Atlantic Furniture AR8736114, AR8836012, AR8031009, AR8131009, AR8132119 Assembly Guide
...
SLAT KIT FULL BED
04
ASSEMBLY INSTRUCTION
( FULL E-65303 )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips head screwdriver and an allen wrench.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
01
02
04
03
01
02
03
03
04
PO :
SLAT SECTION
CENTER RAIL
TALL SUPPORT LEG
SHORT SUPPORT LEG
READY
TO
ASSEMBLE
PARTS LIST
2 SET
2 PCS
4 PCS
4 PCS
HARDWARE
1 1/2” Allen screw - 8 pcs
A
Spare - 1 pc
Step 1
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN
SCREW OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
B
Assemble bed frame according to bed assembly instructions.
If using mattress and foundation set the bed up low and use short support leg.
If using Storage Drawers or Trundle Bed choose the tall support leg.
Step 2
Assemble support leg (03 / 04) and center rail (02).
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other center rail.
C
1 1/4” Wood screw - 8 pcs
Spare - 2 pcs
C
A
A
02
Allen wrench - 1 pc
C
Spare - 1 pc
Adult assembly
A
Allen wrench
03 / 04
1 1/2” Allen screw
03 / 04
Page 1 of 2
SLAT KIT FULL BED
Step 3
Lay the slat kit (01) onto the bed.
Attach center rail (02) to slat kit (01).
Using Allen screw (A), tighten with the Allen
wrench (C).
Repeat for section 2.
A
A
02
01
A
Adult assembly
SECTION 1
A
1 1/2” Allen screw
C
Allen wrench
Step 4
SECTION 2
A
A
SECTION 1
If using a Trundle Bed attach center rail off center
as shown. Repeat for section 2.
B
B
Adult assembly
B
1 1/4” Wood screw
Phillips head
screwdriver
Customer supplied
Be sure to align slat kit evenly with both
ends of ledger strip.
Screw slat kit (01) to side rail, using wood screw (B).
Tighten with Phillips head screwdriver.
Be sure the space between slats is even.
01
Page 2 of 2
Loading...