Atec S1P User Manual

PIM S1P - Portable PIM Analyzer

 Multiple Test Modes: Field Diagnostic, Analyzer with Multi PIM, PIM over

Time, Rx Sweep, Single Carrier Mode for System Return Loss measurements,

Distance to PIM, VSWR, Distance to Fault.

 Embedded DTP. No need to re-connect DUT when switching between PIM

and DTP measurements.

 Variable output power 15 dBm to 44 dBm. Ideal for Macro BTS and DAS.

 Very high PIM sensitivity: -172 dBc @ 2x 43 dBm carriers.

 PIM vs. Time graph, Min & Maxhold feature. Perfect for static & dynamic PIM

measurements.

AWT portable PIM S1P analyzers are powerful tools for analyzing telecommunication infrastructure.

These PIM testers provide constant CW Power and with that, are in full conformance to PIM standard

IEC 62037. The ruggedized analyzers are built to work under tough conditions and will perform reli-

ably. PIM S1P testers offer variable output power from 15 dBm to 44 dBm The market leading dynamic

range and low receiver noise level makes them ideal for pinpointing and eliminating PIM at macro BTS

sites and in-building DAS installations. Measurement results can be stored as PDF document, BMP

screen shots, PDF protocol with embedded screen shot or as alphanumerical CSV les. Distance-to-

PIM (DTP) measurements are accurate due to a patented technology. DTP is performed conveniently

with the push of a button, no need to install external hardware and to re-connect the DUT.

Models

Model Description Tx Range (MHz) Rx Range (MHz)

PP700L LTE700 (low) 728 ~ 759 698 ~ 716

PP700U LTE700 (high) 730 ~ 759 776 ~ 788

PP800 LTE800 791 ~ 821 832~ 862

PP850 AMPS/CDMA 869 ~ 896 824 ~ 851

PP900 GSM900 935 ~ 960 890 ~ 915

PP900E E-GSM & GSM900 925 ~ 960 880 ~ 915

PP1800 DCS 1800 /GSM1800 1805 ~ 1880 1710 ~ 1785

PP1900 PCS1900 1930 ~ 1990 1850 ~ 1910

PP2000TD TD-SCDMA(2000) 2010 ~ 2025 1900 ~ 1920

PP2100UMTS UMTS/W-CDMA 2110 ~ 2170 1920 ~ 1980 / 2060

PP2100AWS AWS 2110 ~ 2155 1710 ~ 1755

PP1921PA PCS & AWS 1930 ~ 1990 / 2110 ~ 2155 1710 ~ 1755

PP2160JP W-CDMA-JP 2150 ~ 2170 2110 ~ 2140

PPWBKR WiBro-KR 2110 ~ 2170 / 2300 ~ 2390 1910 ~ 1990

PP2600LTE IMT-E(2600), LTE2600 2620 ~ 2690 2500 ~ 2570

RF & Microwave

Technology

AWT-Global provides ad-

vanced telecommunication

technology products and

analyzers for a variety of RF

and Microwave applications.

Portable PIM Test Systems

Field use demands rugge-

dized yet accurate test in-

struments. Our portable PIM

testers are designed exactly

for these conditions. The

wide Tx power range from

15dBm to 44dBm makes the

PIM S1P analyzer ideal for

Macro BTS sites and DAS

installations. DTF (opt) can

be measured with the push

of a button.

PIM Analyzers for

Production

Production analyzers have

to perform permanently.

AWT - Global offers single

and dual band PIM analyz-

ers that are build for 24/7

operation. Also available are

expandable systems for up

to four frequency bands.

Technical Specications

System

Measurement Method Reverse (reected) PIM,

3rd, 5th, 7th, 9th, 11th
and 13th order

Residual PIM < -129 dBm / -172 dBc

User Interface Ports 3x USB 1x LAN, 1x RF
Output (7-16 DIN female)

Display 10.2 inch, touch screen

Transmitter

Frequencies See table

Frequency increments 100 kHz

Frequency accuracy 2 ppm

Power (per tone) 15 - 44 dBm adjustable
(46 dBm opt)

Power Accuracy +/- 0.35 dB

Reverse Pwr. Protection +43 dBm for 5 sec

Receiver

Measurement Range -45 dBm to - 132 dBm

-88 dBc to -175 dBc

Noise Floor <-138 dBm

Dynamic Range (typical) 96 dB (ref: -90 dBm)

Max Input Power -10 dBm

Measurement Accuracy +/- 2dB @ 2 x 43 dBm

Distance to PIM / Distance to VSWR (Opt)

DTP / DTF resolution 0.1 m

DTP Accuracy 0.5 m (typ.)

DTF Accuracy 0.5 m (typ.)

Cable Types Pre stored types & user
can add new cable types

Electrical

Main Power 100-240V, 50/60Hz

Power consumption 640 Watts (VA)

Dimensions / Weight

Dimensions 457 x 305 x 500 (mm)

18.0 x 12.0 x 19.7 (inch)

Weight (freq > 1 GHz) 23 kg (24 kg)

PPOPT1 1kg

Environmental

Operating Temperature -10° C to +50° C

Storage Temperature -20° C to +60° V

Ingress Protection IP66 (lid closed)
IP20 (lid open)

Relative humidity 5% to 90%
(non condensing)

Mechanical shock rating 40G

Product Quality

AWT is committed to

providing our customers

with products meeting the

highest quality standards.

All AWT products undergo

thorough quality checks and

are ISO 9001 and ISO 14001

certied.

For more information on any

of our products or services

please visit our Web site:

www.awt-global.com

Options & Accessories

Type Description

PPOPT1 Embedded option for distance-to-PIM (DTP), Return Loss, VSWR and

distance-to-fault

PPOPT5 Increases output power. Adjustable range from 20dBm to 46dBm

PACC2 Accessory Kit: low PIM cable 3m DIN(m)-DIN(m), low PIM cable 1m

DIN(m)-DIN(m), low PIM Load 50W / 20W, dual port DIN(m)-DIN(f), PIM

<-168dBc, torque wrench DIN7/16, (4) adaptors, cleaning tabs, carrying

case IP66

PIMGEN PIM generator, preset PIM value 95 dBm (+/-5) for quick system tests

PLOAD100 Low PIM load 100W, PIM < -168 dBc, 700-2700 MHz, with handle

PLOAD50 Low PIM load 50W / 20W (30 mins / permanent), PIM < -168 dBc, 700 -

2700 MHz, dual port DIN(m)-DIN(f), with ear for carabiner or strap

PCAB3M Low PIM cable 3m, PIM < -168dBc, DIN(m)-DIN(m)

TRQWRN25 Torque Wrench 7/16 DIN - 25Nm / 19 ft lb

Specications subject to change without further notication

Sales Ofces

AWT-Global New Jersey

Sales Ofces

117 Grand Avenue

AWT-Global New Jersey

Hackettstown,

2001 Rt 46 Waterview Plaza,

New Jersey 07840

STE #310 / 71

USA

Parsippany, New Jersey

07054, USA

p: [phone]

e: [e-mail]

p: [phone]

f: [phone]

AWT-Global Nevada

e: [e-mail]

11309 Asilo Bianco Avenue

Las Vegas

AWT-Global Nevada

Nevada 89138, USA

11309 Asilo Bianco Avenue

Las Vegas, Nevada

p: [phone]

89138, USA

e: [e-mail]

p: [phone]

f: [phone]