Page 1
FAP33T-W
FAP Strategy III Series 3" Full Range Ceiling Loudspeaker
1/8
FAP33T-W
Features
• 70.7V/100V and 6Ω Operation
• Patented Safety First Mounting System Enables Installation without
Drill or Screwdriver
• Improved Waveguide Provides up to 135° Dispersion
• Ported Enclosure Provides Enhanced Low-Frequency Response
• 4-Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Loudspeakers or Subwoofers
General Description
The FAP33T-W’s 135° dispersion angle can reduce the number of
loudspeakers necessary to achieve coverage in distributed systems
with low ceilings. High quality construction 3" coaxial cone type driver
includes a 20mm voice coil and high efficiency composite cone with
polymer coated cloth surround. A high sensitivity of 89.7dB average
means less power may be required to achieve the desired SPL.
This loudspeaker is factory assembled in an optimally tuned and ported
deep drawn enclosure and includes a specially designed 16-watt low
saturation 70.7V / 100V transformer. A convenient front mounted
selector switch allows tap selection without the need to remove the
loudspeaker from the ceiling. This switch also includes a transformer
bypass setting for 6Ω direct coupled operation.
Three years of development has produced the most innovative, easily
installed, and safety-secure ceiling loudspeakers in the professional
audio market. Patented Safety First Mounting System protects from
over-torquing the mounting doglegs during installation and potentially
cracking or breaking the mounting system. The results are NO install
tools required, NO over-torqued doglegs, NO rusted screws and QUICK
installation.
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 6Ω Direct
Coupled Operation
• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail
Tile Bridge (Included)
• Safety Listed to UL1480 and UL2043
Applications
Retail stores, restaurants, recreational facilities, hotels, convention
centers, and casinos have all changed their thinking on how an in-ceiling
loudspeaker should perform. For many years, good enough was a
loudspeaker that just played dull and lifeless sound. In today’s world,
good enough is no longer accepted because building owners want to
increase their customer’s experience by providing them the best of
everything - including superb sound. The improved waveguide design
provides wider coverage than previous models. The benefit is cost
savings due to fewer loudspeakers required, while still maintaining
uniform sound throughout. The front port has been optimized to enhance
low-frequency response and provide deeper bass. Additionally, the
FAP33T-W is safety listed to both UL1480 and UL2043.
In-ceiling loudspeakers are subjected to various climate and humidity
environments. Competitive offerings use steel screws that easily rust
and fail due to humidity exposure. The FAP33T-W provides corrosion-free,
no-worry operation, since it uses no metal screws holding the doglegs
in position.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 2
System
Type Full Range, Ceiling Loudspeaker
Operation Mode Non-Powered Passive
Operating Range (-10db) 90Hz
Frequency Response (+/- 5dB) 110Hz - 12kHz
Vertical Coverage 130º 800Hz - 4kHz
Horizontal Coverage 130º 800Hz - 4kHz
Max Input Ratings (6Ω) 25W Continuous, 50W Program
Transformer Taps - 70V 16W, 8W, 4W, 2W and Low Impedance (6Ω)
Transformer Taps - 100V 16W, 8W, 4W and Low Impedance (6Ω)
Directivity Factor (Q) 13.98 @ 2kHz
Directivity Factor (DI) 11.45 @ 2kHz
Input Sensitivity at 1W/1m 89.7dB
Max SPL at 1 m (Passive) 104 dB Continuous / 108 dB Peak
Recommended Signal Processing 90Hz High Pass Filter
Recommended Power Amplification 120W at 6Ω
Transducers
LF Transducer Qty and Size 1 x 3"
LF Voice Coil Size 20 mm
MF Transducer Qty and Size N/A
MF Voice Coil Size N/A
HF Transducer Qty and Size N/A
HF Voice Coil Size N/A
Maximum Output 104 dB SPL / 108 dB SPL (peak 6Ω)
Nominal Impedance 6Ω
Minimum Impedance 5.2Ω @ 600Hz
Crossover Frequency N/A
Driver Protection N/A
Enclosure
Color White (RAL 9016)
Enclosure Material Powder Coated CRS
Grille Material Powder Coated CRS, White Finish (RAL9016), Paintable
Baffle Material UL94V-0 PC
Mount Material Zinc Plated CRS
Input Connection 4-Position PHX Type Connector
Controls Front-Face Power Taps / Low Impedance Selector Switch
Mounting/Rigging Provisions Patented Safety First Mounting System
Safety Features 1 Safety Hang Point
Safety Agency Ratings UL Listed to Comply with UL1480, UL2043 and CSA60065.
