Atlas IED AP-S15HRIP User Manual

Download

AP-S15HRIP

15A IP LAN Controlled AC Power Distibution & Conditioner with Local & Remote Monitoring

Features

• 15A Rack Mount Power Conditioner with LAN Network

Monitoring & Control

• On-board IP Address Display

• IP Discovery PC Software

• Circuit Breaker Protection @ 15A

• 6 Total AC Outlets

• 5 Rear Panel Programmable Switched Outlets

• 1 Front Panel Unswitched Convenience Outlet

• Individual Outlet On / Off Manual switch and LED Indicator

(Enable / Disable)

• Removable 15A IEC Power Cord with Retainer Bracket

• AC Mains RFI Noise Filtering & Surge Protection

• Earth Ground Fault Connection Indicator

• Web User Interface

• DHCP or Static IP Addressable

• Voltage, Current, Temperature and Humidity Monitoring Capability

• Over Voltage, Current, Temperature and Humidity Alarm Setting

• Each Outlet Can be Individually Managed Remotely

• User Definable Names for Each Outlet

• User Definable Delay Time and Sequence

• Temperature Setting for AC Fan Activation

• Fault Log with Reporting

• Fault Reporting GPIO Port

• Password Protection

• Individual Outlet Auto Ping Reset

• User Definable 24 / 7 Schedules of Individual Outlets to Switch

Devices On or Off

• 3-Meter Humidity / Temperature Probe

• AP-LEDIP Display Panel Shows Voltage, Current, Temperature,

Humidity and IP Address

Applications

The AP-S15HRIP was designed with features to be used in a variety of applications. It can be used for AC distribution or for system power and protection against voltage surges or dropouts. The AP-S15HRIP is ideal for systems that need to be powered On or Off at specific times to conserve energy or to monitor the system for faults and operability. It can also be used for power conditioning and surge protection. The following are examples of applications where the AP-S15HRIP can be used:

• Office Buildings

• Restaurants

• Houses of Worship

• Educational Facilities

• Theaters

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005991 RevD 12/19

• Industrial Applications

General Description

The AP-S15HRIP half-rack width power conditioner with LAN monitoring & remote control for AC power distribution management. The AP-S15HRIP features a local display and a web based user interface (UI) that can monitor voltage, current, temperature and humidity. Through the UI, alarms can be set to alert users when a fault condition has occurred via the network UI or fault contacts. The AP-S15HRIP’s five rear outlets are programmable and can be scheduled to sequence On / Off individually or in groups on a 24-hour / 7-day schedule. Each AC outlet has a front panel LED status indicator that can also be used to manually turn the outlet On or Off. This feature can be disabled via the UI for increased security. A front panel unswitched AC outlet is also included.

The AP-S15HRIP utilizes the AP-LEDIP remote display to visually show the system's AC power and environmental status, as well as the unit's assigned IP address. The AP-LEDIP can be placed within 10ft of the AP-S15HRIP. There is also an IP discovery software to help identify AtlasIED IP power strips connected to the network. The AP-LEDIP also provides a visual reference of the voltage, current, temperature or humidity data within the rack in real time. The external temperature / humidity probe monitors rack climate conditions to activate a cooling system if needed. Programmable alarm settings are easily configured with fault logs and fault reporting via the UI. The unit or individual outlets can be tested or monitored for on active status via the network Auto Ping Reset feature.

The AP-S15HRIP features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products that commonly deteriorate video signals and that can be heard as static in audio signals. Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. The AP-S15HRIP's circuitry is very fast and can suppress unwanted energy within a nanosecond response and sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble-free protection. If damage to the suppression circuitry occurs, the AC fault LED will illuminate. The AP-S15HRIP is designed to allow the installer to select the power cord length that is required for the installation. A removable 2m, 14-gauge IEC power cord with a retainer bracket is supplied with the unit.

