Atec TC10RC User Manual
When you think of value, think of the Tenney
TC SERIES
Benefits:
• Robust design delivers consistent, reliable,
repeatable results that lead to higher productivity
• Programmable controller - Watlow F4 - is very
intuitive - easy to set up and user-friendly
• Constructed for long life and thermal integrity
Standard Features
• Watlow F4 controller
• Solid state humidity sensor
• Platinum RTD temperature sensor
• Heavy duty leveling casters
• Nichrome wire air heater
• Solid state pressure switches
• Backup safety thermal cutoff
• Chamber vent port
• Communications - RS485 and RS232
-73° C
200° C
All new energy saving design
Workspace size: 10 cubic feet
Global support network
20% - 95% RH
Options
• Shelves
• FM approved safety OTP
• Ethernet port
• Heated viewing glass window
• Chamber light
• UL 508A compliant
• Main electrical disconnect
One year
parts and labor
warranty
Shown with Optional Window and
Main Electrical Disconnect
www.tenney.com/tc
Controller Features
• Single or Dual Channel
• Proling: 40 Proles, 256
Steps
• Automatic & Manual
Control
1 Input: Universal Type
(RTD is Std.)
• 4 Digital Inputs
• 2 Control Outputs: Time
Proportioned, On/Off, or
4-20 ma
• 2 Alarm Outputs
• 8 Digital Event Outputs
• 2 Retransmit Outputs Optional
• Communications: EIA232 and EIA-485 with
Modbus RTU protocol
TC SERIES
All technical data specied for units with standard equipment. All gures are typical average values for TC Series devices. SPX Thermal Product Solutions reserves the right to alter
technical specications at any time. Data may vary depending on ambient conditions, product load, or other changes causing interference to chamber airow.
Specications and Product Information is subject to change without notice. Images for reference only. Some options and accessories may not be included with all congured models.
*Humidity Range: based on temperature range 20°C to 85°C limited by 3°C dewpoint
Performance estimates based on 230v 1P 60Hz
www.tenney.com/tc
Loading...