PEFORMANCE SPECIFICATIONS
MODEL POWER 70.7V FREQUENCY SENSITIVITY WOOFER WOOFER DIMENSIONS CUT-OUT WEIGHT
RATING T APS RESPONSE (1W/1M) MAG WT . VOLUME DIMENSIONS
FAP40T 16 Watts 1, 2, 4, 100Hz-12kHz
(±3DB)
87dB 4" Polypropylene 13 oz 73⁄8" (187mm) 65⁄16" 4 lbs.
(8 Ohm) 8, 16 Average w/SBR (369g)
Bezel Diameter,
(160mm) (1.8kg)
80Hz-15kHz
(±5DB)
Surround 71⁄8" (181mm)
OverAll Height
Specifications subject to change without notice
© 2003 Atlas Sound Printed in U.S.A. 000903 ATS001618 RevA 9/03 SL1-2028
2.33
One
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
STRATEGY SERIES®II 4" SPEAKER SYSTEM
FAP40T
FAP40T
FAP40T
Tile Bridge Mounting System
(included)
FEATURES
• Tuned & ported design for extended bass response
• 16 watt internal transformer
• 8 ohm transformer bypass setting
• Low profile plastic enclosure
• Input via 2 pole terminal strip
• Press-fit grille blends perfectly into contemporary architecture
• Lightweight construction makes use of additional support in drywall ceilings unnecessary
• Tile bridge included
• Perfect companion with the FASUB70 subwoofer system when sub bass is required
• UL 1480 Listing pending
APPLICATIONS
Designed to provide high performance in a very compact footprint, the FAP40T appeals to both
system designers and architects. FAP40T is ideal for high-intelligibility voice, music, and signal
reproduction in commercial, industrial, and institutional applications.
GENERAL DESCRIPTION
A unique (patent pending) tap selector switch design allows for easy system tuning. A full selection of taps up to 16 watts as well as an 8 ohm transformer bypass setting is included for maximum system versatility. This switch “knob” also functions as a diffuser cone, providing smooth,
even dispersion of the high frequency content from the center of the 4" polypropylene driver. In
fact, the high frequency response of the FAP40T is so natural that many would assume that the
driver in the FAP40T was a coaxial design instead of a single cone driver.
Low frequency response is enhanced by the tuned and ported enclosure design. The enclosure
(UL1480 pending) is constructed of high impact injection molded plastic and includes a press fit
grill design that blends quite well with contemporary architecture.
A two pole terminal strip housed below a metal removable cover on the back of the FAP40T
enclosure allows for easy system wiring as well as “daisy chain” wiring to other FAP40T’s or
even FASUB70 subwoofers (a great combination!).
MOUNTING ACCESSORIES
A Tile Bridge is included in the package for suspended ceiling applications. The light weight
design of the FAP40T coupled with the “dog leg” mounting system allows the FAP40T to mount
into most drywall ceilings without the need for a separate mounting ring.
For new construction drywall ceiling applications, the optional FA-TR4 trim ring is available. This
unit provides a marked location for drywall installers to cut around essentially reserving the
desired location in the ceiling until final installation of FAP40T. Mounting holes are provided to
accommodate 16" or 24" OC stud/joist mounting.
The package includes an attractive press-fit grille, which nicely matches contemporary architecture.
The FAP40T includes a secondary support point built into the termination cover. This “ring” may
be used with an auxiliary support cable in drop tile installations.
FAP40T Ceiling Installation
FA-TR4
(optional)
Specifications subject to change without notice
© 2003 Atlas Sound Printed in U.S.A. 000903 ATS001618 RevA 9/03 SL1-2028
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
SPL in dB
FAP40T Frequency Response
FREQUENCY (Hz)FREQUENCY (Hz)
FAP40T 2nd & 3rd Harmonic Distortion
FREQUENCY (Hz)
SPL in dB
FUNDAMENTAL
3
RD
HARMONIC
2
ND
HARMONIC
FAP40T Impedance
SPL in dB
FREQUENCY (Hz)
FAP40T POLARS
Specifications subject to change without notice
© 2003 Atlas Sound Printed in U.S.A. 000903 ATS001618 RevA 9/03 SL1-2028
2.35
One
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
The loudspeaker system shall be Atlas Sound FAP40T. System shall
include a high performance 4" loudspeaker, ported bass reflex enclosure and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 100Hz to 12kHz (±3dB)
80Hz to 15kHz (±5dB). Sensitivity shall be 87dB average.
Loudspeaker shall be compromised of an 4" cone type driver. Cone
shall be constructed of polypropylene with a butyl rubber surround.
Magnet shall be a minimum of 13oz. (368.5g) and the voice coil
diameter shall be 1" (25mm).
Transformer shall be (70.7/100V) volt type with 1, 2, 4, 8 and 16 watt
primary taps (@70.7V) with a front mounted tap selector switch. This
tap selector switch shall also include a transformer bypass setting for
instances where the 8 ohm FAP40T driver is to be direct coupled with
a low impedance amplifier.
Enclosure shall be an injection molded plastic design acoustically treated with fiber lining. Internal volume shall be 85 cubic inches (1.4L)
To facilitate connection in conduit systems, enclosure shall be equipped
with an access panel covering a recessed terminal cup. This cover shall
provide a 7⁄
8" (22mm inside diameter) hole for top access.
External wiring shall be accomplished via a two pole terminal strip with
screw-down terminals to provide secure wire termination.
The system shall include a tile bridge assembly to reinforce the ceiling
material. The tile bridge shall be designed for use on either 2' x 4'
(609mm x 1219mm) or 2' x 2' (609 x 609 mm) suspended ceiling tiles.
Overall front face diameter shall not exceed 7.375" (187mm); overall
height shall not exceed 7.125" (181 mm).
Grilles shall be press-fit, manufactured from 24 gauge perforated steel
mesh and finished in white epoxy. Round grille shall be 5.5" (140mm)
Diameter.
The loudspeaker shall weigh no more than 4lbs (1.8kg).
The loudspeaker shall be the Atlas Sound FAP40T.
ARCHITECTS AND ENGINEERS SPECIFICATIONS
Loading...