The AP-S15HRIP is designed to be mounted in a half-width rack (Note 2), but can also be rack mounted into standard 19" equipment racks by using the optional PA702-RMK rack mount kit. This kit allows you mount an AP-S15HRIP by itself or in conjunction with another AtlasIED half width rack product such as the DPA-102PM, PA40G / PA60G, or MA40G / MA60G in a 19" 1RU space.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

System

Type Networked AC Power Distribution Conditioner & Suppressor

Load Rating Max Load 15A (1800W), Rated Load 12A (1440W)

Network Type LAN (Local Area Network) (Note 1)

Front Panel

Activation Switch Rocker with Security Bar

Circuit Breaker 15A Resettable Power Switch

Outlet On / Off Switches Momentary Manual

AC Outlets NEMA5-15R Unswitched, Qty 1

Front Panel Indicators

Power On Indicator Power Switch LED, Red

Outlet Status Indicators Green, Qty 5

Over Temperature Alarm Indicator Red, Programmable Range 50° - 176°F , 10° - 80°C

Over Humidity Alarm Indicator Red, Programmable Range 15 - 95%

Over Current / Voltage Alarm Indicator Red, Programmable Range High - Voltage 100V - 140V, Under Voltage 80V- 120V

AC Fault Indicator Red, Illuminates When Surge Protection is Damaged

AC Ground Indicator Red, Illuminates When Earth Ground Is Bad

Rear Panel

AC Outlets NEMA5-15R Switched (Programmable), Qty 5

AC Mains IEC Power Socket IEC NEMA 5-15P 15A 1800W with Power Cord Retainer

LAN Port RJ45, Ethernet Port

Temp / Humidity Port RJ14, Temperature, Humidity Probe, 2M, Probe Included

Display Port RJ25, for AP-LEDIP Display for Voltage, Current, Temperature, Humidity, IP Address

Fault Report Port 3.5mm Jack, Fault Reporting Contact Closure, Normally Closed & Opens During Fault State, Cable Included

GPIO Fault Relay Port Fault Relay Interface, Temperature, Humidity, Over & Under Voltage, Over Current, Surge, Cable Included

User Interface and Configuration

WEB Interface HTTP Protocol, XML Commands Available

Status Voltage, Current, Temperature, Humidity, Spike Protection, Ground Fault, Outlet Status

Alarms Voltage Hi / Lo, Current, System Temperature, Humidity, Fault Log

Scheduler 24 / 7, Group Schedule or Individual Outlet Schedule

Network Settings DHCP (default) or Static IP, Individual Outlet Auto Ping Reset (Note 1)

System Configuration Outlet Naming, Group Assignment, Sequence Delay Timing, Temperature Activated Outlet

Technical Data

Max AC Mains Current 12A, 1440W

Operating Voltage 100VAC - 132VAC

Power Consumption 8-Watts

Noise Attenuation RFI 10dB @ 10kHz / 40dB @ 100kHz / 100dB @ 10MHz

Min. Spike Clamping Voltage 460VRMS @ 3,000A

Max. Spike Clamping Voltage 6000V, 1 nanosecond

Spike Clamping Voltage @ 100A 1250Vp for 20µs

Maximum Surge Current 6,500A

Energy Rating @ 2ms 600 Joules

Unit Operating Temperature Range 40º - 105ºF, 5º - 40.5ºC

Humidity Range 5% to 95% Relative Humidity

Fault Reporting WEB, GPIO Contact Closure (Closed During Normal Operation, Opens During Fault Condition), API Commands

Note: Outlet 8 Can Be Used to Activate a Fan Triggered by Temperature Range of On: 51° - 176°F / Off: 50° - 175°F

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Mechanical

Chassis Finish Black

Product Dimensions (HxWxD) 1.75" x 8.83" x 8" (45mm x 224mm x 204mm) - Width with Rack Ears 10.4" (267mm) (Note 2)

Shipping Dimensions (HxWxD) 3.5" x 12.12" x 11.5" (90mm x 308mm x 290mm)

Unit Weight 3.5 lbs. (1.6kg)

Shipping Weight 5.5 lbs. (2.5kg)

Package Contents AP-S15HRIP, Temperature / Humidity Probe, Fault Interface Probe, 2m 14-Gauge IED Power Cord,

Agency Approvals

Safety Listing North America UL1449, UL60950-1, CAN/CSA C22.2 No. 60950-1

IEC Power Cord Retailer Bracket, AP-LEDIP Display, Qty 1 Each

Note 1: The AP-S15HRIP meets the Californian law SB-327. Each unit is shipped with a unique password that can be changed for accessing the device over the network. The AP-S15HRIP is a LAN (Local Area Network) device and requires a firewall or VPN for secure outside the network operation. AtlasIED recommends consulting an IT specialist for best network security practices before installation.