Ingress Protection IP-21
Environmental Testing Humidity: MIL-STD-810G / High and Low Temperature: -20° and 70° C
Cutout Diameter 7.625" (193.7 mm)
Logo White Removable
Product Dimensions (HxWxD) 8.78" (223 mm) x 8.78" (223 mm) x 5.39" (136.9 mm)
Shipping Dimensions (HxWxD) 12.9" (328 mm) x 28" (711 mm) x 10.55" (268 mm)
Net Weight Unit w/ C-Ring = 4.14 lbs (1.88 kg) 2V-rails = 2.1 lbs (.95 kg)
Shipping Weight 18.12 lbs (8.22 kg) Shipped in Pairs
Warranty Coverage
Warranty Period 5 Years
NOTES:
1. Sensitivity: Half space, 1 meter, 2.83 volts RMS.
2. Power: All power figures are calculated using the rated nominal impedance.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
3. Frequency response and sensitivity are half-space measurements.
12.5 Volts RMS, 21.2 Volts Peak
Suitable for Use in Air Handling Spaces per NFPA 70 and NFPA 90.
2/8
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 3
3/8
90
250 Hz
0
-90
0
-6
-12
-18
-24
90
500 Hz
0
-90
0
-6
-12
-18
-24
90
1000 Hz
0
-90
0
-6
-12
-18
-24
90
2000 Hz
0
-90
0
-6
-12
-18
-24
90
4000 Hz
0
-90
0
-6
-12
-18
-24
90
8000 Hz
0
-90
0
-6
-12
-18
-24
10000
20000
90
250 Hz
0
-90
0
-6
-12
-18
-24
90
500 Hz
0
-90
0
-6
-12
-18
-24
90
1000 Hz
0
-90
0
-6
-12
-18
-24
90
2000 Hz
0
-90
0
-6
-12
-18
-24
90
4000 Hz
0
-90
0
-6
-12
-18
-24
90
8000 Hz
0
-90
0
-6
-12
-18
-24
110
105
100
95
90
85
80
75
70
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
9240 Samples
dB (Pascals)
10000
20000
90
250 Hz
110
105
100
95
90
dB (Pascals)
85
80
75
70
65
60
70
60
50
40
30
-24
-18
-12
0
-90
90
-6
0
500 Hz
-24
-18
-12
0
-90
90
-6
0
1000 Hz
-24
-18
-12
0
-90
90
-6
0
2000 Hz
-24
-18
-12
0
-90
90
-6
0
4000 Hz
-24
-18
-12
0
-90
90
-6
0
8000 Hz
-24
-18
-12
0
-90
-6
0
Frequency Response
9240 Samples
10
20
30
40
50
70
100
200
Frequency (Hz) Octave Smoothing = 50.0%
300
400
500
700
1000
2000
3000
4000
5000
7000
Impedance vs. Frequency Response
8192 Samples, Frequency Res = 5.0 Hz
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
20
dB (Pascals)
10
0
20
30
40
50
70
100
200
300
400
500
Frequency (Hz)
700
1000
2000
3000
4000
5000
7000
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 4
90
250 Hz
0
-90
0
-6
-12
-18
-24
90
500 Hz
0
-90
0
-6
-12
-18
-24
90
1000 Hz
0
-90
0
-6
-12
-18
-24
90
2000 Hz
0
-90
0
-6
-12
-18
-24
90
4000 Hz
0
-90
0
-6
-12
-18
-24
90
8000 Hz
0
-90
0
-6
-12
-18
-24
10000
20000
110
105
100
95
90
85
80
75
70
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
9240 Samples
dB (Pascals)
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
8192 Samples, Frequency Res = 5.0 Hz
dB (Pascals)
70
60
50
40
30
20
10
0
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
Beamwidth (degrees)
360
315
270
225
180
135
90
45
0
6 dB down
10000
20000
90
85
80
75
70
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
dB (Pascals)
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
8192 Samples, Frequency Res = 5.0 Hz
dB (Pascals)
70
60
50
40
30
20
10
0
360
315
270
225
180
Beamwidth (degrees)
135
Directivity Index
4/8
90
45
0
100
20
18
16
14
12
10
8
6
4
2
0
100
200
200
Beamwidth vs. Frequency Response
400
500
300
Directivity Index/Q vs. Frequency
300
400
500
1000
Frequency (Hz)
1000
Frequency (Hz)
6 dB down
700
FAP33T PLR SAM 5 072215 1W 2M
700
2000
2000
3000
3000
4000
4000
5000
5000
7000
7000
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 5
4.75
120.7
5.39
136.8
5.22
132.5
.55
