Aten CL5708M-ATA-EE, CL5716M-ATA-EE Datasheet
CL5708/CL5716
Slideaway™ LCD KVM Switch
The CL5708 / CL5716 Slideaway™ LCD KVM Switch series are control units that
allow access to multiple computers from a single PS/2 or USB KVM (keyboard,
video, and mouse) console. A single CL5708 or CL5716 can control up to 8
or 16 computers. As many as 31 additional KVM switches can be
daisy-chained to the CL5708 / CL5716, so that up to 512 computers can
all be controlled from a single KVM console.
The CL5708 / CL5716 offers a space-saving, streamlined
approach to KVM switch technology by integrating a
keyboard, 17" or 19" LCD monitor, and touchpad in a 1U
rack-mountable sliding housing. For added security, an
optional fingerprint identification system* can be used to
control access to the CL5708 / CL5716, and the servers
under its command.
The CL5708 / CL5716 is built on a modular design. The KVM section can be detached from the switch section
for convenient maintenance and repair.
FEATURES
• Integrated KVM console with 17”or 19“ LCD monitor in a Slideaway™ housing
• Available with or without Fingerprint Identification Reader
• Space saving technology – up to two consoles (one bus) control up to 8 or 16 computers
• Daisy-chain up to 31 additional units – control up to 256 (CL5708) or 512 (CL5716) computers
from a single console. (With compatible KVM Swithces: ACS1208A, ACS1216A, CS1708A,
CS1716A)
• Dual Interface –supports computers and console with PS/2 or USB keyboards and mice
• LCD module USB port allows each computer to access USB peripherals
• LCD module rotates up to 115 degrees for a more comfortable viewing angle
• Multiplatform support – Windows, Linux, Mac, and Sun
• Supports multimedia USB keyboards for PC, Mac and Sun
• Auto PS/2 and USB interface detection
• Keyboard and mouse emulation (PS/2 and USB) for smooth switching and simultaneous booting
of multiple computers even when the console focus is elsewhere
• Supports external USB mouse
• Superior video quality – supports resolutions up to 1280 x 1024 @ 75 Hz
p1
• No software required – convenient computer selection via front panel pushbuttons, hotkeys and
multilingual on-screen display (OSD) menus
• Auto-senses station's position on daisy-chained installations; no need for manual dip switch
setting; front panel led indicates station's position
• Port names automatically reconfigured when station sequence is changed
• Two level password security – only authorized users can view and control computers
• Supports one administrator and four user accounts with separate profiles
• Auto Scan mode enables continuous monitoring of user-selected computers
• Broadcast support – commands from the keyboard can be broadcast to all available computers
on the installation
• Hot pluggable – add or remove computers without having to power down the switch
• Beeper on/off via hotkey and OSD
• Firmware upgrades to all the chained KVM switches at the same time via the daisy-chain cable
Benefits
USB Port
Extra USB mouse port
Fingerprint Identification*
Flexibility
Multilanguage support
Broadcast mode
A
An additional USB port located under the LCD panel is available to connect
peripheral devices (flash drive, CD-ROM drive, etc.) to the switch. USB
peripherals can be used to install software, OS patches, or make system
backups to computers connected to the installation from the CL5708 / CL5716.
For added convenience, a USB mouse port is provided for users who prefer to
use an external mouse.
The fingerprint reader can be used as an alternate means of logging in to the
switch. From 1 to 4 fingers can be scanned for each user and the
administrator, with any one of the recorded fingerprints used to log in.
The LCD module rotates up to 115 degrees for a more comfortable viewing
angle.
The CL5708/CL5716 supports the following OSD languages: English, German,
Japanese, Traditional Chinese and Simplified Chinese.
When this function is in effect, commands sent from the console are broadcast
to all available computers on the installation.This function is particularly useful
for operations that need to be performed on multiple computers, such as
performing a system wide shutdown, installing or upgrading software, etc.
B C
A
B
C
* Models with Fingerprint, Identification Reader Only.
p2
Loading...