Atec VDS200N User Manual

KARTA KATALOGOWA > VDS 200N-series > 20120419
VDS 200N SERIES
VOLTAGE DROP SIMULATOR - BATTERY SUPPLY SIMULATION AND DC VOLTAGE SOURCE
DO BADAŃ ZGODNIE Z ...
> Audi (Reference vehicles) > BMW - (Airbag ECU) > BMW 600 13.0 (Part 1) > BMW 600 13.0 (Part 2) > BMW GS 95002 (1999) > BMW GS 95002 (2001) > BMW GS 95003-2 > BMW GS 95024-2-1 (2010-01) > Case New Holland ENS0310 > Chrysler CS-11809 (2009) > Chrylser CS-11979 > Chrysler PF-9326 > Cummins 14269 (982022-026) > DaimlerChrysler DC-10615 > DaimlerChrysler DC-10842 > DaimlerChrysler PF-10541 > DIN 72300-2 > EN 300329 > EN 300340 > EN 300342-1 > EN 301489-1 > ...
VDS 200N - BATTERY SUPPLY SIMULATOR AND DC VOLTAGE SOURCE
The VDS 200N series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS 200N series as there is a large variety of requirements. Secondly, the VDS 200N series serve as powerful DC voltage supplies for the DUT during the tests with automotive transients. The VDS 200N series covers all three supply voltage categories. Their current capability ranges up to 200A depending on the model and your application.
HIGHLIGHTS
> Voltage up to 60V
OBSZARY ZASTOSOWAŃ
AUTOMOTIVE
> Current up to 200A (peak up to 1,000A) > Bipolar-amplifier models available
TELECOM
> Low output impedance > Powerful DC voltage source
MILITARY
> Pulses 4 and 2b (ISO 7637-2/ISO 16750-2)
AVIONICS
> Pre-programmed test routines to simulate various
supply waveforms
www.emtest.com © EM TEST > STRONA 1/5
KARTA KATALOGOWA > VDS 200N-series > 20120419
PARAMETRY TECHNICZNE
MODEL OVERVIEW
AVAILABLE VDS 200N-MODELS
VDS 200N10 Voltage Drop Simulator, 60V/10A VDS 200N15 Voltage Drop Simulator, 60V/15A VDS 200N30 Voltage Drop Simulator, 60V/30A VDS 200N30.1 Bipolar Voltage Drop Simulator,
60V/30A and 30V/50A VDS 200N50 Voltage Drop Simulator, 60V/50A VDS 200N50.1 Bipolar Voltage Drop Simulator,
60V/50A and 30V/85A VDS 200N100 Voltage Drop Simulator, 60V/100A VDS 200N150 Voltage Drop Simulator, 60V/150A VDS 200N200 Voltage Drop Simulator, 60V/200A
TECHNICAL DETAILS
TECHNICAL DETAILS
VDS 200N30
Output voltage 0V - 60V Output current 0A - 30A, continuous Peak current 70A for max. 500ms Frequency range DC to 100kHz *) Supply voltage 230V (US-type 208V) Dimensions 19"/9HU Weight app. 69kg
VDS 200N30.1
Output Range I Output voltage -5V - +30V Output current 50A continuous Peak current 150A for max. 200ms Output range II Output voltage -5V - +60V
VDS 200N10
Output voltage 0V - 60V Output current 0A - 10A, continuous Peak current 15A Frequency range DC to 100kHz *) Supply Voltage 115/230V Dimensions 19"/6HU Weight app. 49kg
VDS 200N15
Output voltage 0V - 60V Output current 0A - 15A, continuous Peak current 15A Frequency range DC to 100kHz *) Supply voltage 115/230V Dimensions 19"/6HU Weight app. 49kg
Output current 30A continuous Peak current 90A for max. 200ms Reverse power 1,200Watt continuous, up to
nominal current Frequency range DC to 100kHz *) Supply voltage 3x400V (US-type 3x208V) Dimensions 19"/12HU Weight app. 65kg
VDS 200N50
Output voltage 0V - 60V Output current 0A - 50A, continuous Peak current 100A for max. 500ms Frequency range DC to 100kHz *) Supply voltage 3x400V (US-type 3x208V) Dimensions 19"/12HU Weight app. 114kg
www.emtest.com © EM TEST > STRONA 2/5
KARTA KATALOGOWA > VDS 200N-series > 20120419
PARAMETRY TECHNICZNE
TECHNICAL DETAILS
VDS 200N50.1
Output range I Output voltage -5V - +30V Output current 85A continuous Peak current 220A for max. 200ms Output range II Output voltage -5V - +60V Output current 50A continuous Peak current 150A for max. 200ms Reverse power 2,400Watt continuous, up to
nominal current Frequency range DC to 100kHz *) Supply voltage 3x400V (US-type 3x480V) Dimensions 19"/16HU Weight app. 120kg
TECHNICAL DETAILS
VDS 200N200
Output voltage 0V - 60V Output current 0A - 200A, continuous Peak current 200A Frequency range DC to 100kHz *) Supply voltage 3x400V (US-type 3x480V) Dimensions 19"/34HU Weight app. 450kg
VDS 200N100
