Wireless USB Host Adapter
User’s Guide
Revision A
Author : Binson Tseng
Date : 08/08/2007
1
Table of Contents
1. |
Introduction.................................................................................................................... |
3 |
|
2. |
System Description ........................................................................................................ |
4 |
|
|
2.1. |
UWB PHY ............................................................................................... |
5 |
|
2.2. |
UWB MAC.............................................................................................. |
5 |
|
2.3. |
SPI Flash ................................................................................................... |
5 |
3. |
Hardware Interfaces ....................................................................................................... |
6 |
|
|
3.1. |
USB Interface..................................................................................................... |
6 |
4. |
Document History.......................................................................................................... |
6 |
|
5. |
Radiation Exposure Statement ....................................................................................... |
6 |
|
6. |
Interference Statement ................................................................................................... |
7 |
|
7. |
Coordination Requirements ........................................................................................... |
7 |
2
1. Introduction
This document describes the system, operations, and interfaces of the UWB USB Dongle Demo Board. Two main applications are supported by this dongle. One is wireless USB application and the other one is WiNet mode. For WUSB application, the dongle is used as the host controller, and connect to wired USB device with a wireless DWA hub. WiNet mode is an IP-based network communication, and link up the networks by UWB dongles.
WUSB Application
WiNet Application
3