Atlas HD-200S User Manual

User’s Manuel

ﻝﺎﻣﻌﺗﺳﻹﺍ ﻝﻳﻟﺩ

Main Menu

This menu allows the configuration of your receiver.
Use the keys "Up / Down" to move and "OK" to confirm.
1 - System Settings: Allows a general configuration of your receiver.
2 - Channel Search: Allows the configuration of your installation, the editing of the tran­sponders and the satellites, and the channel search.
3 - Channel Management: Allows the general management of the channels and the edit­ing of the favorites.
4 - Management of storage devices: Allows the management of the storage devices con­nected to a USB port.
5 - Timer Settings: Allows the management of the timer.
6 - Access Control: Allows the management of different settings of the card reader.
7 - Restore / Update data: Allows you to restore the different settings and the update of
the receiver.
8 – SaveData : Used for saving the different settings and adjusting the receiver
9 - System Information: Displays the different information about the receiver and the
different versions of the software.
10 - Quick Installation: Allows a quick installation process of the receiver.

1

1- System Settings

1.1- Regional setiings:

Use the keys "Left / Right" to choose.
* Display Language: Allows you to select the language of the OSD.
* Preferred audio language: Allows you to choose the main audio language of the
channels.
* Secondary Audio Language: Allows you to choose the secondary audio
language of the channels.
* Country Selection: Allows you to choose of the country.
* City Selection: Allows you to choose the city relative to the selected country.
Information about longitude and latitude are updated automatically with the
choice of the city and the country.
If no country is selected, you can introduce the longitude and the latitude manu­ally. To do this insert the value of the longitude and choose the orientation, do the
same for the latitude.

2

1- System Settings

1.2- Date /Time Setting:

Use the keys "Left / Right" to choose.
* GMT Delay: Allows you to select the time zone of your region.
* Daylight Saving Time: Allows you to enable or disable the adjustment of the day­light saving time.
* Automatic Capture Time: Allows an automatic synchronization or not of the time
and the date.

1.3- Audio / Video Settings :

Use the keys "Left / Right" to choose.
* HDMI Format : Allows you to choose the resolution of the HDMI output "480/576p,
480/576i, 720p, 1080i and 1080p. "
* Image Format : Allows you to choose the image aspect 4:3 or 16:9.
* Conversion Mode: Allows the selection of the image adjustment "letterbox, full
screen, panoramic or managed by the TV. "
* Digital Audio Output: Allows you to choose between "PCM and original."
* HDMI Audio Output: allows you to choose between " PCM or the digital audio
output."
* AV Sync Mode: Allows the synchronization of the image with the sound either in
the automatic or the manual mode.
* Audio delay : Activated if the AV sync mode is "user" and allows the setting of the
delay in millisecond.

3

1- System Settings

1.4- Screen Settings:

Use the keys "Left / Right" to adjust.
Use the keys "Up / Down" to move.
It allows the adjustment of the video image and it gives access to three adjustmen
settings : Brightness, contrast and saturation.

1.5- Parental Control:

The default password is "1234".
Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.
* Menu Lock: Porhibits the direct access to the main menu except if you introduce
a password.
* Channel Lock: Activate the lock of the selected channels in the channels editor.
* Use parental info of the channel: Use the information received by the channel
for the treatment of the television program type.
* Age Control: Prohibits or allows the diffusion of a program based on its content.

* Change password: To change the password, press OK to confirm. A window asks

you to enter the old password. If it is correct another window asks you to enter the

new password and confirm it.
A window appears to confirm the success of the procedure or you reintroduce the

password.

4

1- System Settings

1.6- Display settings :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.
* OSD Transparency : Allows the setting of the entire display transparency.
Higher percentage gives a display more transparent.
* Duration of the banner: Allows the setting of the display duration of the information
banner.
* Channel List Behavior: To choose between:

- Volatile List: The channels list disappears during changing a channel.

- Fixed List: The channels list remains despite the change of a channel, it disap­pears by pressing the key "BACK".
* BACK Button Action: To choose between:

- Recent Channel List : Saves the last ten channels displayed , a list appears with
the last ten channels by pressing the "BACK" button.

- Last Channel: Saves only the second last channel displayed (you will be redi­rected to that channel by pressing the button "BACK").
* Show the banner during changes: To display or not the banner when changing
events.

* Show the timer notifications : To display the timer notifications, the display duration

is adjustable in the next option.

* Timer Notifications Duration: Manages the timer notifications duration, press OK

then enter the value you wish.

* Show ECM Info : shows the activity of access control in the banner.

5

1- System Settings

1.7- Different Settings :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.
* Brightness of Server Front Panel Display: Allows you to choose the lighting level
of the server Front Panel Display.

* Automatic Standby : To stop the receiver after a predefined duration "from1 to 8

hours."

* Startup Status: Defines the behavior of the receiver at the start:

- Standby: The receiver switches on standby mode.

- On: The receiver switches on the last channel viewed.

* Standby mode: Defines the behavior of the receiver in standby:

- Economic: Stop all receiver functions.

- Display the time: the receiver is off but the time is displayed on the front panel.
* HDMI on CEC: Allows you to control the receiver using the TV remote control "This
option is only available if your TV supports the CEC mode."

6

1- System Settings

1.8- Network Settings :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.

- DHCP: In enabled mode , it allows to receive the network information of the
network gateway automatically. If the mode is disabled you must enter the values
manually according to your installation.

- DNS Mode: Allows to receive information from remote DNS server automatically,
otherwise you must enter the values manually.

- MAC Address: Displays the MAC address of the receiver, this value can not be
changed.
Press the green button to display the network information:

- Connection status indicates if the receiver is connected to a local network and to
Internet or not.

- Connection speed indicates the rate of data transfer.

7

1- Paramètres système

1.8-network parameters:

Use the "Up / Down" keys to move.
Use the "Left / Right" keys to choose.

Displays the available wireless networks, after a reherche of available networks,
select the desired and enter the network key.
Note: When a selection between the wireless network and ethernet the system
restarts.

8

1- System Settings

1.9- Reset Settings :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.
Access to this option requires a default password "1234"

- Reset system settings: Resets the system settings to their original value.

- Reset timer settings: Delete all programmed event in the timer.

- Reset sat, TP and channels : Deletes all information and modifications made while

searching or editing satellites, transponders and channels.

- Reset key editor data: Cancels all modifications in keys editor values .

- Reset sharing data : Clears all information related to the remote servers.

- Reset all to factory settings: Reset all the settings of the receiver to their initial
values.

A window always appears to confirm the reset settings.

9

2- Channel Search

2.1- Type Of Tuners Installation :

This option is not available on this hardware version .

2.2- Tuners Configuration :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.

Use the "OK" button to confirm.
To configure your installation.

- Antenna Power: Provides power to your LNB or not.

- Installation Type :
* "None" For direct instalation.
* "Diseqc 1.0" for installation with a switch.
* "Diseqc 1.2" for installation with a motor.
* "GoTo X" for installation with an automatic motor.

- Satellite: Allows to choose the configurered satellite.

- Satellite Activity: Allows to enable or not a satellite for an anterior search.

- Reference TP: Allows to choose a reference transponder for each satellite.

- Hight /Low frequency : Allows you to choose the frequency tolerated by the installa­tion.

10

2- Channel Search

2.3- Sat Channels Search :

- Select satellite (s): To select the channels that you want to scan "The satellite must

first be enabled in the tuners configuration "

- Channels Type: To choose between searching TV channels or radio stations or
both at once.

- Encrypted / Clear : To choose between searching clear or encrypted channels or
both at once .

- Search Method: To choose between:
* Auto: Performs a normal channel search according to the transponders database.
* Blind: Performs a new global research of transponders and channels.

- Search Type: To choose between:
* Update: Search if there are new TV channels and radio stations.
* New scan: Makes a new search for channels and radios.

- Network Search(TIN): Performs a data update while scanning.

- Start Search: Allows you to start the search.

11

2- Channel Search

* Search Screen: Displayed during the launch of the research and shows:
1 - TV (New / Old): The new or the old TV channels found.
2 - Radio (New / Old): The new or the old radio stations found.
3 - Search State.
4 - Progress bar.
It’s always possible to cancel the search by pressing the "BACK" button, otherwise
the search ends when the message « Search Completed » appears .
By pressing the "BACK" button a window appears giving you the ability to save or
not

12

2- Channel Search

2.4- Transponders Search :

Allows you to effectuate the same operations as the sat channel search except
that the search in this case is performed by transponder.

2.5- Stellites Editor :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.

Use the "OK" button to confirm.

To add or edit an existing satellite.
Editing a satellite is effectuated by choosing this last then modify the information.
* Name: Press OK to enter the new name
* Orbital position (deg): Press "OK" to enter the digital value in degrees.
* Orbital Orientation: To choose between east or west positioning of the satellite.
Press the green button to add a new satellite and enter its information like in the
previous step.

13

2- Channel Search

2.6- Transponders Editor :

Use the keys "Up / Down" to move.
Use the keys "Left / Right" to choose.

Use the "OK" button to confirm.
To edit , remove or add a transponder.

- Staellite Selection : To choose the satellite in which you want to edit a transponder

.

- Transponder Selection : to choose the desired transponder .

- Polarization : to choose the vertical or horizontal polarization.

- Modulation : to choose the transponder modulation « 8PSK, QPS K and
QPSK S2 ».

- Frequency : shows the slected transponder frequency.

- Symbol Rate : shows the transponder rate.

2.7- Terrestrial Channels Search :

This option is not available in this hardware version.

14

3- Channel Management

3.1- Channel Editor :

Allows you to rename, move, lock or remove channels.
* Channels Window: Indicates the channel’s list and the satellites.
* Channel Information Window : Indicates the satellite, the provider, the encryption
and the belonging to a favorite list.

* Control Window: Before effectuating an order it’s first necessary to choose sev-

eral channels to edit.

- "OK button" to choose channels

- "Menu Button": Gives you the ability to:

TP selection: selects all channels of the transponder.
Sat / Networks Selection: Selects all the satellite channels or network.
Select All: Select all the channels in the list.
Invert Selection: Inverts the channels selection.
Deselect All: Cancels any selection.

- "Red Button": Gives the ability to:

Lock / Unlock: Enables the lock, the channel is only available with a password.

Move the selection: Moves one or more, for that choose the channels to move,
press the red button, select the option « move the selection » , confirm with the OK
button, move to the desired position and confirm with OK.
Remove the selection: deletes the selected channels, a message appears to con­firm the delete.

Add to Favorites: Adds the selected channels to a favorite list from 1 to 10.

- "Green Button": Gives the ability to sort the list by name or number.

- "Yellow Button": Gives the ability to sort by sat or networks, a window appears with
enabled satellites and networks, choose the desired satellite or network then con­firm with OK.

- "Blue Button": Gives you the ability to sort by encryption type, language, encryp-

tion system and HD channels.

- "TV button" toggles between TV channels and radio stations.

- "Play": Displays the channel in the background.

- "TEXT": To rename a channel.

15

3- Channel Management

3.1- Channel Editor :

16

3- Channel Management

3.2- Favorites Editor:

Allows you to rename, move, lock or remove channels in favorites lists.
* Favorites Window: Shows the available channels in a favorite list .
* Channel Information Window : Indicates the satellite, the provider, the encryption
and the belonging to a favorite list.

* Control Window: Before effectuating an order it’s first necessary to choose sev-

eral channels to edit.

- "OK button" to choose channels

- "Menu Button": Gives you the ability to:

Select All: Select all the channels in the list.
Invert Selection: Inverts the channels selection .
Deselect All: Cancels any selection.

- "Red Button": Gives the ability to:
Move the selection: Moves one or more, for that choose the channels to move,
press the red button, select the option « move the selection » , confirm with the OK
button, move to the desired position and confirm with OK.
Remove the selection: deletes the selected channels, a message appears to con­firm the delete.

Add to Favorites: Adds the selected channels to a favorite list from 1 to 10.

- "Green Button": Gives the ability to sort the list by name or number.

- "TV button" toggles between the favorite lists.

- "Play": Displays the channel in the background.

- "TEXT": Allows you to rename the favorite list.

17

3- Channel Management

3- Channel Management

18

4- Storage Devices Management

The storage device must be formatted in "FAT32"

4.1 Storage Devices Options:
* Save capture in: Choose the saving device.
* Screen Capture: Allows you to choose between capturing just the video or the
video and OSD items.
* Provoked Records Duration : Gives you the choice of a continuous recording or a
current program "according to the EPG."
* PVR Jump Time: To choose the time of the PVR jump

19

4- Storage Devices Management

4.2- Storage Devices Utilities:

* Choose the storage device : Allows you to choose a storage device if several
devices are connected.
The bar indicates the use rate of the device. The text indicates the storage capacity,
the used space and the empty space.
* Format The Device: Allows you to delete all stored data.
* Rename The Device: Allows you to effectuate a name to the storage device.

4.3- Recordings List :

The window shows : date, time, name of the recorded program, type, program dura­tion
and storage device.
* The red button is used to delete the recorded programs.
* The yellow button is used to rename the recorded programs.
* The OK button is used to play the recording.

20

4- Storage Devices Management

4.4-Files Explorer:

Indicates the contents of the storage device , the offshoot and the files extension.

21

5- Timer Settings

5.1-Timer Settings:

Indicates the events for the change or the recording of the selected programs.

Adding an event is done through the EPG, the timer menu displays the different
settings.

The menu displays the timer status "active or not",the date,the start time,the end
time, the channel, the mode, the after recording and the type "zap or recording".
These information are recovered from the EPG of the channel.

22

6- Access Control

6.1- Card Reader:

Displays information on the inserted card.

23

7- Restore / Update Data

- Data Source: To choose the files source "usb, serial port or ethernet ".

- Update Application / Boot: Choose the update firmware "KUF extension".

- Update Logo : To choose the update file of startup logo « KCF extension ».

- Update Channels , Satellites and Transponders : To choose the update file of chan­nels lists « KCF extension ».

- Update The Key Editor Data : To update and actualize the keys .

- Update The Sharing Information : To update the remote servers.

- The Progress Bar : indicates the progress of the files installation.

24

8- Data Backup

- Data Source : to choose the destination of the « usb » files backup.

- Backup channels , sattelites and transponders : to backup the lists of sought chan­nels , transponders and satellites.

- Backup the key editor data : to backup the modified keys.

- Backup sharing data : to backup the remote servers information.

25

9- System Information

9.1- Receiver Information :

Displays the various information about the receiver : the serial number, the software
version , the bootloader version, databases "satellites, channels transponders " of
the editor , of the keys and of available satellite tuners.

26

9- System Information

9.2- Channel Information:

Displays different information about the displayed channel.

27

9- System Information

9.3- Network Information :

Displays different information about the network.

9.4- Storage Devices Information:

Displays different information about the storage device.

28