FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
Warning: Operation of the equipment in a residential environment could
cause radio interference.
Suggestion: Shielded twisted pair (STP) cables must be used with the unit to
ensure compliance with FCC & CE standards.
This User Manual is provided to help you get the most from your VM1600A
Modular Matrix Solution system, which includes the following the following
product models:
Device TypeModelProduct Name
Modular Matrix Switch VM1600A16 x 16 Modular Matrix Switch
Video ReceiverVE805RHDMI HDBaseT Lite Receiver with Scaler
VE816R4K HDMI HDBaseT Receiver with Scaler
Output Board
This manual covers all aspects of installation, configuration and operation. An
overview of the information found in the manual is provided below.
Chapter 1 Introduction, introduces you to the Modular Matrix Solution
system and its components. Its purpose, features, and benefits are presented,
and its front and back panel components are described.
Chapter 2 Hardware Setup, describes how to set up the hardware for your
Modular Matrix Solution installation.
Chapter 3 Front Panel Operation, explains the fundamental concepts
involved in operating the VM1600A at the local site via the front panel LCD
display using pushbuttons.
Chapter 4 Browser Operation, provides a complete description of the
Modular Matrix Solution’s web Graphical User Interface (GUI), and how to
use it to remotely configure and operate the Modular Matrix Solution.
Chapter 5 Mobile Control, introduces you to the Video Matrix Control app
and provides details on its installation requirements.
viii
Modular Matrix Solution User Manual
Chapter 6 CLI Commands, provides a complete list of the serial control
protocol commands used when utilizing the RS-232 Serial Port so that an extra
source device can be utilized in the installation.
Appendix, which provides specifications and other technical information
regarding the Modular Matrix Solution.
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means to
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
→Indicates selecting the option (on a menu or dialog box, for
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
→
Run means to
Product Information
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
ix
Modular Matrix Solution User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://eservice.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-400-810-0-810
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
1-949-428-1111
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
x
Modular Matrix Solution User Manual
Package Contents
Check to make sure that all components are present and that nothing was
damaged in shipping. If you encounter a problem, contact your dealer.
VM1600A
The VM1600A package consists of:
1 VM1600A Modular Matrix Switch
1 Power Module
1Power Cord
1 Terminal Block connector
1 User Instructions
VM7584 / VM8584
The K1 package (300 m) consists of:
1 VM7584 4-Port 10G Optical Input Board or
VM8584 4-Port 10G Optical Output Board
4 SFP+ modules
4 3-pole Terminal Blocks
1 IR Receiver
1 IR Emitter
1 User Instructions
The K2 package (10 km) consists of:
1 VM7584 4-Port 10G Optical Input Board or
VM8584 4-Port 10G Optical Output Board
4 SFP+ modules
4 3-pole Terminal Blocks
1 IR Receiver
1 IR Emitter
1 User Instructions
xi
Modular Matrix Solution User Manual
VM7514 / VM8514
The 4-Port HDBaseT Input / Output Board package consists of:
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
VE805R
The HDMI HDBaseT Lite Receiver with Scaler package consists of:
1 VE805R HDMI HDBaseT Lite Receiver with Scaler
1 Power Adapter
1Terminal Block
1 IR Transmitter
1 IR Receiver
1 User Instructions
VE816R
The 4K HDMI HDBaseT Receiver with Scaler package consists of:
1 VE816R 4K HDMI HDBaseT Receiver with Scaler
1 Power Adapter
1Terminal Block
1 IR Transmitter
1 IR Receiver
1 User Instructions
xiv
Chapter 1
Introduction
Overview
This ATEN Modular Matrix Solution Series is comprised of the VM1600A
Modular Matrix Switch, input boards, output boards, and ATEN video receiver
(VE805R / VE816R).
The VM1600A Modular Matrix Switch offers advanced access and real-time
control of multiple local and remote AV input devices and displays from a
single chassis. Operators can work from 4 x 4 up to 16 x 16 inputs and outputs
simultaneously, as well as incorporate multiple digital video formats within the
setup. It uses TMDS technology to support high speed data transfer at 1080p /
1920 x 1200 @ 60Hz.
The VM7584 and VM8584 (4-Port 10G Optical Input / Output Board) offer an
easy way for the VM1600A to route 4 HDMI sources over long distances via
optical extenders, the VE883 to 4 HDMI-enabled displays. These I/O boards
are able to route uncompressed 4K signal to the VM1600A from up to 300 m
(VM7584K1 and VM8584K1) or 10 km (VM7584K2 and VM8584K2) away
over duplex fiber optic cables. On top of audio and video signal, the optical
fiber also guarantees an interference-free long-haul transmission of IR and
RS-232 control signals.
