The following contains information that relates to China.
ii
VE849 User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://eservice.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-10-5255-0110
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
United Kingdom44-8-4481-58923
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
Package Contents
The VE849T package consists of:
1 VE849T HDMI Wireless Transmitter
1 IR Remote Control with 2 AAA Batteries
1 IR Blaster Cable
1 Power Adapter (VE849T)
1 User Instructions*
The VE849R package consists of:
1 VE849R Multicast HDMI Wireless Receiver
1 Mini USB Power Adapter (VE849R)
1 IR Receiver Cable
1 HDMI Cable
1 User Instructions*
Note: The VE849T and VE849R are sold separately.
Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.
* Features may have been added to the VE849 since this manual was
published. Please visit our website to download the most up-to-date version.
This User Manual is provided to help you get the most from your system. It
covers all aspects of installation, configuration and operation. An overview of
the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the VE849 system. Its purpose,
features and benefits are presented, its front and back panel components and
remote control are described.
Chapter 2, Hardware Setup, describes how to set up your installation. The
necessary steps needed to install the transmitter, receiver, and IR blaster are
explained.
Chapter 3, Operation, explains the fundamental concepts involved in
pairing transmitters and receivers, and operating the VE849, IR Blaster cable,
remote control and EDID management.
An Appendix, provides specifications, troubleshooting, and other technical
information regarding the VE849.
vii
VE849 User Manual
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
Product Information
→ Run means to
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
viii
Chapter 1
Introduction
Overview
The VE849 Multicast HDMI Wireless Extender extends your HDMI display
up to 30m* from the HDMI source to up to four separate receivers using
wireless technology. Easily connect two HDMI source devices, a local HDTV
and up to four receivers connected to HDTVs – wirelessly with crystal clear
image quality capable of streaming Full 1080p with 5.1 channel Dolby digital
audio and 3D technology. Supporting Dynamic Frequency Selection (DFS),
the VE849 is able to operate within the U-NII Worldwide radio band (operating
within this regulated and less commonly used range greatly reduces Wi-Fi
signal interference and improves transmission quality and stability). The
included IR remote control allows you to switch between HDMI source
devices from the receiver side, remotely; and allows you to watch a local and
four wirelessly connected HDTV- simultaneously. The VE849 consists of a
wireless audio/video transmitter and receiver. Consolidate your HDMI
electronics and use the VE849 as a wireless 2-port HDMI switch to connect
remote devices such as Blu-ray players and HD Cable boxes to design your
own custom wireless entertainment space.
* Distance may vary depending on the actual environment; solid objects such
as steel, concrete, or brick may cause interference and shorten the
transmission distance.
1
VE849 User Manual
Features
Wirelessly extend four HDMI displays up to 30m from the HDMI source*
Setup five HDTVs and view HD content on five HDTVs simultaneously*
Connect and transmit wireless video content from your Blu-ray DVD
player, HD Cable box or other HDMI device wirelessly
Multicast signal – 1 transmitter streams HDMI transmissions to 4
receivers simultaneously
Supports Dynamic Frequency Selection (DFS) - greatly reduces Wi-Fi
signal interference for improved transmission quality and stability
HDMI 1.4a compliant
Wireless 3D Supported
Wireless HD in Full 1080p and 5.1 channel Dolby with AC3 and DTS
digital audio
Video Resolutions: 480p, 720p, 1080i and 1080p (24 / 30 / 60fps)
Local Transmitter: 2 HDMI Inputs and 1 HDMI Output
Remote Receiver: 1 HDMI Output
Keep home theater electronic devices neatly out-of-sight
Supports video games consoles with less than 1ms latency
Built-in IR receiver allows control of source devices from the remote side
No software or driver installation needed
HDCP Compliant
Based on WHDI™ Technology - Low latency <1ms
* Distance may vary depending on the actual environment; solid objects such
as steel, concrete, or brick may cause interference and shorten the
transmission distance.
2
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.