Output voltage 0V - 60V Output current 0A - 100A, continuous Peak current 150A for max. 500ms Frequency range DC to 100kHz *) Supply voltage 3x400V (US-type 3x480V) Dimensions 19"/16HU Weight app. 150kg
VDS 200N150
Ouput voltage 0V - 60V Output current 0A - 150A, continuous Peak current 150A Frequency DC to 100kHz *) Supply voltage 3x400V (US-type 3x480V) Dimensions 19"/34HU Weight app. 400kg
www.emtest.com © EM TEST > STRONA 3/5
KARTA KATALOGOWA > VDS 200N-series > 20120419
PARAMETRY TECHNICZNE
COMMON DATA (ALL MODELS)
GENERAL
Source impedance Zi = <10mohm Voltage deviation <1V with resistive load (including
inrush current) recovering 63% of its
maximum excursion within 100us Ripple voltage Ur <0.2Vp-p, frequency min. 400Hz Sinusoidal signal
capability vs. Frequency *)
*) Vpp max. 3V up to 100kHz via
*) VDS 200N30.1 and VDS 200N50.1:
Fuses Depending on VDS 200N model
TRIGGER
Vpp max. 16V up to 20kHz
Vpp max. 10V up to 30kHz
Vpp max. 6V up to 50kHz
Analog In, controlled by
AutoWave/AMP 200Nx only
Vpp max. 65V resp. 35V up to 50kHz
with respect to the selected voltage
range
Vpp max. 3V up to 100kHz via
Analog In, controlled by
AutoWave/AMP 200Nx only
COMMON DATA (ALL MODELS)
TEST ROUTINES FOR ARBITRARY WAVES
DC source Max. 60V; current depending
on VDS 200N model
Functions Sine Wave Sweep
Sine Wave (Cranking) Clipped Load Dump Jump Start Extern GM 9105P Pulse 4 Drop and Jump pulse
Standard Test routines
Service Service, Setup, Self test
INTERFACE
Serial interfaxe USB Parallel interface IEEE 488, addresses 1 - 30 Remote control To connect an external signal
ISO 7637, Pulses 2b and 4 ISO 16750-2 Jaso Test 1
generator (10kohm): 0-10V / 0-50kHz max. 0.5V(p-p) / 0-100kHz
Automatic Automatic release of the events Manual Manual release of a single pulse External External release of a single pulse
OUTPUT
DUT Supply +/- Safety laboratory or high current
connectors Ext. trigger 5-15V TTL; BNC connector CRO Trigger 5V TTL-signal for oscilloscope
OPTIONS
AutoWave Arbitrary generator for more complex
test requirements
iso.control Software to control the test,
including standard library, test report facility and data conversion generator
www.emtest.com © EM TEST > STRONA 4/5
KARTA KATALOGOWA > VDS 200N-series > 20120419
KOMPETENTNI, GDZIEKOLWIEK BYŚ BYŁ
BEZPOŚREDNI KONTAKT Z EM TEST
Szwajcaria
EM TEST (Switzerland) GmbH > Sternenhofstraße 15 > 4153 Reinach > Switzerland Telefon +41 (0)61/7179191 > Fax +41 (0)61/7179199 Internet: www.emtest.ch > E-mail: sales@emtest.ch
Niemcy
EM TEST GmbH > Lünener Straße 211 > 59174 Kamen > Deutschland Telefon +49 (0)2307/26070-0 > Fax +49 (0)2307/17050 Internet: www.emtest.com > E-mail: info@emtest.de
Francja
EM TEST FRANCE > Le Trident - Parc des Collines > Immeuble B1 - Etage 3 > 36, rue Paul Cézanne > 68200 Mulhouse > France Telefon +33 (0)389 31 23 50 > Fax +33 (0)389 31 23 55 Internet: www.emtest.fr > E-mail: info@emtest.fr
Polska
EM TEST Polska > ul. Ogrodowa 31/35, 00-893 Warszawa > Polska Telefon +48 (0)518 64 35 12 Internet: www.emtest.com/pl > E-mail: info.polska@emtest.de
Wszystkie informacje dotyczące dostaw, wyglądu zewnętrznego i danych technicznych opisujących aktualny stan wraz z datą publikacji mogą ulec zmianie bez wcześniejszych informacji.
USA / Kanada
EM TEST USA Inc. > 9250 Brown Deer Road > San Diego > CA 92121 Telefon +1 (858) 699 1685 > Fax +1 (858) 458 0267 Internet: www.emtest.com > E-mail: tom.revesz@ametek.com
Chiny
EM TEST Representative Office Beijing > Rm 913, Leftbank > No. 68 Bei Si Huan Xi Lu > Haidian District > Beijing 100080 > P.R. China Telefon +86 (0)10 82 67 60 27 > Fax +86 (0)10 82 67 62 38 Internet: www.emtest.com > E-mail: emtestbj@public.bta.net.cn
Malezja
EM TEST (M) SDN BHD > Unit B2-6, Jalan Dataran SD2 > Dataran SD2, PJU9 > Bandar Sri Damansara > 52200 Kuala Lumpur > Malaysia Telefon +60 (03)62 73 22 01 > Fax +60 (03)62 74 22 01 Internet: www.emtest.com > E-mail: sales@emtest.com.my
www.emtest.com © EM TEST > STRONA 5/5
Loading...