Atlas Metal VGG6-LT-2 Specifications

VGG6

Protected by US Patent #D610,375

Single Sided Full-Service Protector

w/ Slimline T8 Fluorescent Lamp

FINISH:

Clear Anodized Aluminum

Powder Coat:

Black Silver

RAL#

GLASS (Clear Tempered):

3/8" Front - Std 1/2" Front

3/8" Top - Std

1/2" Top

Frosted

Anti - Reflective

Starfire

LENGTHS:

-2 = 35-1/4" O.A. - 1 Section

-3 = 49" O.A. - 1 Section

-4 = 62-3/4" O.A. - 1 Section**

-5 = 76-1/2" O.A. - 2 Sections

-6 = 90-1/4" O.A. - 2 Sections Custom = ___________ O.A.

NSF/ANSI2 -2010 Standards Requirements:

This language is copied with permission of NSF International

5.35.12

5.35.12.1

5.35.12.2

5.35.12.3

5.35.12.4

Food Shields for use on cafeteria counters

The sum of a shield’s protected horizontal plane (X) and its protected vertical plane (Y) shall be greater than or equal to 32 inches. W hen (X) = 0, (Y) shall be a minimum of 60 inches from finished floo Maximum distance from the bottom edge of the front vertical glass and counter top shall be 1.5 inches Maximum distance between the vertical glass and horizontal glass is 3/4 inch Minimum horizontal distance between the front inside edge of displayed food and the bottom leading edge of the shield s 1.5 inches

(*) Not all option available on all models Contact Factory for specific information

For Mounting Options see Mounting Specifications Sheet

PROTECTORS WITH LIGHTS AND/OR WARMERS REQUIRE (2) END PANELS

5.35.6

5.35.6.1

A vertical barrier (end shield) shall be provided at each end of a foodshield. The vertical barrier shall be a minimum of 18 inches deep (front to back) beginning at the bottom leading edge of the foodshield. The minimum height of the vertical barrier shall be equal to the overall height of the foodshield. The maximum distance from the bottom edge of the vertical barrier and counter top shall be 1.5 inches. A foodshield intended to be installed a maximum of 3" (76mm) from a building wall perpendicular to the foodshield is exempt from the requirem ents of 5.35.6 provided that the height of the building wall is not lower than the overall height of the foodshield.

- Centerline Dimensions L / L1 - 60" Max (3/8" Glass)

- 66" Max (1/2" Glass) T1 - 96" Max in Single Section

10/22/10

74 7/8

( * - Middle support is centered unless L1 dimension is specified )

( ** - 1/2" Clear Tempered Glass Top Panel )

(2) End Panels per unit unless otherwise specified. End panels are 1/4" clear tempered glass unless otherwise specified.

21 9/16

17 1/16

18 1/8

11 5/16

18 11/16

19 7/8

17 5/8