ATEN PE5220s, PE5312sGL, PE5340s, PE5312sGR User Manual
NRGence™ eco PDU PE Series
PE5220s / PE5312sGL / PE5312sGR / PE5340s
Power Distribution Unit
User Manual
www.aten.com
eco PDU PE Series User Manual
FCC, CE Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
CE Warning: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
ii
eco PDU PE Series User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
International http://eservice.aten.com
Telephone Support
For telephone support, call this number:
International 886-2-8692-6959
China 86-10-5255-0110
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8-4481-58923
User Notice
All information, documentation, and specifications contained in this manual are subject to change
without prior notification by the manufacturer. The manufacturer makes no representations or
warranties, either expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the
manufacturer's software described in this manual is sold or licensed as is. Should the programs
prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its
dealer), assumes the entire cost of all necessary servicing, repair and any incidental or
consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by
unauthorized modifications to this device. It is the responsibility of the user to correct such
interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the
correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT
THE VOLTAGE SETTING IS CORRECT BEFORE USE.
iii
eco PDU PE Series User Manual
Set the maximum permissible breaker protection in the building circuitry to the
current rating specified on the rating plate. Observe all national regulations and
safety codes as well as deviations for breakers.
Only connect the PE Device to a grounded power outlet or a grounded system!
Make sure that the total current input of the connected systems does not exceed
the current rating specified on the rating plate of the PE Device.
There is a risk of explosion if the battery is replaced with an incorrect type.
Dispose of used batteries according to the relevant instructions.
PE Device Safety Notice
Consignes de sècuritè relatives à l’unitè PE
Installez sur le circuit du bâtiment des disjoncteurs permettant d’assurer la
protection maximale autorisée, en respectant le courant nominal spécifié sur la
plaque signalétique. Veuillez respecter l’ensemble des réglementations nationales
en vigueur et des codes de sécurité ainsi que les déviations recommandèes pour
les disjoncteurs.
Ne connectez l’unité PE qu’à une prise de courant avec borne de terre ou à un
système mis à la terre!
Assurez-vous que le courant d’entrée total des systèmes connectés ne dépasse pas
le courant nominal spécifié sur la plaque signalétique de l’unité PE.
Il existe un risque d’explosion si la batterie est remplacée par une batterie de type
incorrect. Jetez les batteries usagées en respectant les instructions adequates.
iv
eco PDU PE Series User Manual
Copyright © 2013 ATEN® International Co., Ltd.
Manual Date: 2013-12-23
NRGence and the NRGence logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.
All other brand names and trademarks are the registered property of their respective owners.
Package Contents
The eco PDU PE Series package consists of:
1 PE5220s, PE5312sGL, PE5312sGR, or PE5340s Power Distribution Unit
1 Power Cord (PE5220s only)
1 Rack Mount Kit
1 User Instructions*
1CD-ROM
Check to make sure that all of the components are present and in good order.
If anything is missing, or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the eco PDU or other devices on
the installation.
* Features may have been added to the eco PDU since this manual was
published. Please visit our website to download the most up-to-date version.
v
eco PDU PE Series User Manual
Contents
FCC, CE Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
SJ/T 11364-2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
PE Device Safety Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
Consignes de sècuritè relatives à l’unitè PE . . . . . . . . . . . . . . . . . . . . .iv
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Chapter 1.
Introduction
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Comparison Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PE5220sA / PE5220sB / PE5220sA-AX-J / PE5220sB-AX-J / PE5220sG
Comparison Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PE5312sGL / PE5312sGR Comparison Chart . . . . . . . . . . . . . . . . . . . 3
PE5340sB / PE5340sG / PE5340sJ Comparison Chart . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
eco Sensors Energy Management Software* . . . . . . . . . . . . . . . . . . . 6
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PE5220sB-AX-J / PE5220sB / PE5220sG Front View . . . . . . . . . . . . . 9
PE5220sA-AX-J / PE5220sA Front View . . . . . . . . . . . . . . . . . . . . . . 11
PE5312sGL Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PE5312sGR Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PE5340s Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PE5220s Readout Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PE5312s / PE5340s Readout Section . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 2.