Note 2: The AP-S15HR width fits most rack cabinets that are classified as half-width. There are no industry standards for these types of racks and rack widths may vary between manufactures. AtlasIED recommends checking the distance between the rack rail opening before proceeding. If the AP-S15HRIP is to be mounted into a 19" rack, it can be mounted with any AtlasIED

/2 RU products but requires the PA702RMK rack mount kit.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

AP-S15HRIP System Diagram Example

Fault Report connected to

Texas Toug h Rack wil l

Change Logo Color when

Fault is detected

AP-LEDIP

Included Display

EQUI PMEN T RAC K

WIRE LESS MI C

RECEI VER

SOURC E MEDI A

PLAYER

POWER AMP-1

Local Lan

Router

Outle ts 1 thru 3 - Group S equenced

Progr ammed

Temperature ProbeTemperature Probe

Progr ammed

for Always ON

Contr ol System

Progr ammed

for Fan using

Temp Probe

AtlasIED EFP3-2

Dual Fan Rack Mount

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Dimensional Drawings

1.75"

(45mm)

Switched

Fault Report 4 5 / Fan321

AP-S15HRIP

IP Addressable Power Distribution Unit

Display

LAN

Sensor

10.4"

(264.1mm)

425

OC/OV

AC FaultAlarms

AC Ground

(204mm)

1601 Jack McKay Blvd. • Ennis, TX 75119

800.876.3333 • AtlasIED.com

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ELÉCTRIQUE - NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE

AVIS: NE PAS EXPOSER CE MATÉRIEL À LA PLUIE OU L’HUMIDITE

AFIN DE REDUIRE LE RISQUE D’INFLAMMATION OU DE CHOC ELÉCTRIQUE

I.T.E.

E467418

Made in Taiwan

(224.3mm)

8.83"

Place Serial Number Here

Model: AP-S15HRIP Input: 120Vac 50/60Hz 12A Output: 120Vac 50/60Hz 12A 1440W Maximum

Caution: The socket-outlet shall be installed near the equipment and shall be easily accessible.ID: T

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

AP-LEDIP

This remote magnetic data display comes with a 10ft cable so it can be placed on the rack where data viewing is preferred. This display can show AC mains voltage, current, rack temperature and humidity. The preferred data value to be shown can be set in the WEB interface. The other readings can be accessed by pressing the data display viewing switch located on the front of the display. One of the main features is the display of the IP address assigned to the power strip. Press and hold the data display viewing button and the assigned IP address will scroll.

Magnetic display can be placed outside of the door when closed.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Architect and Engineer Specications

The AtlasIED power conditioner and surge protector with LAN monitoring & remote control shall be AtlasIED model AP-S15HRIP. The AP-S15HRIP shall provide up to 1440-Watts of 120V AC power 6 total AC outlets: 5 rear programmable panel outlets and 1 front panel unswitched outlet.

The AP-S15HRIP shall have a web based user interface (UI). Each unit shall ship with a unique password for accessing a network to comply with the California law SB-327. The AP-S15HRIP shall monitor voltage, current, plus temperature and humidity via an external probe. The AP-S15HRIP shall have alarms set to alert users when a fault condition has occurred via the network UI or via the rear fault contacts. The AP-S15HRIP shall have the ability to program a scheduler to sequence outlet activation as a group or individually.

The AP-S15HRIP shall utilize PC based IP discovery software to identify a unit IP address within a LAN. The assigned IP address is also shown via the included AP-LEDIP remote display. Voltage, current, temperature or humidity shall be monitored via the UI. The external temperature / humidity probe shall measure the rack climate conditions to activate a cooling system if needed. Each outlet shall be tested or monitored for active status via a network Auto Ping Reset feature.

The AP-S15HRIP shall feature noise filtering for unwanted Radio Frequency Interference (RFI). The unit shall have circuit breaker protection at 15A. The AP-S15HRIP front panel shall include AC Ground, AC Fault and Outlets Active indicators and protective security bar over power switch. Finish shall be textured black epoxy and dimensions shall be of a half rack design 1.75"H x 8.83"W x 8"D (45mm x 224mm x 204mm) to mount into 1RU of space. The AP-S15HRIP shall come with rack ears for half rack mounting in half-width equipment racks. The PA702RMK shall be the optional kit for 19" rack mounting.

The AP-S15HRIP complies with UL1449, UL60950-1 and CAN/CSA C22.2 No. 60950-1.

The AtlasIED power conditioner with LAN monitoring & remote control shall be the AP-S15HRIP.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Atlas IED AP-S15HRIP User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual