Atlas 5212 Ip phone, 5212 Reference Sheet

5212 IP PHONE REFERENCE SHEET

WHAT DO THESE KEYS DO?

UP/DOWN ARROW KEYS: Used to turn volume of caller up & down when on a call

and to adjust the ringer volume.

SPEAKER: Used to activate/deactivate loudspeaker

MUTE: Enables Mute, for phone’s handset, headset or handsfree microphone.

SUPERKEY: Used for programming Personal keys and accessing various features

CANCEL: Used to cancel your last action

REDIAL: Used to redial the last external number you dialled

HOLD: Used to hold calls (not used for transfer)

TRANS/CONF: Used for enquiry, transfer and conference calls

MESSAGE: Used to send and answer messages

PERSONAL KEYS (12): These keys may be programmed as LINE, GROUP, STATUS,

SPEEDCALL or FEATURE keys however the bottom Right key is your prime key and cannot
be changed-this is your extension

ANSWERING CALLS

To answer a call you must pick-up the handset, press the prime key or press [SPEAKER]
INTERNAL: Single ring, prime key flashes, pick up handset, or press flashing key. Display
shows who is calling you before you answer.

EXTERNAL: Double ring, prime or line key flashes, pick up handset or press flashing key.
CALLS FORWARDED TO YOU: Display shows “from XXXX”, answer as above.

“CALL WAITING - WHAT CAN YOU DO” (Only Available if programmed on feature keys)

While on a call, you hear call waiting tone, you can either hang up or press the [WAIT] feature
key - this holds your current call and brings the waiting call through - press TRADE again to
hold the new call and reconnect to your original call

“SOMEONE ANSWER THAT PHONE!”

Group Pick up: Lift handset and press PICK UP feature key or *6.
To answer any ringing extension dial **6 plus the ringing extension number.

“NEED TO MAKE A CALL!”

OPERATOR CALL - Dial 0.
MAKING INTERNAL/NETWORK CALLS - Just dial the extension number you require.
MAKING EXTERNAL CALLS

Dial 9 and the required telephone number or
Dial System Speedcall code XXXX or
Dial Personal Speedcall code: *1(00-09) or
Press [REDIAL] key for Last Number Redial.

“HOLD ON I’LL FIND OUT!”

To hold a call press the [HOLD] key.
To retrieve a held call press the fast flashing line key.

“WHAT IS THEIR EXTENSION NUMBER?”

Press [SUPERKEY], press * to select “PHONEBOOK”, use dialpad to display first few letters
of the name you want to look up, press 0 to select “LOOK UP”, use 0 to select “NEXT” if
required and when the correct name appears in the screen press * to select “CALL”.

Please note this is a quick reference guide produced for training purposes. Copies of the

manufacturer’s User Guide can be downloaded via www.mitel.com

“I’LL PUT YOU THROUGH!”

To make an enquiry/transfer a call, press [TRANS/CONF] (caller is automatically held), dial
required extension number, wait for answer if necessary and either hang up or press
RELEASE feature key or HANG-UP to transfer the call - or press [CANCEL] to return to
original call.

“LETS SPEAK TO ............... AS WELL”

To set up a conference call: with a call in progress, press [TRANS/CONF], dial the next
person, when they answer, speak privately if required, and when ready, press [TRANS/CONF]
again - a conference is established. Repeat as required.

“CAN’T GET THROUGH!”

If the extension you are calling is busy or there is no answer:
Press [MESSAGE] and hang up - their message lamp will begin to flash immediately or
Press CALLBACK feature key or Dial 6 and hang up. When the extension is free or is next
used an automatic callback will take place or
To Cancel ALL Callbacks: - Press #6 or To Cancel an Individual Callback: - Press ##6 &
extension number.

MESSAGE LIGHT IS FLASHING

Press MESSAGE, press YES, the name of the caller is shown, press MORE for date and time,
and press CALL to be connected.

“GOING SOMEWHERE?”

Calls may be forwarded (to an extension or to voicemail) immediately, when you are busy or if
you don’t answer and may be switched on or off using either the SUPERKEY and pressing
the * & # key or by dialling feature access codes shown

ALWAYS *81+ destination forwards all calls to destination

B-INT *83+ destination forwards internal calls if you are busy
B-EXT *84+ destination forwards external calls if you are busy
B-INT/EXT *85+ destination forwards all calls if you are busy
NA-INT *86+ destination forwards internal calls on no answer
NA-EXT *87+ destination forwards external calls on no answer
NA-INT/EXT *88+ destination forwards all calls on no answer

To CANCEL: dial above code without dialling the destination.

SECRETARIAL SERVICE

This facility allows the Secretary to control the call forwarding facility from his/her
phone. A STATUS key (showing if the Manager is engaged) and a RING key may also
be programmed.

To activate Secretarial Service (from SEC phone) dial *82 plus Manager’s extension number
or press pre-programmed key.
To cancel Secretarial Service (from SEC phone) dial #82 plus Manager’s extension number or
press pre-programmed key.

PROGRAMMING PERSONAL KEYS

Personal Keys may be programmed as SPEEDCALL OR FEATURE keys. Press
[SUPERKEY], press # until “PERSONAL KEYS” appears, press *. Press un-programmed
Personal key, Dial a new number, press the personal key again and Press * to make private
and # to save. Press [SUPERKEY] to exit.

PROGRAMMING PERSONAL SPEEDCALLS (00-09) (if available)

Dial #1 (00-09) 9 plus complete telephone number to be stored hang up.

Please note this is a quick reference guide produced for training purposes. Copies of the

manufacturer’s User Guide can be downloaded via www.mitel.com