TriMode™ Solder Tips
Small Form Factor for High-density Probing
BandwidthChoicesfrom4to25GHz
1.5 m Extens
Quickly and Reliably Connect to Multiple Probe Tips
Precision Differential Probing Module – Optional Handheld and
Fixtured Probing
Small Precision Tapered Tips, an Articulated Joint for Compliance,
and Variable Tip Spacing
TekConnect®Interface – TekConnect Scope/Probe Control and
Usability
Direct Control from Probe Compensation Box or from Scope Menu
Automated Measurement Control through the TekConnect®Interface
to Connect
View TriMode/Attentuation Settings on Probe Compensation Box from
Top or End Panel
ion Cable for High-temperature Probing
to Tektronix Real-time Oscilloscopes
Applications
Examples Include, but are Not Limited To:
PCI Express 3.0, Serial ATA III, DDR2/3/4, QPI, XAUI
Datasheet
Before TriMode: 1 Probe for Differential; 2 Probes for SE and Common Mode; or 1 Probe
Soldered and Resoldered 3 times; 2 Probes for Common Mode.
TriMode™ Probing, Connectivity, and
Performance
TriMode™ Probing Architecture
One-probe setup makes differential, single ended, and common mode
measurements accurately and definitively.
Tektronix is a kno wn leader when it comes to signal fidelity and signal
acquisition. Building on our history of market-leading innovations in probing,
After TriMode (P75TLRST): 1 Probe for Differential, Single Ended, and Common Mode,
with only 1 setup required.
we invented a revolutionary probing architecture called “TriMode™ Probing”
nes the next-generation industry benchmark for usability and signal
that defifidelity. This architecture changes the rules of probing and allows you to
work more effectively and efficiently. By enabling unique functionality, the
P7500 Series TriMode probes allow you to switch between differential,
single ended, and common mode measurements without moving the probe
from its connection points.
Improved productivity is achieved by reducing setup time. One setup can be
used to make the three different types of measurements all with the press
ton. The TriMode Probe architecture for the P7500 Series probes
of a but
continues the Tektronix tradition of high-bandwidth an d low-DUT loading
while providing improved connectivity and value.
2 www.tektronix.com
TriMode™ Probe Family — P7500 Series
Connectivity Plus – Solder Down – Handheld
–Fixtured
The P7500 Series TriMode probe architecture offers various levels of
connectivity and provides the highest probe fidelity available for real-time
oscilloscopes. T he multipoint connectivity solutions o f the P7500 Series
include:
TriMode Perfo
Up to 25 GHz bandwidth.
rmance Solder Tip The highest-performance solder tip.
TriMode Resistor Solder Tip High-performance solder tip with
easy-to-solder tip resistors. Up to 18 GHz bandwidth.
TriMode Extended-resistor Solder Tip Medium-performance solder tip
with long easy-to-solder tip resistors. Up to 7 GHz bandwidth.
TriMode Long-reach Solder Tip A high performance solder tip with
ach and very small, low-profile form factor. Up to 20 GHz
alongre
bandwidth.
www.tektronix.com3
Datasheet
TriMode Micro-coax Tip Low-cost, quick-connect solder tips. Up to
4 GHz bandwidth.
TriMode High-temperature Tip When used with the 1.5 m Socket Cable
XL, this tip can be used in environments from –55 °C to 150 °C. Up to
10 GHz bandwidth with DSP.
Damped Wire Tip Low-cost solder tips ideal for high-density probing. Up
to 8 GHz bandwidth.
Precision Differential Probing Module High-performance handheld
probing module. Up to 18 GHz bandwidth.
Handheld and fixtured probing needs are met using the optional PrecisionDifferential Probing Module (P75PDPM). Its small precision tapered tips,
variable articulation of the probe tip, and quick-adjusting variable tip spacing
des the needed flexibility for adapting to vias and other test points of
provi
differing sizes from 30 mils to 18 0 mils.
e precision connectivity tools enable you to access multiple signals on
Thes
anything from convenient test pads to hard -to-reach, high-density circuitry.
