Atec TDI-XBL-6000 User Manual
XBL S
ERIES
6000
• Excellent Programming Accuracy
• High Speed Programmable Slew Rate
• Ethernet Control
• Closed Box Calibration
• RBL Command Support
• Pulse Load Shaping
• Full Range Switching
• 19 inch Rack Mount
The XBL Dynaload Series features 800, 2000,4000, and 6000 watt models with wide range voltage inputs and sophisticated
computer programming via GPIB, Ethernet, or RS232. These units feature an integrated web page for local system operation
and control.
Individual models are available for specialized low voltage high current applications. High voltage models up to 1000 volts are
also available.
All models include easy to apply master slave parallel capabilities and closed box calibration. Higher power models
incorporate variable speed forced air cooling to assure a quiet environment.
GENERAL SPECIFICATIONS (PRELIMINARY)
OPERATION
Constant Current:
Prog. Accuracy: .1% of setpoint ±5ma
Resolution(IEEE): .0015% of selected full scale
Constant Resistance: Constant Resistance mode operates in
Amps/Volt, IEEE
units entered in ohms or A/V
Prog. Accuracy: 1% of setpoint +- 5 ma
Resolution(IEEE): .0015% of selected full scale
Constant
Constant Power: 0 to full scale power
AN
Ext. Prog:
PULSE MODE
Adjustable Slew Rate:
OUTPUT SIGNALS
Current Sample Output:
MISCELLANEOUS
AC Input:
Ambient Temp: 0°C to 40°C
Voltage:
Prog. Accuracy: 1% of setpoint +- 250mv
Resolution(IEEE): .0015% of selected full scale
Accur
Prog.
Resolution(IEEE): .0015% of full scale power
ALOG MODE
0 to 10 Volts input yields 0 to selected full scale Input
Impedance: 330k Ohms
Frequency: 1Hz to 5kHz
Duty Cycle: 0 - 100%
Minimum Pulse Width: 125usec
Max: 0 to full scale in 10µS - adjustable
Scaling: 10 Volts = selected full scale
Accuracy: ±0.5% of selected full scale
±10%, 48 - 62 Hz @ 350W
User Selectable 100VAC,120VAC, 200VAC, 240VAC,
0 to selected full scale current
0 to selected selected full scale
y: 1% of setpoint +-250mw
ac
PROTECTION
Current Limit:
Analog Models: Approximately 105% of selected full scale current
Range(IEEE): 0-105% of selected full scale
Resolution(IEEE): 0.4% of selected full scale
Voltage Limit:
Analog Models: Load disconnect at 105% of selected full scale
voltage
Range(IEEE): 0-105% of selected full scale
Resolution(IEEE): 0.4% of selected full scale
Power Limit:
Range(IEEE): 0 - 6300
Resolution(IEEE): 0.4%
hermal:
T
Undervoltage: Load inhibited at less than1 Volt, when enabled
COMMUNICATION CHANNEL READBACK
Current:
oltage:
V
Accuracy(Range): 0.1% ±5ma
Power:
Communication Modes:
Load disconnect at internal temper
Resolution: .0015% of Selected Full Scale
Accuracy(Range): 0.1% ±5ma
Resolution: .0015% of Selected Full Scale
Resolution: 1 Watt
Accuracy: 0.1% ±5ma
IEEE 488
RS 232
Ethernet (HTTP, TCP, & Telnet)
W
atts
ature of 105°C
INNOVATIVE TEST SYSTEMS... GLOBAL TEST SOLUTIONS
XBL SERIES 6000 WATTS
XBL 100-600-6000
OPERATING RANGES (FULL SCALE range)
Voltage:
Current: 20
P
ower:
Short Circuit: 0.003 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 20A
10V 0-1 A/V 0-10 A/V 0-30 A/V
50V 0-2
100V 0-.1 A/V 0-1 A/V 0-3 A/V
Low Ohms Mode
Range 20A
10V 0-10 A/V 0-100 A/V 0-300 A/V
50V 0-2 A/V 0-20 A/V 0-60 A/V
100V 0-1 A/V 0-10 A/V 0-30 A/V
INPUT CHARA
10 Volts, 50 Volts, 100 Volts
Amps, 200 Amps, 600 Amps
6000
Watts
200A 600A
A/V 0-2 A/V 0-6 A/V
200A 600A
CTERISTICS:
XBL 400-600-6000
OPERATING RANGES (FULL SCALE range)
Voltage:
Current: 20
P
ower:
Short Circuit: 0.010 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 20A
20V 0-.5 A/V 0-5 A/V 0-15 A/V
200V 0-.05
400V 0-.025 A/V 0-.25 A/V 0-.75 A/V
Low Ohms Mode
Range 20A
20V 0-5 A/V 0-50 A/V 0-150 A/V
200V 0-.5 A/V 0-2.5 A/V 0-15 A/V
400V 0-.25A/V 0-2.5 A/V 0-7.5 A/V
INPUT CHARA
20 Volts, 200 Volts, 400 Volts
Amps, 200 Amps, 600 Amps
6000
Watts
200A 600A
A/V 0-5 A/V 0-1.5 A/V
200A 600A
CTERISTICS:
XBL 600-200-6000
OPERATING RANGES (FULL SCALE range)
Voltage:
Current: 2
P
ower:
Short Circuit: 0.014 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 2A
20V 0-.05 A/V 0-.5 A/V 0-5A/V
200V 0-.005
600V 0-.0016A/V 0-.016 A/V 0-.166 A/V
Low Ohms Mode
Range 2A
20V 0-.5 A/V 0-5 A/V 0-50 A/V
200V 0-.05 A/V 0-.5 A/V 0-5 A/V
600V 0-.016 A/V 0-.166 A/V 0-1.666A/V
INPUT CHARA
20 Volts, 200 Volts, 600 Volts
Amps, 20 Amps, 200 Amps
6000
Watts
20A 200A
A/V 0-.05 A/V 0-.5 A/V
20A 200A
CTERISTICS:
.tdipo
www
TDI - DYNALOAD ¥ 36A Newburgh Road, Hackettstown, NJ 07840-3904 • Phone: 908.850.5088 • Fax: 908.850.0679
wer
.com
Loading...