![](/html/d0/d08c/d08c296424e755e4025b8fa74571d19805e182b53751f6ba2e8fe3a0bcae4352/bg1.png)
VE814
HDMI Extender over single Cat 5 with Dual Display
Professional A/V Solutions
ATEN’s latest offering delivers high quality videos in dual displays over
distance. With the VE814 HDMI Extender, your HDMI displays can be located
up to 100 meters away from the HDMI source device. This is made possible
using only one Cat 5e/6 cable, which is cheap and easily available. In
addition, your video can be streamed using up to three HDMI displays – dual
displays connected to the receiving unit (VE814R) and another one to the
transmitter unit (VE814T).
The VE814 carries an Ethernet pass-through port for Internet connectivity,
making it easy to go online when necessary. It supports RS-232 and IR
signaling pass-through, allowing you to control the HDMI source device from
the remote unit (VE814R) while also granting access to the HDMI display
device from the local unit (VE814T). The VE814 is HDMI (3D, Deep Color,
4K) and HDCP compatible, ensuring superior video quality so that you get
the most out of your HDMI displays.
Ultra HD
A/V In
HDMI
IR Channel
A/V Out
Remote
Dual Display
HDMI
100
Local Display
RS-232
Channel
Features
• Extends the distance between HDMI source and HDMI display
• Implements HDBaseT extension technology using only one Cat 5 cable to
connect the transmitter and receiver
• Anti-jamming - resists signal interference during high-quality video
transmissions using HDBaseT technology.
• Supports one local and two remote displays
• Supports two IR channels for bi-directional IR signal transmission
• Extends Ethernet communication with pass-through port
• HDMI (3D, Deep Color, 4K); HDCP Compatible
• Long distance transmission – up to 100 m
• Supports widescreen
• Supports resolutions of up to Ultra HD 4K and 1080p Full HD
• Supports up to 340 MHz bandwidth for high performance video
• Signaling rates up to 3.4Gbits
• EDID Expert – selects the optimum EDID settings for smooth power-up
and highest quality display
• RS-232 Serial Port for serial device peripherals, such as touch screens,
barcode scanners, and so on
• Built-in 8KV / 15KV ESD protection (Contact voltage 8KV; Air voltage 15 KV)
• Easy to install – no software required
• Rack Mountable
VE814R
VE814T
Remote Control of
Serial Device
RS-232 to
Serial Device
HDMI Source
IR Receiver
up to 100m
HDMI Display
IR Transmitter
Internet Access
HDMI Source
Device
HDMI
Ethernet
RS-232
IR
Specifications
Function VE814T VE814R
Video Input
Interface
Impedance 100
Max. Distance 1.8 m
Video Output
Interface
Impedance 100
Video
Max. Data Rate 10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock Up to 340 MHz
Compliance
Max. Resolutions /
Distance
Audio
Input
Output
Control
RS-232 1 x Terminal Block, 3 Pole
IR 2 x Mini Stereo Jack Female (Black)
Ethernet 1 x RJ-45 Female
Power
Connectors 1 x DC Jack
Consumption 5.3 VDC, 8.5W 5.3 VDC, 13.3W
Environmental
Operating Temperature 0-50°C
Storage Temperature -20 - 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.45 kg 0.45 kg
Dimensions (L x W x H) 14.17 x 10.30 x 3.00 cm 14.17 x 10.30 x 3.00 cm
1 x HDMI Type A Female
(Black)
N/A
Ώ
1 x HDMI Type A Female
(Black)
2 x HDMI Type A Female
(Black)
Ώ
HDMI (3D, Deep Color, 4K); HDCP Compatible
Consumer Electronics Control (CEC)
Up to 4K@70m (Cat 5e/6) / 100m (cat 6a);
1080p@100m
*4K Supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
1 x HDMI Type A Female
(Black)
1 x HDMI Type A Female
(Black)
2 x HDMI Type A Female
N/A
(Black)
ATEN International Co., Ltd.
3F., No.125, Sec. 2, Datong Rd., Sijhih District., New Taipei City 221, Taiwan
Phone: 886-2-8692-6789 Fax: 886-2-8692-6767
www.aten.com E-mail: marketing@aten.com
Printed 12/2015 V7.0
© Copyright 2015 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their
respective owners.