Atec S331E, S332E, S361E, S362E User Manual

Manufacturers > Anritsu Categories > Wireless, Antenna, Base Station Test > Cable & Antenna Analyzers, Site Masters, Sweepers

Anritsu S332E Site Master Product Page

Technical Data Sheet

Anritsu S331E Site Master Product Page Anritsu S362E Site Master Product Page

™

Site Master

How-To Video:

Compact Handheld Cable & Antenna Analyzer with Spectrum Analyzer

S331E S332E S361E S362E

2 MHz to 4 GHz 2 MHz to 4 GHz 2 MHz to 6 GHz 2 MHz to 6 GHz Cable & Antenna Analyzer

100 kHz to 4 GHz 100 kHz to 6 GHz Spectrum Analyzer

Introduction

Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995.

Cable and Antenna Analyzer Highlights

Measurements: RL, VSWR, Cable Loss, DTF, Phase• 2-port Transmission Measurement: High/Low Power• Sweep Speed: 1 msec/data point, typical• Display: Single or Dual Measurement Touchscreen• Calibration: OSL, InstaCal• Bias Tee: 32 V internal•

™

, and FlexCal

™

Spectrum and Interference Analyzer Highlights

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I• Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID,•

Interference Mapping Dynamic Range: > 95 dB in 10 Hz RBW• DANL: -152 dBm in 10 Hz RBW• Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz• Frequency Accuracy: < ± 50 ppb with GPS On•

Capabilities and Functional Highlights

4 hour battery operation time• Store 2000 Traces internally• Touchscreen keyboard• Quick Name Matrix• PIM Analyzer• AM / FM / PM Analyzer• High Accuracy Power Meter•

4, 6, 8, 18, 26 GHz USB Sensors• On-Screen Interference Mapping• On-Screen Coverage Mapping• GPS tagging of saved traces• USB & Optional Ethernet•

(Option 0411) for data transfer and instrument control

Increase throughput by• automating repetitive or operator intensive tasks via Ethernet or USB. Remote programming provided via Ethernet (Option

0411) < 5 minute warm-up time•

E-Learning Training• Certified Line Sweep Training• Line Sweep Tools•

Site Master™ S331E Cable & Antenna Analyzer featuring 8.4” Daylight Viewable Touchscreen

Compact Size: 273 mm x 199 mm x 91 mm (10.7 in x 7.8 in x 3.6 in), Lightweight: 2.71 kg (6.0 lbs)

Site Master™ S331E, S332E, S361E, S362E Specifications

Cable and Antenna Analyzer

Measurements

Measurements VSWR

Return Loss Cable Loss

Distance-to-Fault (DTF) Return Loss Distance-to-Fault (DTF) VSWR

1-Port Phase Smith Chart

Setup Parameters

Measurement Display Single/Dual Measurement Display with independent markers

Frequency Start/Stop, Signal Standard, Start Cal

DTF Start/Stop, DTF Aid, Units (m/ft), Cable Loss, Propagation Velocity, Cable, Windowing

Windowing Rectangular, Normal Side Lobe, Low Side Lobe, Minimum Side Lobe

Amplitude Top, Bottom, Auto Scale, Full Scale

Sweep Run/Hold, Single/Continuous, RF Immunity (High/Low), Data Points, Aver a ging/Smoothing,

Data Points 137, 275, 551, 1102, 2204

Markers Markers 1-6 (On/Off), Delta Makers 1-6 (On/Off), Marker to Peak/Valley, Marker Table

Traces Recall, Copy to Display Memory, No Trace Math, Trace ± Memory, Trace Overlay

Limit Line On/Off, Single Limit, Multi-segment (41), Limit Alarm, Clear

Calibration Start Cal, Cal Type (Standard/FlexCal™)

Save/Recall Setups, Measurements (.vna, .dat), Screen Shots Jpeg (save only)

Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

Frequency

Frequency Range 2 MHz to 4 GHz (S331E, S332E), 2 MHz to 6 GHz (S361E, S362E)

Frequency Accuracy ≤ ± 2.5 ppm @ 25 °C

Frequency Resolution 1 kHz, (RF immunity low)

