![](/html/31/31f6/31f6677ff7b3bbcd6abd39b69306eee81aa017cc7ec67fd715333e1b43141807/bg2.png)
2
Table of Contents
1. Introduction.................................................................................................................... 3
2. System Description ........................................................................................................ 3
2.1. UWB PHY and MAC ........................................................................................ 4
2.2. USB-to-Video .................................................................................................... 5
2.3. Display controller............................................................................................... 5
2.4. Memory.............................................................................................................. 5
3. Hardware Interfaces....................................................................................................... 5
3.1. VGA Interface.................................................................................................... 5
4. Document History.......................................................................................................... 6
![](/html/31/31f6/31f6677ff7b3bbcd6abd39b69306eee81aa017cc7ec67fd715333e1b43141807/bg3.png)
3
1. Introduction
This document describes the system, operations, and interfaces of the WUSB
VGA adapter Demo Board. For WUSB application, a dongle is used as the
host controller, and connect wirelessly to a video device with the WVGA
adapter.
WVGA Application
2. System Description
The UWB VGA adapter supports the following functions:
Certified WUSB mode
Support 53.3M, 80M, 106.7M, 160M, 200M, 320M, 400M, 480Mbps.
Support VGA interface.
The UWB WVGA system consists of three chips – 1) Integrated UWB PHY
and MAC (RTU7105), 2) USB-to-Video chip (DL160), and 3) a display
controller IC (CH7301C). A serial flash memory (4Mb) is required to store
proper data/commands for RTU7105. To make the system work properly, the