Atec TCP202 User Manual
Easy Current Measurements
Probe Connects Directly
to TDS Scope through
TEKPROBE™ Interface
Split Core Construction
for Easy Circuit Connection
DC to 50 MHz Bandwidth
15 Amps DC + Peak AC Current
50 Amps Peak Pulse Current
1
TCP202 DC Coupled Current Probe
500 x 10–6Amp *Sec Product
UL, CSA, CE Marking
hen combined with a
W
Tektronix TDS oscilloscope, the TCP202
enables users to make
direct readout DC and AC
current measurements,
resulting in accurate displayed and recorded measurements.
The TCP202 is a generalpurpose probe for displaying and measuring current
in electronic circuits. It’s
ideal for power supply and
motor drive design, and for
device testing.
S TA N D A R D
S P E C I F I C AT I O N S
Bandwidth
DC to 50 MHz
Max DC + Peak AC Current
15 A
Max Peak Pulse Current
50 A
Minimum Sensitivity
10 mA/div
DC Accuracy
±1% (with probe calibrator)
±3% (without probe calibrator)
Max Bare Wire Voltage
300 V (Cat I)
T Y P I C A L
C H A R A C T E R I S T I C S
Insertion Impedance
0.002 Ω at 1 kHz
0.1 Ω at 5 MHz
Propagation Delay
17 ns
Max Conductor Diameter
3.8 mm (0.15 inch)
Electrostatic Immunity
(per IEC 801-2)
> 8 kV
Amp *Sec Product
500 x 10–6Amp *Sec
Rise Time
≤ 7.0 ns
P H Y S I C A L
C H A R A C T E R I S T I C S
Weight
0.19 kg (0.44 lb)
Cable Length
2.2 m (7.2 ft)
POWER REQUIREMENTS
TCP202 is powered by the
TDS oscilloscope via the
TEKPROBE™ interface
SAFETY CERT I F I C AT I O N S
UL 3111-1
CSA 1010.1
IEC 1010-1, 1010-2-032
TCP202
DC Coupled
Current Probe
For further information,
contact Tektronix:
2
ASEAN Countries
(65) 356-3900
Australia &
New Zealand
61 (2) 888-7066
Austria
43 (1) 70177-261
Belgium
32 (2) 725-96-10
Brazil and South
America
55 (11) 3741 8360
Canada
1 (800) 661-5625
Denmark
45 (44) 53 54 55
Finland
358 (0) 4783 400
France &
North Africa
33 (1) 69 86 81 81
Germany,
Eastern Europe,
& Middle East
49 (221) 94 77-0
Hong Kong
(852) 2585-6688
India
91 (80) 2265470
Italy
39 (2) 250861
From other areas, contact:
Tektronix, Inc. Export Sales
P.O. Box 500, M/S 50-255
Beaverton, Oregon 97077-0001 USA
(503)627-1916
Visit our Web site:
World Wide Web: http://www.tek.com
Copyright © 1996, Tektronix, Inc.
All rights reserved. Printed in U.S.A. Tektronix
products are covered by U.S. and foreign patents,
issued and pending. Information in this publication
supersedes that in all previously published material.
Specification and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks.
Japan
(Sony/Tektronix
Corporation)
81 (3) 3448-4611
Mexico,
Central America,
& The Caribbean
52 (5) 666-6333
The Netherlands
31235695555
Norway
47 (22)070700
People’s Republic
of China
(86) 10-62351230
Republic of Korea
82 (2) 528-5299
Spain & Portugal
34 (1) 372 6000
Sweden
46 (8) 629 6500
Switzerland
41 (42) 219192
Taiwan
886 (2) 765-6362
United Kingdom
& Eire
44 (1628) 403300
USA
1-800-426-2200
TCP202 – IGBT current and voltage waveforms
TCP202 DC COUPLED
CURRENT PROBE
Includes: Instruction manual
(070-9542-00), reference manual
(070-9543-00)
R E C O M M E N D E D
A C C E S S O R I E S
Probe Calibrator (015-0672-50)
Use with TDS 520B, TDS 5 4 0 B ,
T D S 724A, TDS 744A, and
T D S 784A for improved accuracy
TDS 7U01 Upgrade Kit
For TDS 744A and TDS 784A
ORDERING INFORMAT I O N
RECOMMENDED
O S C I L L O S C O P E S
TDS 520B
TDS 540B
TDS 724A
TDS 744A (S/N B040100 or higher)
TDS 784A (S/N B040100 or higher)
TDS 744A and TDS 784A with
S/N B030XXX or lower can be
upgraded to the latest version
using the TDS 7U01 Upgrade Kit
The TCP202 operates with all
other TDS 400, TDS 500,
TDS 600, and TDS 700 series
oscilloscopes; the scale factor
will be correct, but measurement
will be indicated as V instead of A
Please check with your local
Tektronix Service Center
R E L ATED PRODUCTS
1103
TEKPROBE Power Supply
(for use with non-TEKPROBE
BNC scopes)
ADA400A
Differential Preamplifier
P5205
High Voltage Differential Probe
6/96 TD/XBS 51W–10736–2
Loading...