Atlas IED AP-S15RTHR User Manual

AP-S15RTHR

AC Power Conditioner & Distribution Unit

Features

• Half Width Rack Design 8.9" Wide with Removable Rack Ears

• Circuit Breaker Protection @ 15A

• 6 Total Outlets

• 4 Rear Panel Switched Outlets

• 1 Rear Panel Unswitched Outlet

• 1 Front Panel Unswitched Convenience Outlet

• Removable IEC Power Cord with a Retainer Bracket

• Remote Activation via Latched Dry Contact Closure or DC Voltage or

EPD (Emergency Power Down) to Integrate with Fire Control Panels

• Remote Status LED Power Terminals

• RFI Noise Filtering to Reduce Radio Frequency Interference

• EMI Filtering to Reduce Electromagnetic Interference

• Service Required Indicator

• Earth Ground Fault Connection Indicator

• Power Switch Cover

• 24VDC 2000mA DC Output

Application

The flexible AP-S15RTHR was designed with features to be used in
a variety of applications. The AP-S15RTHR can be used for protection
against voltage surges and for AC distribution. The AP-S15RTHR can also
be used for power conditioning to eliminate or reduce fuzzy video or
audible static pops. The following are just a few examples of applications
where the AP-S15RTHR can be used:

• Restaurants

• Houses of Worship

• Schools

• Theaters

• Office Buildings

• Sports Bars

©2016 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS0 04926 RevB 1/16

General Description

The AP-S15RTHR has been designed to fit into Atlas half width
equipment racks. The AP-S15RTHR meets or exceeds most installation
requirements for AC power distribution and equipment power protection.
The AP-S15RTHR design offers power management control, remote
activation, 24VDC 2000mA output, noise filtering, spike/surge protection
and six AC outlets making it the most compact, cost effective power
management protection system on the market today.

The AP-S15RTHR features noise filtering for unwanted Radio Frequency
Interference (RFI) that is commonly introduced into AC lines by nearby
radio transmitters or wireless products. EMI filters are incorporated to
reduce noise and Electromagnetic Interference (EMI) from such items
as electric motors and external switching power supplies. The benefit
of these filters can be seen on video products and heard audibly by
reduced static pops and external signal interference.

The AP-S15RTHR can be remotely activated by using dry contact closure
or via a 5V – 24VDC voltage. Either method can be triggered by using
one of the optional Atlas WPD wall plate switches that feature a custom
label area and remote status LED. The AP-S15RTHR also features a
24VDC 2000mA DC output that works in conjunction with the switched
AC Outlets. This 24VDC output provides enough current to power several
Time Saving Device (TSD) preamps, mixers or amplifiers reducing or
eliminating the need for external DC power supplies.

For fire alarm requirements an Emergency Power Down function or EPD
can also be created by using the Remote Activation feature by simply
keeping the Remote Activation contact closed until a condition occurs
that requires a system shut down. When the contacts are open, it will
remove power from the switched outlets. The AP-S15RTHR is unique
by allowing you to select the power cord length that is required for the
installation. A removable 12' IEC power cord with a retainer bracket is
supplied with the unit.

The AP-S15RTHR is designed to be mounted in a half width rack, but
can also be rack mounted into 19" equipment racks by using the optional
PA702RMK kit. This kit allows you mount an AP-S15RTHR by itself or in
conjunction with another Atlas half width rack product such as the
DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19" 1RU space.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

1/2

Specications

Type Power Conditioner & Suppressor

Load Rating 15A / 12A

Safety Listings UL 60950 Standard

Front Panel

Outlets 1 Unswitched

Activation Switch Rocker with Security Cover

Circuit Breaker 15A Resettable

Indicators AC Power On, Outlets Active,

AC Ground Fault

Rear Panel

AC Outlets 5 Outlets Total, 1 Unswitched &

4 Switched

Remote Activation Latching Type Dry Contact Closure or

5V-24VDC

Remote Activation Connector 4 Position 3.5mm Phoenix Type

Connection

24VDC 2000mA Output 4 Position 3.5mm Phoenix Type

Connection

AC Mains IEC Power Socket 15A 1800W

Technical Data

Max AC Mains Current 15A AC Mains Breaker

Operating Voltage 102VAC - 132VAC

Power Consumption 8 Watts

Noise Attenuation RFI 10dB @ 10kHz / 40dB @ 100kHz /

100dB @ 10MHz

Min. Spike Clamping Voltage 460VRMS @ 3,000A

Max. Spike Clamping Voltage 6000V

Max. Spike Clamping Resp. Time 1 nanosecond

Spike Clamping Voltage @ 100A 1250Vp for 20μs

Maximum Surge Current 6,500A

Energy Rating @ 2ms 600 Joules

Temperature Range 5° – 35°C

Humidity Range 5% to 95% Relative Humidity

Mechanical

Chassis Finish Black

Mounting Half Rack Mount, 1 RU,

Optional 19" Rack Kit Available

©2016 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004926 RevB 1/16

Height 1.75" (1RU, 44.5mm)

Width 8.9" (226.1mm) Body with

Rack Ears 10.5" (266.7mm)

Depth 8" (203mm)

Weight 5.5 lbs (2.49kg)

Architect and Engineer Specications

Power conditioner shall be Atlas Sound model AP-S15RTHR. Power
conditioner shall have 6 total outlets: 5 rear panel outlets (4 switched
and 1 unswitched) and 1 front panel, unswitched outlet. Power
conditioner shall include Radio Frequency Interference (RFI) and
Electromagnetic Interference (RMI) filtering to reduce noise in AC lines.
Power conditioner shall have circuit breaker protection at 15A. Unit
shall also include remote activation circuitry to be used with remote
push button or key switch via contact closure on the rear panel. Power
conditioner shall include a 24VDC 2000mA output via rear panel Phoenix
connector. Front panel shall include AC Ground Fault, Service Required,
and Outlets Active LED indicators and protective cover over power
switch. Finish shall be textured black epoxy and dimensions shall be

8.9"W x 8"D x 1.75"H (226.1mm x 203mm x 44.5mm) to mount into 1RU
of space.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

2/2