Hardware Setup
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
vi
eco PDU PE Series User Manual
Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PDU Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Securing the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Securing the Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Chapter 3.
Basic Operation and
First Time Setup
Operation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
eco Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
First Time Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Changing the Administrator Login . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Moving On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Chapter 4.
Browser Operation
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
The eco PDU Main Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Page Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Outlet Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Bank Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Administrator Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
The System Log Event List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Date/Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Login Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Working Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Account Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Login String / IP Filter / Mac Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Authentication & Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Private Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
PDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Firmware File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Backup/Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
vii
eco PDU PE Series User Manual
Appendix
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Général . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
The eco PDU’s Main Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Securing the Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Montage sur bâti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Le cordon d’alimentation principale de l’unité d’alimentation éco . . . . 67
Fixation des câbles d’alimentation . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
IP Address Determination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
PE5220sA / PE5220sA-AX-J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
PE5220sB / PE5220sB-AX-J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
PE5220sG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
PE5312sGL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
PE5312sGR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
PE5340sB / PE5340sJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
PE5340sG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Administrator Login Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
viii
eco PDU PE Series User Manual
About This Manual
This User Manual is provided to help you get the most from your eco PDU
system. It covers all aspects of installation, configuration and operation. An
overview of the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the eco PDU system. Its purpose,
features and benefits are presented, and its front and back panel components
are described.
Chapter 2, Hardware Setup, provides step-by-step instructions for setting
up your installation.
Chapter 3, Basic Operation and First Time Setup, explains the
procedures that the Administrator employs to set up the eco PDU network
environment, and change the default username and password.
Chapter 4, Browser Operation, describes how to log in to the eco PDU with
an internet browser, and explains the layout and components of the eco PDU’s
user interface.
An Appendix, provides specifications and other technical information
regarding the eco PDU.
Conventions
This manual uses the following conventions:
Monospaced Indicates text that you should key in.
[ ] Indicates keys you should press. For example, [Enter] means
to press the Enter key. If keys need to be chorded, they
appear together in the same bracket with a plus sign
between them: [Ctrl+Alt].
1. Numbered lists represent procedures with sequential steps.
♦ Bullet lists provide information, but do not involve sequential
steps.
→ Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
means to open the Start menu, and then select Run.
Indicates critical information.
→ Run
ix
eco PDU PE Series User Manual
Product Information
For information about all NRGence™ products and how they can help you
save money in the data center, visit NRGence™ on the Web or contact an
ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and
telephone numbers
International – http://www.aten.com
North America – http://www.aten-usa.com
x
Chapter 1
Introduction
Overview
As part of its NRGence™ line, ATEN has developed a new generation of green
energy power distribution units (PDUs) to effectively increase the efficiency of
data center power usage. The NRGence™ PE5220s, PE5312sGL,
PE5312sGR, and PE5340s are intelligent PDUs that contain 12/20/40 AC
outlets and are available in IEC or NEMA input configurations. The basic
characteristics of each model are shown in the tables on page 4.
The PE5220s, PE5312sGL, PE5312sGR, and PE5340s provide secure,
centralized, intelligent, power management of data center IT equipment
(servers, storage systems, KVM switches, network devices, serial data devices,
etc.), as well as the ability to monitor the data center's environmental health via
sensors*.
NRGence™ eco PDUs offer remote power control combined with real-time
power measurement - allowing you to control and monitor the power status of
devices attached to the PDUs, either at the PDU device or bank level, from
practically any location via a TCP/IP connection.
The eco PDU also offers comprehensive power analysis reports which can
separate departments and locations, providing precise measurements of
current, voltage, power and watt-hour in a real-time display.
Installation and operation is fast and easy: plugging cables into their
appropriate ports and user-friendly browser-based management is all that is
entailed. Since the eco PDU firmware is upgradeable over the net, you can stay
current with the latest improvements by simply downloading updates from our
website as they become available.
NRGence™ eco PDUs support any 3rd party V1, V2, V3 SNMP Manager
Software and NRGence™ eco Sensors software (eco PDU Manager Software).
eco Sensors provide you with an easy method for managing multiple devices,
offering an intuitive and user-friendly Graphical User Interface that allows you
to configure a PDU device and monitor the power status of the equipment
connected to it.
(Continues on next page.)