The VM7514 / VM8514 4-Port HDBaseT Input/Output Boards offers an easy
way to route any of 4 HDBaseT audio/video sources to any of 4 HDBaseT
display devices, in combination with the ATEN Modular Matrix Switch. When
the VM8514 HDBaseT Output Board is used in conjunction with the VE805R
/ VE816R HDBaseT Extender, it features Seamless Switch™ technology and
video wall functionality.
The VM7904 is a 4-Port 4K DisplayPort Input Board that works with an ATEN
Modular Matrix Switch to offer an easy way that routes 4 DisplayPort video
and audio sources to up to 16 or 32 displays. In addition to the DisplayPort
interface that carries digital AV signal, the VM7904 also provides 4 stereo
audio input ports that allow stereo audio to be routed independently or
embedded for HDMI output. Ideal for high-resolution video wall applications,
the VM7904 effectively routes DisplayPort sources with 4K resolution up to
4096x2160@30Hz (4:4:4) and EDID Expert™ technology for the optimum
resolutions across different displays.
1
Modular Matrix Solution User Manual
The VM7814 / VM8814 is a 4-Port 4K HDMI input/output board that works
with VM1600A to route 4 HDMI sources to 4 displays. The VM7814 /
VM8814 is equipped with 4 input/output ports to allow for stereo audio
embedding and audio extraction. The VM8814 supports Seamless Switch
TM
to
ensure real-time video switching, a built-in 4K scaler to handle videos of
different resolutions, and EDID Expert
TM
to ensure high video quality.
The VM7824/VM8824 is a True 4K HDMI input/output board that works with
ATEN Modular Matrix to offer an easy way to route 4 HDMI audio/video
sources to 4 displays with True 4K high-definition images.* In addition to the
HDMI interface that carries digital AV signal, the VM7824/VM8824 also
provides 4 stereo audio input/output ports that enable stereo audio embedding
or HDMI audio extraction.
Note: The VM7824 and VM8824 boards support up to true 4K resolutions
only when installed on the VM3250. When the VM7824 and VM8824
are installed on the VM1600A, the modular matrix will only support
resolutions up to 4K 4:4:4@30Hz or 4:2:0@60Hz.
The VM7804 / VM8804 4-Port HDMI Input / Output Board is a hot-swappable
I/O board that offers an easy way to route any of 4 audio/video sources to any
of 4 displays and installs in the Modular Matrix Switch. The VM8804 supports
Seamless Switch
TM
technology that provides video switching in real-time, a
built in scaler that handles different video resolutions, and EDID Expert™
technology for fast smooth switching between displays. The VM7804 /
VM8804 also supports separate stereo audio signals that can be routed
independently and extracted from embedded HDMI audio signals.
The VM7604 / VM8604 4-Port DVI Input / Output Board is a hot-swappable
I/O board that offers an easy way to route any of 4 audio/video sources to any
of 4 displays and installs in the Modular Matrix Switch. The VM8604 supports
Seamless Switch™ technology that provides video switching in real-time, a
built in scaler that handles different video resolutions and EDID Expert™
technology for fast smooth switching between displays.
The VM7104 4-Port VGA Input Board offers an easy way to route 4 VGA
video and audio sources to 4 displays and speakers. In addition, the VM7104
can be mixed with any modular output boards on the VM1600A for optimum
flexibility.
The VM7404 is a 4-Port 3G-SDI input board provides the capability to connect
to SDI sources, such as 3G-SDI, HD-SDI and SD-SDI, and supports high
quality video resolutions up to 1080p @ 60Hz. The VM7404 also supports
separate analog stereo audio signals for independent routing.
2
Chapter 1. Introduction
The VE805R HDMI HDBaseT Lite Receiver with Scaler or VE816R 4K
HDMI HDBaseT Receiver with Scaler can be combined with an ATEN HDMI
HDBaseT transmitter or splitter to extend your HDMI display up to 70 m from
the source using a single Cat 6a cable (or up to 60 m when using a single Cat
5e cable). With a built-in scaler, the VE805R / VE816R supports the scaling of
different video resolutions. When combined with ATEN HDBaseT output
boards, it supports video wall functionality. In addition, the VE805R / VE816R
is equipped with RS-232 and IR signaling pass-through which allows RS-232
and IR channel control from the remote to local unit, to control the HDMI
source, or from the local to remote unit, to control the display device. The
VE805R / VE816R is HDCP compliant.
