with high
density polystyrene, 1" thick on all sides, 1-1/2" thick
on the bottom and enclosed with a 22 gauge galvanized steel outer lines. The entire unit is removable
without the use of tools.
REFRIGERATION SYSTEM: (WCMD-C series only)
The compressor housing shall be fabricated from
formed angles and bolted to the base of the unit. A
fully self-contained condensing unit is provided with
a hermetically sealed compressor and a thermostat
control. The system is fully charged with CFC free
refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: (WCMD-C series only) The unit will be
wired for 15 amps., 120 volt, single phase operation
with an on/off thermostat switch and pilot light. A 6'
long, 3-wire cord and plug (NEMA 5-15P) will be
provided.
Specifications subject to change without notice.
ACCESSORIES:
c
Remote switch
c
Stainless steel adapter bars
c
5-year extended compressor warranty
c
Remote compressor (hook-up in field by others)
c
1/5 HP for WCMD-C-X-1,2,& 3
c
1/4 HP for WCMD-C-X-4
c
1/3 HP for WCMD-C-X-5 & 6
c
Condensate evaporator
SS-14
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
01/10-SC
Loading...