1
eco PDU PE Series User Manual
(Continued from previous page.)
With its advanced security features and ease of operation, the PE5220s
PE5312sGL, PE5312sGR, and PE5340s eco PDUs are the most convenient,
most reliable, and most cost effective way to remotely manage power access
for multiple computer installations and allocate power resources in the most
efficient way possible.
Note: 1. Sensors are optional accessories. A sensor-enabled installation is
required to generate more complete energy-efficient data readings
and charts. Higher sensor installation density is helpful to generate
more accurate data. See Optional Accessories, page 8, for further
information.
2. eco PDUs are primarily designed for access via Intranet; extra
network security protection is suggested for Internet access usage.
2
Chapter 1. Introduction
Comparison Charts
PE5220sA / PE5220sB / PE5220sA-AX-J / PE5220sB-AX-J / PE5220sG Comparison Chart
Meter-
Model Inlet / Cord Outlets
ing Level
PE5220sA NEMA 5-20P 20 NEMA 5-15R Bank
PE5220sB NEMA 6-20P IEC C13
PE5220sAAX-J
PE5220sBAX-J
PE5220sG IEC 60320
NEMA L520P
NEMA L620P
NEMA 5-15R
IEC C13
IEC C13
Per Duplex
Receptacle
12A (UL),
15A (Max).
12A (UL),
15A (Max)
12A (UL),
15A (Max).
12A (UL),
15A (Max)
C20
PE5312sGL / PE5312sGR Comparison Chart
Model Inlet / Cord Outlets
PE5312sGL IEC 60309
32A
12 Bank1: Outlet
1–6 ; 6 x UK
BS1363
Bank2: Outlet
7 –12 ; 6 x UK
BS1363
PE5312sGR IEC 60309
32A
Bank1: Outlet
1–6 ; 6 x UK
BS1363
Bank2: Outlet
7 –12 ; 6 x UK
BS1363
Metering
Level
Bank
Per Outlet Bank To tal
BS1363:
13A (Max)
BS1363:
13A (Max)
Amps
Outlet
{Per
outlet}
{Per
outlet}
10A 15A
Bank Tota l
(UL),
(Max)
(UL),
(Max)
(UL),
(Max)
(CB),
(Max)
Amps
16A
(Max),
TUV De-
rated 15A
(Max)
16A
(Max),
TUV De-
rated 15A
(Max)
16A
20A
16A
20A
16A
20A
16A
16A
(UL),
20A
(Max)
16A
(UL),
20A
(Max)
16A
(UL),
20A
(Max)
15A
(CB),
16A
(Max)
32A
(Max),
TUV
De-
rated
30A
(Max)
32A
(Max),
TUV
De-
rated
30A
(Max)
3
eco PDU PE Series User Manual
PE5340sB / PE5340sG / PE5340sJ Comparison Chart
Amps
Outlet
10A 15A
Bank Tota l
(UL),
(Max)
(TUV)
(Max)
12A
15A
16A
24A
(UL),
30A
(Max)
30A
(TUV)
32A
(Max)
Model Inlet / Cord Outlets
PE5340sB NEMA L6-30P 40 Bank 1:
PE5340sJ
PE5340sG IEC 60309
32A
Outlet 1–20:
20 x C13
Bank 2:
Outlet 21–40:
20 x C13
Metering
Level
Bank
Per Duplex
Receptacle
12A (UL),
15A (Max)
Note: The PE5340sJ is identical to the B model but has power cords designed
for the Japanese market. For the complete specifications of individual
models, please reference Specifications, page 72.
4
Chapter 1. Introduction
Features
Power Distribution
Space saving 0U rack mount design with rear mounting
IEC or NEMA outlet models
3 digit 7-segment front panel LED shows PDU/Phase / Bank / IP
(PE5312sGL/PE5312sGR/PE5340s), or PDU Amp / IP (PE5220s)
Remote users can monitor PDU / Bank status via web GUI from most
internet browsers
Safe shutdown support
Separate power for the unit's own power and its power outlets. The user
interface is still accessible even when an overload condition trips the
devices' circuit breaker
Remote Access
Remote power control via TCP/IP and a built in 10/100 Ethernet port
Network Protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP,
NTP, DNS, auto sense, Ping
eco PDU Power Management software – eco Sensors
Supports SNMP Manager V1, V2 & V3
Operation
Supports multiple power control methods – Wake on LAN, System after
AC Back, Kill the Power
Power-on sequencing – users can set the power on sequence and delay
time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a browser-based user interface
Multibrowser support (IE, Mozilla, Firefox, Chrome, Safari, Opera,
Netscape)
RTC support to keep the timer running during times of no power.