Combining these devices, this solution can be conveniently customized,
allowing users to independently switch and route video and/or audio signals to
various monitors, displays, projectors and/or speakers simply by pressing front
panel pushbuttons. The VM1600A’s built-in Scaler encodes video formats in
order to provide seamless, real-time switching while ensuring stable signal
transmission. In addition, the front panel LCD shows a quick view of active
port connections, and includes an option to select an EDID Mode that yields
the best resolution across different monitors.
The VM1600A is easily expandable and accommodates ATEN’s hotswappable I/O boards. Equipped with automatic signal conversion, it allows a
combination of digital video formats, thus making it ideal for large-scale AV
applications.
Setup is fast and easy; install the modular I/O boards by sliding them into the
VM1600A’s rear panel slots, then plug the device cables into the appropriate
ports on the I/O boards and your ready.
This solution can be connected to the network through the VM1600A’s LAN
port, allowing the installation to take advantage of internal Cat 5 Ethernet
wiring built into most modern commercial buildings. Once initial network
setup has been accomplished at the local level, the VM1600A can be
conveniently managed remotely using any web browser or the Video Matrix
Control app. Furthermore, for complete systems integration, the VM1600A’s
built-in RS-232 and RS-485/RS-422 ports allows the switch to be configured
through a high-end controller or PC.
The ATEN Modular Matrix Solution Series is a powerful integrated AV setup
targeted towards broadcasting stations, traffic and transportation-related
control rooms, emergency service centers and any application that requires
customizable high speed AV signal routing.
3
Modular Matrix Solution User Manual
Features
VM1600A
16 x 16 I/O connections via 4 x4 I/O slots for modular matrix boards
Multiple control methods – system management via front-panel
pushbuttons, RS-232/RS-422/RS-485, and Ethernet connections for web
GUI or Telnet
Supports free mobile control using the Video Matrix Control App
4K resolutions – up to UHD (3810 x 2160) and DCI (4096 x 2160) with
refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0)*
Scaler – features a video scaling function to convert input resolutions to
the optimum display resolutions*
Seamless Switch™ – features close-to-zero second switching that provides
continuous video streams, real-time switching, and stable signal
transmissions*
Video wall – allows you to create custom video wall layouts via intuitive
web GUI*
Profile scheduling – plays connection profiles based on user-defined
high-quality display and use of the best resolution across different screens
Audio-enabled – HDMI audio can be extracted and stereo audio can be
embedded*
Bi-directional RS-232 channel – allows you to control connected serial
devices through the web GUI
Supports redundant power module for higher reliability
Hot-pluggable design for easy integration of I/O boards, fan module, and
power supplies
HDCP 2.2 Compatible*
HDMI: 3D, Deep Color, 4K*
Consumer Electronics Control (CEC) supported*
Rack mountable (6U design)
4
Chapter 1. Introduction
Note:
Features marked with an asterisk (*) are supported only with specific I/O
boards. For more information, see the feature descriptions for I/O boards
in this manual.
The maximal output resolution, and the Scaler, Seamless Switch™ and
video wall features are only supported with certain I/O boards. For more
details, refer to the specifications of the particular I/O boards in this
manual.
When Seamless Switch™ or Video Wall is enabled, videos may not
display within range, in which case make sure to adjust the display settings
on your device.
Video outputs will not display 3D, Deep Color, or interlace (i.e., 1080i)
resolutions correctly if Seamless Switch™ is enabled. To use these
features, make sure to first disable Seamless Switch™.
5
Modular Matrix Solution User Manual
VM7584 / VM8584
Compatible with the VM1600A; mix and match with modular output
boards of any type for optimum flexibility
Extends audio, video, IR, and RS-232 control signals over long distances
via duplex fiber optic cables
Superior video quality (up to 4096 x 2160@60Hz 4:2:0) over long
distances:
300 m with VM7584K1 / VM8584K1 over multimode cables
10km with VM7584K2 / VM8584K2 over single-mode cables
Scaler – features a 4K video scaling function to convert input resolutions
to the optimum display resolutions (VM8584 only)
Seamless Switch™ – features close-to-zero-second switching to provide
continuous video streams, real-time switching, and stable signal
transmissions (VM8584 only)
Video wall – allows you to create custom video wall layouts via intuitive
web GUI (VM8584 only)
HDMI (3D, Deep Color, 4K); HDCP 2.2 compatible
Consumer Electronics Control (CEC) support
Bi-directional RS-232 channel – allows you to connect to serial terminals
or serial devices, such as touch screens and barcode scanners
Bi-directional IR channel – IR transmission is processed one direction at a
Support DP1.1 with data rate up to 10.8 Gbps (2.7 Gbps per lane)
HDCP 2.2 Compliant
Hot-swappable design for easy integration and maintenance
Note:
When the VM7904 is used with the VM8514+VE805R/VE816R,
VM8804, VM8814, or VM8604, the Seamless Switch™, scaler, and
video wall functions can be activated.
