Install Sheet
Thank you for purchasing this Atlas Sound BlueBridge™ wall plate controller also known as BBWP. The Atlas
family of BlueBridge™ wall plate controllers allow user access to preset features using buttons or level control
adjustments. The family also offers a variety of mounting options that include wall mount, surface/desktop mount or
equipment rack mount. Each BBWP model includes a unique method to label the assigned functions giving users
general understanding of the controller's function as well as a clean professional look.
This install guide is designed to give installers recommendations on mounting the BBWP models. All models
except the BBWP-TOUCH7 feature the same physical footprint and are designed to fit in a 2-gang electrical box.
The BBWP-TOUCH7 requires a larger installation area and comes with a custom back can. For installation of the
BBWP-TOUCH7, refer to its installation guide.
BBWP-K1 BBWP-S4K1BBWP-K4 BBWP-S4 BBWP-S8
All BlueBridge™ hardware devices are based on Ethernet protocol. BlueBridge™ wall plate controllers connect
to the network via standard Ethernet CAT5e cable. The BBWP’s are powered either by local 5V DC power supply
that is included or by PoE (Power over Ethernet) network switch (not included). Refer to Figure 1 for BBWP
connections. If using the external power supply it is important to pay attention to the wiring polarity. Next to
the external power header the PCB has indicators identifying which terminal is positive and which is negative.
For BBWP Operation, Programming and Addressing; refer to the BlueBridge™ Wall Controller Reference Guide
available at www.atlassound.com/bluebridge. This installation sheet details the steps for hardware connection and
installation into an electrical box and rack panel.
BlueBridge™ Wall Plate Controller
Installation Guide
RJ45 Network
Connection
Local DC Power
(–) (+)
Surface/Desktop Mount
Included with each BBWP is a multi-use back can. This back can is designed to be mounted externally on a wall or
desk. The back can has an angled mounting surface that allows the BBWP to be rotated to meet the desired view
angle. Note: It is always recommended before installing the device to disconnect the power to prevent the power
from shorting to the chassis.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 1 –
Specifications are subject to change without notice.
BlueBridge™ Wall Plate Controller
Installation Guide
Install Sheet
Rack Mount
Many installations require the system controllers to be mounted in an equipment rack. Atlas offers two types
of rack mount panels that work with BBWP models. One is designed to fit 19" full width racks and the other is
designed for use with half width rack designs. The BB-PLT-PNL is for 19" width racks and can support up to three
BBWP units. The Atlas Sound BB-PLT-PNL-HR supports one BBWP unit. Both models are 3RU in height. When
rack mounting BBWP units, they can be powered locally using the included external power supply. Note: The
5VDC power supply can be daisy chained to more than one BBWP in the rack. A PoE switch can also be used in
lieu of the external power supply. Use the
6
⁄32 SAE screws that come in the bag marked SAE.
19" Rack Mount Panel
BB-PLT-PNL
Half Rack Mount Panel
BB-PLT-PNL-HR
Wall Mount
BBWP units can be wall mounted in new or existing construction applications. It is very important to read this
guide in its entirety before starting your installation. Note: Each BBWP model comes installed in a surface mount
angled back can; the 4 screws are M8 metric thread. These screws cannot be used in electrical boxes in the USA.
6
⁄32 SAE screws that come in the bag
Use the
marked SAE.
It is extremely important that the BBWP unit is NOT powered on during the installation or removal process. The
circuit board can short out against the metallic box, damaging the hardware, and possibly the PoE switch.
1
For new construction, a 4" x 4" back box with a minimum depth of 2" and a mud ring with a depth of
⁄2" for proper
clearance are required.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 2 –
Specifications are subject to change without notice.
Install Sheet
Note: Mud rings may vary slightly depending on the manufacturer and depth of the ring itself. It may be necessary
to modify the corners of the mud ring for proper fit. The corners on the right mud ring have a larger radius than the
one on the left and will need a bit of filing for the wall controller to fit. (The Appleton
modification)
BlueBridge™ Wall Plate Controller
Installation Guide
1
⁄2" mud ring will fit without
Small Radius
Fits Perfectly
Under very special situations the wall controller may have to be installed “Live” or in a powered on state. This
is NOT recommended, however, it is possible to insulate the left portion of the mud ring with a large piece of
electrical tape. This will insulate the circuit board while sliding the wall controller through the opening of the
mud ring.
Electrical Tape Provides Insulation
Circuit Board Requires Protection
For existing construction applications, we recommend using a cut-in style mounting ring. (The B-Line cut-in ring
part # BB20L will fit nicely as it lays thin and flat against the wall) Note: If the wall is insulated it is important that
the wall insulation is moved away from the wall controller for proper convection cooling.
Larger Radius Will
Need Modification
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 3 –
Specifications are subject to change without notice.
BlueBridge™ Wall Plate Controller
Installation Guide
Install Sheet
Labeling BBWP Controls
Each BBWP model includes a unique method to label the assigned functions giving users general understanding
of the controller's function as well as a clean professional look. For each function a recessed label area with a
clear cover has been incorporated providing a flush look. The clear cover snaps into place after the label has been
installed. An Excel template is available on atlassound.com that was designed to allow the integrator to create the
needed labels. This template can be found on the Atlas web page under the BlueBridge™ Wall Controllers section.
The maximum label size is .95" W (24mm) x .275" H (6.8mm). A standard office-labeling machine such as a P Touch
or a Brother with 6mm width tape can also be used.
ZONE 1
ZONE 2
ZONE 5
ZONE 3
ZONE 4
BBWP Wall Mounting Requirements
New Construction
1. Back can, 2 gang, 2" deep
1
2. Mud ring, 2 gang
⁄2" or 3⁄4" depending on
installation
Note: The internal corners of different mud ring
brands can vary and interference with the BBWP
PCBs may be an issue. It is important to know
some minor corner modifications may be required.
6
⁄32 x .75" Qty 4
3.
4. CAT5e or CAT6 cable with a RJ45 connector
5. PoE switch or 5VDC external power supply
(included)
Existing Construction
1. 2 gang cut in ring
Note: The internal corners of different cut-in ring/
box brands can vary and interference may be
an issue. It is important to know some minor
corner modifications may be required.
6
⁄32 x .75" Qty 4
2.
3. CAT5e or CAT6 cable with a RJ45 connector
4. PoE switch or 5VDC external power supply
Surface Mount
1. Back can and screws are included in product
carton
2. CAT5e or CAT6 cable with a RJ45 connector
3. PoE switch or 5VDC external power supply
(included)
Rack Mount 19" Width Racks (Up to Three BlueBridge
Wall Plates Per Panel)
1. Atlas Sound BB-PLT-PNL (19" rack panel)
2. CAT5e or CAT6 cable with a RJ45 connector
3. PoE switch or 5VDC external power supply
(included)
6
⁄32 x .75" Qty 4
4.
Rack Mount Half Width Racks (One BlueBridge Wall
Plate Per Panel)
1. Atlas Sound BB-PLT-PNL-HR (half rack panel)
2. CAT5e or CAT6 cable with a RJ45 connector
3. PoE switch or 5VDC external power supply
(included)
6
⁄32 x .75" Qty 4
4.
(included)
©2013 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P.
All other trademarks are the property of their respective owners. ATS004731 RevA 10/13
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 4 –
Specifications are subject to change without notice.
Loading...