Supports up to 8 user accounts and 1 administrator account; supports 2
concurrent logins
5
eco PDU PE Series User Manual
Management
Power status measurement at the PDU/Bank level
LED indicators for current and IP address at the PDU device and at the
Bank (PE5340s only) level
Real-time aggregate current, voltage, power, and power dissipation
displayed in a browser-based UI for monitoring at the PDU and bank level.
Environment monitoring – supports external temperature / humidity /
differential pressure sensors for rack environment monitoring
Current and voltage threshold setting
Naming support for outlets
User outlet access assignment on an outlet-by-outlet basis.
Event logging and syslog support
Upgradeable firmware
Multilanguage support: English, Traditional Chinese, Simplified Chinese,
Japanese, German, Italian, Spanish, French, Russian, Korean, Portuguese.
Security
Two-level password security
Strong security features include strong password protection and advanced
encryption technologies – 128 bit SSL
Remote authentication support: RADIUS
eco Sensors Energy Management Software*
Automatic discovery of all PE devices within the same intranet
Remote real-time power measurement and monitoring
Real-time environment sensor monitoring
Plotting/monitoring of all PE devices
Exceed threshold alert through SMTP and System log
Power Analysis report
Note: eco Senors is designed to work with NRGence™ PDUs, and is bundled
with all PE series packages.
6
Chapter 1. Introduction
Requirements
Browsers accessing the eco PDU unit must support SSL 128 bit
encryption.
For cold booting of attached computers, the computer's BIOS must
support Wake on LAN or System after AC Back.
For Safe Shutdown:
The computer must be running Windows (Windows 2000 or higher) or
Linux.
The Safe Shutdown program (available by download from our website
or on the software CD included), must be installed and running on the
computer.
7
eco PDU PE Series User Manual
Optional Accessories
Sensors
Sensors are optional accessories. You can use the eco PDU unit without
sensors. However, if you want to have complete energy management of an
instrumented data center with the use of the eco PDU, you would need to use
eco Sensors software and install 4 sensors for each of the racks to generate a
complete energy-efficient data reading and chart. Higher sensor installation
density is helpful to generate more accurate data. 16/20/24-port models have 2
sensor ports. In this case, Sensor 1 needs to be installed at the intake of the rack
and sensor 2 needs to be placed at the exhaust of IT equipment of the rack. A
sensor-enabled installation is required to generate a more complete energyefficient data reading and chart. Higher sensor installation density is helpful to
generate more accurate data. Available sensors are show in the table, below:
Sensor Part Number
Temperature EA1140
Temperature / Humidity EA1240
Differential Pressure / Temperature EA1340
Sensor Management
Sensors can be managed via the eco PDU’s built-in graphical user interface
(GUI) or with the NRGence™ eco Sensors software that can be downloaded
from the ATEN website. The download link can be found on the software CD
provided with the eco PDU package.
Cable Holders
Cable holders are optional accessories. For added safety, use ATEN Lok-UPlug cable holders to secure the cables from your attached devices in place on
the eco PDU unit. Use only the ATEN Lok-U-Plug cable holders that have
been specifically designed to work with the eco PDU. Using any other kind of
cable securing device could be highly dangerous.
Part Number Description
2X-EA07 Lok-U-Plug Cable Holder (10 pcs)
2X-EA08 Lok-U-Plug Installation Tool (4 pcs)
8
Chapter 1. Introduction
Components
PE5220sB-AX-J / PE5220sB / PE5220sG Front View
1
2
3
5
6
4
9
eco PDU PE Series User Manual
No. Item Description
1 Power Inlet The power cord that connects the unit to an AC
2 Circuit Breaker
Pushbutton
3 Sensor Ports External sensors plug into these two RJ-11 ports.
4 LAN Port and LEDs The cable that connects the eco PDU to the LAN
5 Readout Section, LEDs
and Reset Switch
6 Power Outlets 20 x IEC 60320 C13
power source plugs into this NEMA L6-20R socket
(PE5220sB-AX-J); NEMA 6-20R socket
(PE5220sB); or IEC 60320 C19 socket
(PE5220sG).