8
Chapter 1. Introduction
VM7824 / VM8824
Partially compatible with the VM1600A*; mix and match with modular
I/O boards of any type for optimum flexibility
Superior video quality – HDTV resolutions of 480p, 720p, 1080i, and
1080p (1920 x 1080); 4K2K @ 60Hz (4:2:0)
Audio-enabled, HDMI audio can be extracted and stereo audio can be
embedded
Scaler – features a 4K video scaling function to convert input resolutions
to the optimum display resolutions* (VM8824 only)
Seamless Switch™ – features close-to-zero-second switching to provide
continuous video streams, real-time switching, and stable signal
transmissions* (VM8824 only)
Video Wall – allows you to create custom video wall layouts via intuitive
web GUI (VM8824 only)
HDMI (3D, Deep Color)*; HDCP 2.2 Compatible
Cable Quality Tester – examines the HDMI cable quality
Audio-enabled, stereo audio can be embedded into HDMI audio (VM8804
/ VM8814 / VM8824)
Note:
When the VM7104 is used with the VM8514+VE805R/VE816R,
VM8804, VM8814, VM8824 or VM8604, the Seamless Switch™,
scaler, and video wall functions can be activated.
VM7404
Connects up to 4 SDI inputs
Compatible with the VM1600A; mix and match with modular I/O boards
of any type for optimum flexibility
Support SD-SDI, HD-SDI, and 3G-SDI formats
Audio-enabled, stereo audio can be embedded into HDMI audio (VM8804
/ VM8814 / VM8824)
Note:
When the VM7404 is used with the VM8514+VE805R/VE816R,
VM8804, VM8814, VM8824 or VM8604, the Seamless Switch™,
scaler, and video wall functions can be activated.
13
Modular Matrix Solution User Manual
VE805R
Extends HDMI, RS-232, and IR signals up to 70 m over a single Cat 5e/6/
6a cable
HDMI (3D, Deep Color); HDCP 1.4 compliant
Superior video quality – 1080p@60m (Cat 5e/6); 70m (Cat 6a)
Scaler – scales videos of different resolutions to their optimal output for
display and to avoid black screen*
Video Wall – features video wall profiles that allows for custom screen
layouts via an intuitive web GUI*
Seamless Switch™ – close-to-zero second switching that provides
continuous video streams, real-time switching, and stable signal
transmissions*
HDBaseT Anti-jamming – resists signal interference during high-quality
video transmissions using HDBaseT technology
Bi-directional RS-232 channel – allows for control using serial terminals
or serial devices, such as touch screens and barcode scanners
Bi-directional IR channel – IR transmission is processed one direction at a
time*
Firmware upgradeable
Built- in 8KV / 15 KV ESD protection
Plug-and-play
Rack-mountable
Note:
The Seamless Switch™ and the video wall functions are only available
when the VE805R is used with the ATEN HDBaseT I/O boards.
When Seamless Switch™ or Video Wall is enabled, videos may not
display within range, in which case make sure to adjust the display settings
on your device.
When Seamless Switch™ is enabled, video outputs will not display 3D,
Deep Color, or interlace (i.e., 1080i) resolutions correctly. To use these
features, make sure to first disable Seamless Switch™.
The VE805R supports full-frequency IR signals from 30 kHz to 56 kHz.
14
Chapter 1. Introduction
VE816R
Extends HDMI, RS-232, and IR signals up to 100 m over a single
Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable
HDCP 2.2 compatible
Superior video quality (4K up to 100m; 1080p up to 150m)
HDBaseT Long Reach Mode – activated by RS-232 commands, Long
Reach Mode extends signals up to 150 m, 1080p, via a single Cat 5e/6
cable
Scaler – scales videos of different resolutions to their optimal output for
display and to avoid black screen
Video Wall – features video wall profiles that allows for custom screen
layouts via an intuitive web GUI*
Seamless Switch™ – close-to-zero second switching that provides
continuous video streams, real-time switching, and stable signal
transmissions*
HDBaseT Anti-jamming – resists signal interference during high-quality
video transmissions using HDBaseT technology
Bi-directional RS-232 channel – allows for control using serial terminals
or serial devices, such as touch screens and barcode scanners
Bi-directional IR channel – IR transmission is processed one direction at a
time*
Cable Quality Tester – examines the category cable quality through signal
level detection from HDBaseT Matrix Switches to the VE816R.
FrameSync – prevents image tearing by synchronizing the scaler output