ATEN PE8108G User Manual

NRGence™ Energy Intelligence Solutions

ECO PDU Power Distribution Unit

PE6108/PE6208/PE8108/PE8208

ATEN has developed a new generation of green energy power distribution units (PDUs) to effectively increase the

efficiency of data center power usage. The PE6108 / PE6208 / PE8108 and PE8208 eco PDUs are intelligent PDUs

that contain 8 AC outlets and are available in various IEC or NEMA socket configurations. They provide secure,

centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage

systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's

health environment via sensors*.

eco PDUs offer remote power control combined with real-time power measurement - allowing you to control

and monitor the power status of devices attached to the PDUs, either at the PDU device or outlet level, from

practically any location via a TCP/IP connection.

eco PDU supports any 3rd party v3 SNMP Manager Software and eco Sensors (Energy Management Software).

eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and user-

friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the

equipment connected to it. With eco Sensors, the Sensor-enabled eco PDU also offers comprehensive power

analysis reports which can separate by departments and locations, providing precise measurements of current,

voltage, power and watt-hour in a real-time display.

With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable,

and most cost effective way to remotely manage power access for multiple computer installations and allocate

power resources in the most efficient way possible.

* Sensors are optional accessories. A sensor-enabled installation is required to generate a more complete energy-efficient

data and chart. Higher sensor installation density is helpful to generate more accurate data.

PE8208A front view PE8208A rear view

1

NRGence™ Energy Intelligence Solutions

Model

PE6108A NEMA 5-15P NEMA 5-15R PDU 12A 12A
PE6108B NEMA 6-15P IEC C13 PDU 12A 12A

PE6108G IEC C14 IEC C13 PDU 10A 10A
PE6208A NEMA 5-20P NEMA 5-20R PDU 16A 16A
PE6208B NEMA 6-20P IEC C13 / C19 PDU 12A / 16A 16A
PE6208G IEC C20 IEC C13 / C19 PDU 10A / 16A 16A
PE8108A NEMA 5-15P NEMA 5-15R Outlet 12A 12A
PE8108B NEMA 6-15P IEC C13 Outlet 12A 12A
PE8108G IEC C14 IEC C13 Outlet 10A 10A
PE8208A NEMA 5-20P NEMA 5-20R Outlet 16A 16A
PE8208B NEMA 6-20P IEC C13 / C19 Outlet 12A / 16A 16A
PE8208G IEC C20 IEC C13 / C19 Outlet 10A / 16A 16A

Power Cord
(IEC C19 to)

Outlets

Monitoring

Level

Per Port Total

Amps

Features

Power Distribution

• Space saving 1U rack mount design with rear mounting

• IEC or NEMA outlet models

• 3 digit 7-segment front panel LED shows Current / IP Address

• Remote users can monitor outlet status via web pages on their browsers

• Safe shutdown support

• Separate power for the unit's own power and its power outlets. The user interface is still accessible even when an

overload condition trips the devices' circuit breaker

Remote Access

• Remote power control via TCP/IP and a built in 10/100 Ethernet port

• Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense,

Ping

,Telnet

• eco PDU Power Management software – eco Sensors

• Supports SNMP Manager V3

Operation

• Local and Remote power outlet control (On, Off, Power Cycle) by individual outlets

• Power-on sequencing – users can set the power on sequence and delay time for each port to allow equipment to be

turned on in the proper order

• Easy setup and operation via a browser-based user interface

• Multibrowser support (IE, Firefox, Chrome, Safari)

• RTC support to keep the timer running during times of no power.

• Supports up to 8 user and 1 administrator accounts

Management

• Power status measurement at the PDU or Outlet level

• LED indicators for current and IP address at the PDU device and/or Outlet levels

• Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU level (PE6108 /

PE6208) and at the outlet level (PE8108 / PE8208)

• Current and voltage threshold setting

• Naming support for outlets

• User outlet access assignment on an outlet-by-outlet basis.

• Event logging and syslog support

• Upgradeable rmware

• Multilanguage support: English, German, Traditional Chinese, Simplied Chinese, Japanese, French, Spanish, Italian

2

NRGence™ Energy Intelligence Solutions

Security

• Two-level password security

• Strong security features include password protection and advanced encryption technologies – 128 bit SSL

• Remote authentication support: RADIUS

eco Sensors Energy Management Software

• Automatic discovery of all PE devices within the same intranet

• Remote real-time power measurement and monitoring

• Remote real-time power outlet management*

• Remote real-time environment sensor monitoring

• Plotting/Monitoring of all PE devices

• Exceed threshold alert through SMTP and Syslog

• Power Analysis Report

Benefits

By simply clicking a button on the UI, administrators can power control the

Remote Power Control

connected IT equipment with ease. There is no longer any need to move around
the data center turning equipment on and off.

Power Management

Overcurrent Protection

Real-time Monitoring

Rack Environment
Monitoring

Early Warning
Notification

Easy Operation – eco
Sensors

eco PDU products are designed with up to 8 outlets for easy data center
management. Each outlet can be individually controlled so that users can set the

power on/off sequence and delay time for each outlet separately. In addition, On/
Off scheduling allows administrators to congure start and shutdown.

Built-in overcurrent protection and recovery saves your money by eliminating costly

onsite service calls. With eco PDU products, you have the ability to access your data

center any time and deal with any situation that may occur – entirely immediately

and effectively.