As a safety measure, if there is an over-current
situation regarding the device’s power, the circuit
breakers will trip. Press the button to recover
normal operation.
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link: Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN: Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
Details of this section are provided on page 19.
Note: Holes for ATEN Lok-U-Plug cable holders are located around the
outlets. See Securing the Cables, page 25, for further information.
10
Chapter 1. Introduction
1
3
4
5
6
2
PE5220sA-AX-J / PE5220sA Front View
11
eco PDU PE Series User Manual
No. Item Description
1 Power Inlet The power cord that connects the unit to an AC
2 Circuit Breaker
Pushbutton
3 Sensor Ports External sensors plug into these two RJ-11 ports.
4 LAN Port and LEDs The cable that connects the eco PDU to the LAN
5 Readout Section, LEDs
and Reset Switch
6 Power Outlets 20 x NEMA 5-15R
power source plugs into this NEMA L5-20R socket
(PE5220sA-AX-J); NEMA 5-20R socket
(PE5220sA).
As a safety measure, if there is an over-current
situation regarding the device’s power, the circuit
breakers will trip. Press the button to recover
normal operation.
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link: Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN: Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
Details of this section are provided on page 19.
Note: Holes for ATEN Lok-U-Plug cable holders are located around the
outlets. See Securing the Cables, page 25, for further information.
12
Chapter 1. Introduction
1
2
3
4
3
5
6
PE5312sGL Front View
13
eco PDU PE Series User Manual
No. Item Description
1 Power Connection The power cord that connects the unit to an AC
2 Circuit Breakers As a safety measure, if there is an overcurrent
3 Power Outlets* Bank1 : Outlet 1–6; 6 x UK BS1363 (90 Degree)
4 Sensor Ports External sensors plug into these two RJ-11 ports.
5 LAN Port and LEDs The cable that connects the eco PDU to the LAN
6 Readout Section, LEDs
and Reset Switch
power source plugs into an IEC 60309 32A power
supply.
situation regarding the device’s power, the circuit
breakers will trip.
Bank2 : Outlet 7–12; 6 x UK BS1363 (90 Degree)
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link: Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN: Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
Details of this section are provided on page 20.
Note: Holes for ATEN Lok-U-Plug cable holders are located around the
outlets. See Securing the Cables, page 25, for further information.
14
Chapter 1. Introduction
1
2
3
4
3
5
6
PE5312sGR Front View
15
eco PDU PE Series User Manual
No. Item Description
1 Power Connection The power cord that connects the unit to an AC
2 Circuit Breakers As a safety measure, if there is an overcurrent
3 Power Outlets* Bank1 : Outlet 1–6; 6 x UK BS1363 (270 Degree)
4 Sensor Ports External sensors plug into these two RJ-11 ports.
5 LAN Port and LEDs The cable that connects the eco PDU to the LAN
6 Readout Section, LEDs
and Reset Switch
power source plugs into an IEC 60309 32A power
supply.
situation regarding the device’s power, the circuit
breakers will trip.
Bank2 : Outlet 7–12; 6 x UK BS1363 (270 Degree)
plugs in here. The Link and LAN LEDs are built
into the LAN port:
Link: Lights GREEN to indicate that a connection
via the eco PDU's RJ-45 Ethernet port has been
established. Flashes to indicate data is being
transmitted.
LAN: Lights ORANGE to indicate 10 Mbps data
transmission speed. The LED lights GREEN to
indicate 100 Mbps data transmission speed.
Details of this section are provided on page 20.
Note: Holes for ATEN Lok-U-Plug cable holders are located around the
outlets. See Securing the Cables, page 25, for further information.
16
Chapter 1. Introduction
1
2
3
4
3
5
6
PE5340s Front View
17
Loading...