Output Power

High 0 dBm, typical

Low –30 dBm, typical

Interference Immunity

On-Channel +17 dBm @ > 1.0 MHz from carrier frequency

On-Frequency 0 dBm within ± 10 kHz of the carrier frequency

Measurement Speed

Return Loss ≤ 1.00 msec/data point, RF immunity low, typical

Distance-to-Fault ≤ 1.25 msec/data point, RF immunity low, typical

Return Loss

Measurement Range 0 to 60 dB

Resolution 0.01 dB

VSWR

Measurement Range 1 to 65

Resolution 0.01

Cable Loss

Measurement Range 0 to 30 dB

Resolution 0.01 dB

Distance-to-Fault

Vertical Range Return Loss 0 to 60 dB

Vertical Range VSWR 1 to 65

Fault Resolution (meters) (1.5 x 10

Horizontal Range (meters) 0 to (Data Points-1) x Fault Resolution, to a maximum of 1500 meters (4921 ft)

1-Port Phase

Measurement Range –180° to +180°

Resolution 0.01°

Smith Chart

Resolution 0.01

Output Power (High/Low)

100 kHz, (RF immunity high)

x vp)/∆F (vp = velocity propagation constant, ∆F is F2-F1 in Hz)

Page 2 of 16

Site Master™ S331E, S332E, S361E, S362E Specifications

Cable and Antenna Analyzer (continued)

Measurement Accuracy

Corrected Directivity > 42 dB, OSL Calibration

Measurement Uncertainty

Optical Distance-to-Fault Module (P/N ODTF-1)

Wavelength 1550 nm, typical

Event Resolution 10.2 cm (0.335 ft) maximum, or 150 / (n*ΔF), ΔF in MHz, n is IOR

Horizontal Range 1020 meter (3345 ft) maximum, or (#dp-1) *Event Resolution

Optical Dynamic Range 30 dB

Optical Output Power 3 dBm, typical

RF Connector N(m)

Optical Connector FC/APC

> 38 dB, InstaCal™ Calibration

Fiber Type Single Mode Fiber

Datasheet 11410-00478 (for complete specications)

PIM Analyzer (Option 0419) (Requires PIM Master™)

2-Port Transmission Measurement (Option 0021)

Frequency

Frequency Range 2 MHz to 4 GHz (S331E, S332E), 2 MHz to 6 GHz (S361E, S362E)

Frequency Resolution 10 Hz

Output Power

Dynamic Range

Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

Bias-Tee (Option 0010)

Current (Low/High) 250 mA/450 mA, 1 A surge for 100 ms

See Product Brochure 11410-00546

High 0 dBm, typical

Low –30 dBm, typical

2 MHz to 4 GHz 80 dB 4 GHz to 6 GHz 70 dB

Setup On/Off, Voltage, Current (Low/High)

Voltage Range +12 V to +32 V

Resolution 0.1 V

Page 3 of 16

Site Master™ S331E, S332E, S361E, S362E Specifications

Spectrum Analyzer (S332E, S362E)

Measurements

Smart Measurements Field Strength (uses antenna calibration tables to measure dBm/m

Occupied Bandwidth (measures 99% to 1% power channel of a signal)

Channel Power (measures the total power in a specied bandwidth)

ACPR (adjacent channel power ratio) AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only) C/I (carrier-to-interference ratio) Emission Mask Coverage Mapping (requires Option 0431)

Setup Parameters

Frequency Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment

Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection

Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span

Bandwidth RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW

File Save, Recall, Delete, Directory Management

Save/Recall Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event

Save-on-Event Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All

Delete Selected File, All Measurements, All Mode Files, All Content

Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB

Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

Sweep Functions

Sweep Single/Continuous, Sweep Mode (Fast, Performance, No FFT), Reset, Detection,

Minimum Sweep Time, Trigger Type, Gated Sweep (see Option 0090)

Detection Peak, RMS, Negative, Sample, Quasi-peak

Triggers Free Run, External, Video, Change Position, Manual

Trace Functions

Traces Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations Trace A Operations Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace) Trace B Operations Trace C Operations

Marker Functions

Markers Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,

Marker Types Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker

Marker Auto-Position Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,

Marker Table 1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset

Limit Line Functions

Limit Lines Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit

Limit Line Edit Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right

Limit Line Move To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1

Limit Line Envelope Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope

Limit Line Advanced Type (Absolute/Relative), Mirror, Save/Recall

Frequency

Frequency Range 100 kHz to 4 GHz (S332E), 100 kHz to 6 GHz (S362E) (usable to 0 Hz)