14.0
4.75
120.7
5.39
136.8
5.22
132.5
.55
14.0
8.78
223.0
7.20
183.0
Dimensional Drawings
5/8
8.78
223.0
6.99
177.6
7.20
183.0
5.22
132.5
4.75
120.7
5.39
136.8
.55
14.0
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
22.00
558.70
20.93
531.50
26.09
2.38
60.50
662.58
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 6
Included Accessories
6/8
R5.24
133.0
14.69
373.1
R4.52
114.8
2.99
76.0
Quick Release Tool
Grill Puller
9.13
231.9
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 7
Included Accessories
EGS33W/EGS33B Edgeless Square Grille
7/8
9.25"
234.8mm
.38"
9.6mm
.50"
12.8mm
6.96"
176.8mm
6.92"
175.8mm
EGR33W/EGR33B Edgeless Round Grille
9.21"
233.8mm
.37"
9.5mm
.46"
11.8mm
6.96"
176.8mm
6.92"
175.8mm
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 8
Architect and Engineer Specications
8/8
The loudspeaker system shall be Atlas Sound FAP33T-W. System shall
include a high performance 3" loudspeaker, bass reflex enclosure and
press-fit grille for conventional ceiling installation. Frequency response
for the system shall be 85Hz to 12kHz. Sensitivity shall average 89.7 dB
@ 1W/1m.
Loudspeaker shall be comprised of a 3" cone type driver. Cone shall be
constructed of composite cone with polymer coated cloth surround.
Magnet shall be a minimum of 4.1 oz. (116.2 g) and the voice coil
diameter shall be .79" (20mm). Transformer shall be a 70.7V / 100V type
with 2, 4, 8, and 16, watt primary taps (@70.7V) with a front mounted
tap selector switch to include transformer bypass setting for 6Ω direct
coupled operation.
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 116 in
be equipped with an access panel covering a recessed terminal cup. This
cover shall provide a top access compression fitting / strain relief to facilitate
flexible conduit up to 22mm outside diameter or 1" (25mm inside diameter)
conduit when the compression fitting is removed.
External wiring shall be accomplished via a removable screw-down
wiring connector to provide termination and pre-wiring capability before
loudspeaker installation. The 4 pole connector shall facilitate in/out
connections and shall be located in the recessed area behind the conduit
access panel.
3
. To facilitate connection in conduit systems, enclosure shall
Seismic support eye shall be provided on top of enclosure for additional
suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge deep drawn galvanized metal.
Loudspeaker shall include Safety First Mounting System to eliminate
the potential for steel screws to rust and break causing the dogleg to fail
and resulting in the loudspeaker falling out of the ceiling.
The system shall include a support backing plate to reinforce the
ceiling material and tile support rails for use on either 2' x 4' (609mm
x 1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This
assembly can all be installed from beneath the ceiling tile. Overall front
face diameter shall not exceed 8.78" (223 mm); overall depth from the
bottom of the ceiling shall not exceed 5.39" (136.8 mm). Grilles shall
be press-fit, manufactured from 24-gauge perforated steel mesh and
finished in white epoxy. Round grill shall be 6.99" (177.5mm) diameter.
Loudspeaker shall be safety listed to both UL1480 and UL2043
standards.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005224 RevF 8/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Loading...