With PDU/Outlet level metering, IT administrators can easily monitor the real-

time current, voltage, kWH, power consumption, and circuit breaker status of all
connected IT equipment from a remote console.

The eco PDU supports external, environment sensors that allow administrators to

monitor temperature, humidity, and differential pressure of the rack environment
from just about anywhere in the world.

The eco PDU permits data center administrators to set custom thresholds. When

levels exceed the user dened thresholds, designated recipients can receive alarm

notifications via SMTP email, SNMP traps, or Syslog. An audio alarm can also sound
and lights with blink at the local site.

With eco Sensors energy management software support, the Sensor-enabled eco

PDU offers an intuitive and user-friendly Graphical User Interface – allowing you to

configure a PDU device and monitor power status of the equipment connected to
it via an ease-to-use interface.

3

External Authentication
Support

The eco PDU supports login authorization management from external sources –
RADIUS.

• Secure 128-bit SSL encryption

• Two-level password security

Advanced Security

Event Log Support

• Login Failures – The number of consecutive failed login attempts and the time a

remote computer must wait before trying again can be set

• Congurable user permissions for outlet level access and control

The eco PDU supports event log function that records all the events that take place

on – including user login/logout, timeout, outlet ON/OFF/Reboot by user, user add/
delete/changed, eco PDU add/remove and FW upgrade.

Optional Accessories

Sensors

Part No. Sensor

EA1140 Temperature
EA1240 Temperature / Humidity
EA1340 Differential Pressure / Temperature

NRGence™ Energy Intelligence Solutions

Cable Holders

For added safety, use ATEN Lok-U-Plug cable holders to secure the cables from your attached devices in place on the
eco PDU unit. Use only the ATEN Lok-U-Plug cable holders that have been specically designed to work with the eco

PDU. Using any other kind of cable securing device could be highly dangerous.

Part No. Cable Holder

0X12-0017-300G Lok-U-Plug Patent Pending!

Note: Sensor probes and Cable Holders are optional accessories. A 4-sensor installation is required to generate a

complete energy-efficient data and chart. Higher sensor installation density is helpful to generate more accurate
data. 8-port models have 2 sensor ports built-in. All models come with a 10 foot input power cord.

NetworkNetwork

4

Specification

NRGence™ Energy Intelligence Solutions

Function

Power

Outlets

Connectors

LEDs

Switches

I/P Rating

Load Capacity 1440W 1920W 2880W 3840W 2400W 3840W

O/P Rating

Environment

Physical
Properties

Direct 8

Power Inlet 1 x IEC 320 C20

NEMA 8 x NEMA 5-15R 8 x NEMA 5-20R NA

Power

Outlets

Sensor 2 x RJ-11

LAN 1 x RJ-45 (F)

Outlet Status 8 (Orange)

Selections 1-digit 7-segment (Orange)

PDU Current /

Outlet Current / IP

Current / IP 3-digit 7-segment (Orange)

Power 1 (Blue)

10/100 Mbps 1 (Orange / Green)

Link 1 (Green)

Sensor 2 (Green)

Reset 1 x Semi-recessed Pushbutton

Power 1 x Non-fuse Breaker

Per Port

Total

Operating

Temperature

Storage
Temperature

Humidity 0–80% RH Non-condensing

Housing Metal

Weight 2.77 kg/2.80 kg

Dimensions

(L x W x H)

IEC NA 8 x IEC 320 C13

PE6108A /

PE8108A

100–120V~;

50/60Hz; 12A

100–120V~;

50/60Hz; 12A

100–120V~;

50/60Hz; 12A

PE6208A /

PE8208A

100–120V~;

50/60Hz; 16A

100–120V~;

50/60Hz; 16A

100–120V~;

50/60Hz; 16A

2.77 kg/2.82 kg 2.82 kg/2.87 kg 2.79 kg/2.87 kg 2.82 kg/2.87 kg 2.79 kg/2.87 kg

PE6108B /

PE8108B

7 x IEC 320 C13

(Ports 2–8); 1 x

3 (Green)

100–240V~;

50/60Hz; 12A

100-240V;

50/60Hz, 12A

100-240V~;

50/60Hz, 12A

43.24 x 21.93 x 4.40 cm

50/60Hz; 16A

50/60Hz, 12A

50/60Hz, 16A

50/60Hz, 16A

0 to 50˚C

-20 to 60˚C

PE6208B/

PE8208B

C19 (Port 1)

100–240V~;

100-240V;

(C13)

100-240V~;

(C19)

100-240V~;

PE6108G /

PE8108G

8 x IEC 320 C13

100–240V~;

50/60Hz; 10A

100-240V;

50/60Hz, 10A

100-240V~;

50/60Hz, 10A

PE6208G/

PE8208G

7 x IEC 320 C13

(Ports 2–8); 1 x

C19 (Port 1)

100–240V~;

50/60Hz; 16A

100-240V;

50/60Hz, 10A

(C13)

100-240V~;

50/60Hz, 16A

(C19)

100-240V~;

50/60Hz, 16A

5

ATEN International Co., Ltd.

3F., No.125, Sec. 2, Datong Rd., Sijhih District., New Taipei City 221, Taiwan
Phone: [phone] Fax: [phone]
www.aten.com E-mail: [e-mail]

Publish Date: 04/2017 V5.0

© Copyright 2017 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.

All rights reserved. All other trademarks are the property of their
respective owners.