Tuning Resolution 1 Hz

Frequency Reference Aging: ± 1.0 ppm/year

Frequency Span 10 Hz to 4 GHz including zero span (S332E), 10 Hz to 6 GHz including zero span (S362E)

Sweep Time Minimum 100 ms, 10 µs to 600 seconds in zero span

Sweep Time Accuracy ± 2% in zero span

Bandwidth

Resolution Bandwidth (RBW) 10 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth)

Video Bandwidth (VBW) 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable) RBW with Quasi-Peak Detection 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth) VBW with Quasi-Peak Detection Auto VBW is On, RBW/VBW = 1

A B, B  C, Max Hold, Min Hold A  C, B  C, Max Hold, Min Hold, A - B  C, B - A  C, Relative Reference (dB), Scale

Marker Table (On/Off), All Markers Off

Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level

Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On

or dBmV/m)

Page 4 of 16

Site Master™ S331E, S332E, S361E, S362E Specifications

Spectrum Analyzer (S332E, S362E) (continued)

Spectral Purity

SSB Phase Noise @ 1 GHz –100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset

–105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset –115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset

Amplitude Ranges

Dynamic Range > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW

Measurement Range DANL to +26 dBm

Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed

Reference Level Range –120 dBm to +30 dBm

Attenuator Range 0 to 55 dB, 5.0 dB steps

Maximum Continuous Input +35 dBm

Amplitude Units Log Scale Modes: dBm, dBV, dBmv, dBμV

Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW

Amplitude Accuracy

100 kHz to 4.0 GHz ± 1.25 dB, ± 0.5 dB typical > 4.0 GHz to 6 GHz ± 1.50 dB, ± 0.5 dB typical

Displayed Average Noise Level (DANL)

Preamp Off

(Reference level -20 dBm)

(RBW Normalized to 1 Hz, 0 dB attenuation) Maximum Typical Maximum Typical

10 MHz to 2.4 GHz –141 dBm –146 dBm –157 dBm –162 dBm

> 2.4 GHz to 4 GHz –137 dBm –141 dBm –154 dBm –159 dBm

>4 GHz to 5 GHz –134 dBm –138 dBm –150 dBm –155 dBm

> 5 GHz to 6 GHz –126 dBm –131 dBm –143 dBm –150 dBm

(RBW = 10 Hz, 0 dB attenuation)

10 MHz to 2.4 GHz –131 dBm –136 dBm –147 dBm –152 dBm

> 2.4 GHz to 4 GHz –127 dBm –131 dBm –144 dBm –149 dBm

> 4 GHz to 5 GHz –124 dBm –128 dBm –140 dBm –145 dBm > 5 GHz to 6 GHz –116 dBm –121 dBm –133 dBm –140 dBm

Spurs

Residual Spurious < –90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)

Input-Related Spurious < –75 dBc (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz)

Exceptions, typical < –70 dBc @ < 2.5 GHz, with 2072.5 MHz Input

< –68 dBc @ F1-280 MHz with F1 Input < –70 dBc @ F1 + 190.5 MHz with F1 Input < –52 dBc @ 7349 - 2F2 MHz, with F2 Input, where F2 < 2424.5 MHz < –55 dBc @ 190.5 ± F1/2 MHz, F1 < 1 GHz

Third-Order Intercept (TOI)

Preamp Off (–20 dBm tones 100 kHz apart, 10 dB attenuation)

800 MHz +16 dBm

2400 MHz +20 dBm

200-2200 MHz +25 dBm, typical

> 2.2 GHz to 5.0 GHz +28 dBm, typical > 5.0 GHz to 6.0 GHz +33 dBm, typical

Second Harmonic Distortion

Preamp Off, 0 dB input attenuation, –30 dBm input

50 MHz –56 dBc

> 50 MHz to 200 MHz –60 dBc, typical

> 200 MHz to 3000 MHz –70 dBc, typical

VSWR

2:1, typical

Preamp On

(Reference level -50 dBm)

Page 5 of 16

+ 11 hidden pages