ATEN CS-1200L User Manual
User Manual
CS-1200L
Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the units and/or
any devices that connect to them.
This package contains:
M 1 CS-1200L Slideaway Console
M 1 KVM Connector Cable
M 1 AC Power Cord
M 1 Rack Mounting Kit
M 1 User Manual
If anything is damaged or missing, contact your dealer.
© Copyright 2003 ATEN® International Co., Ltd.
Manual Part No. PAPE-1232-100
Printed in Taiwan 08/2003
All brand names and trademarks are the registered property of their respective owners.
2003-07-31
Warning!
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
2003-07-31
Overview
The CS-1200L is a KVM console module featuring an
integrated 15" LCD panel, full keyboard, and touchpad in a 1U,
rack-mountable, Slideaway housing. It was developed in
response to the enormous popularity of the Slideaway
console found on the ACS-1208AL and ACS-1216AL KVM
switches.
The ACS-1208AL/ACS-1216AL is made up of two major
modules: the front-end Slideaway KVM Console module, and
the back-end KVM Switch module. The CS-1200L is similar to
the Console module found on the ACS-1208AL/ACS-1216AL,
except it has been redesigned to serve as the front end for
other Master View KVM switches, as well.
By only having to purchase the CS-1200L console module,
users who already have a Master View switch can take
advantage of the space saving and efficiency benefits of the
ACS-1208AL/ACS-1216AL’s Slideaway console without the
unnecessary expense of having to purchase its KVM Switch
module.
Setup is fast and easy. Simply use the supplied KVM connector
cable to link the CS-1200L’s KVM ports to the console ports of
your KVM switch and you are ready to go.*
* The CS-1200L supports most Master View KVM switches
that have PS/2 console port connectors. If you are unsure if
your switch is supported, check with your dealer or call Aten
Customer Service.
- 1 -
2003-07-31
Features
KVM console (15" LCD display - 88-key keyboard -
M
touchpad) in an integrated 1U rack-mountable Slideaway
housing
Protects former Master View KVM switch investment
M
Enjoy the space-saving, efficiency benefits of the
M
ACS-1208AL/ACS-1216AL’s 1U rack-mountable
Slideaway console without the expense of its KVM switch
module
Keyboard/Touchpad section is easily removed for quick
M
repair or replacement
Sleep mode when the Slideaway cover is closed
M
Superior video quality - supports resolutions of up to 1024 x
M
768
Rack mountable in 19" system rack (1U)
M
Hardware Requirements
The CS-1200L supports most Master View KVM switches
M
that have PS/2 console port connectors. If you are unsure if
your switch is supported, check with your dealer or call Aten
Customer Service.
For optimum signal integrity we strongly recommend you
M
use the CS Custom KVM cable that was supplied with this
package.
- 2 -
2003-07-31
Front View
3
1
2
8
7
4
5
6
1. Handle
Pull to slide the KVM module out; push to slide the module in.
2. LCD Monito r
After sliding the KVM module out, flip up the cover to access
the LCD monitor, keyboard and touchpad.
3. Keyboard
4. Power LED
Lights BLUE to indicate that the unit is receiving power.
- 3 -
2003-07-31
Loading...