4 www.tektronix.com
Signal Fidelity
You can be confident in the signal fidelity of your measurements. The
innovative new Tektronix differential architecture, coupled with the superior
electrical performance of IBM SiGe Technology, provides the bandwidth and
fidelity to meet
the industry needs of today as well as tomorrow.
The P7500 Series Probe Architecture provides:
Highest bandwidth available – 25 GHz
Excellent step response
Low-DUT loading
High CMRR
Differential, single ended, or common mode measurements using one
probe
Performance You Can Count On
Depend on Te
addition to industry-leading service and support, this product comes backed
by a one-year warranty as standard.
ktronix to provide you with performance you can count on. In
The typical sys
probe with a DPO/DSA72504D or DPO/DSA73304D Oscilloscope and a P75PST
solder tip.
tem specifications in the table below are achieved using a P7520A
Characterist
System Bandwidth25 GHz>18 GHz
System Rise Time (10% – 90%)
System Rise Time (20% – 80%)
ic
A-B ModeAll Other Mode
<20 ps<29 ps
<14 ps<20 ps
s
Minimum System Requirements / Instrument Compatibility
P7500 Series TriMode Differential Probes are compatible with the DPO/DSA/MSO70000 and TDS6000B/C Series TekConnect Oscilloscopes. The chart belowshows
recommended probe/oscilloscope model combinations.
TriMode™ Differential Probe, 20 GHz, for TekConnect Interface Oscilloscopes.
P7516
TriMode™ Differential Probe, 16 GHz, for TekConnect Interface Oscilloscopes.
P7513A
TriMode™ Differential Probe, 13 GHz, for TekConnect Interface Oscilloscopes.
P7508
TriMode™ Differential Probe, 8 GHz, for TekConnect Interface Oscilloscopes.
P7506
TriMode™ Differential Probe, 6 GHz, for TekConnect Interface Oscilloscopes.
P7504
TriMode™ Differential Probe, 4 GHz, for TekConnect Interface Oscilloscopes.
All Include: One-year warranty, plus see Standard Accessories table.
Service Options
Option
CA1Single Calibration or Functional Verification
C3Calibration Service 3 Years
C5Calibration Service 5 Years
D3
D5
G3Complete Care 3 Years (includes loaner, scheduled calibration and
G5Complete Care 5 Years (includes loaner, scheduled calibration and
R3
R5
Add
R3PDW
R5PDW
FW VersionRecommended Probe
V6.4.1 or higherP7520A
V6.4.1 or higherP7520A
V3.0 or higherP7520A
V3.0 or higherP7516
V3.0 or higherP7513A
V3.0 or higherP7508
V3.0 or higherP7506
V3.0 or higherP7504
V5.1.7P7516, P7513A
V5.1.3P7508, P7506
V2.3
V2.3
Descripton
Calibration Data Report 3 Years (with Option C3)
Calibration Data Report 5 Years (with Option C5)
more)
more)
Repair Service 3 Years
Repair Service 5 Years
All P7500 Series probes
All P7500 Series probes
itional Service Products Available During Warranty (DW)
Repair service coverage 3 years (includes product warranty period).
3-year period starts at time of customer instrument purchase
Repair service coverage 5 years (includes product warranty period).
5-year period starts at time of customer instrument purchase
6 www.tektronix.com
Standard Accessories
Description
The documentation kit contains:
Printed Quick Start User Manuals,
CD-ROM contains PDFs of basic probe
and measurement literature, and the probe
manuals (Quick Start User Manual and
Technical Reference Manu al)
Antistatic Wrist Strap
Certificate of Traceable Calibration
Data Calibration Report: Lists the
manufacturing test results of your probe at
the time of shipment and is included with
every probe
DC Probe Calibration Fixture
DC Probe Calibration Fixture
50 Ω Coax Cable – Male BNC to Male BNC
50 Ω CoaxCable–MaleSMAtoMaleSMA
Solder Tip Ramps (25 each)1 each (P7520A only)
P7520A/P7516/P7513A/P7508 Accessory Box (See contents listing below 1 through 7)
1) TriMode Long-reach Solder Tip
2) G3PO Bullet Kit (includes 4 bullets)
3) G3PO Bullet Removal Tool
4) Solder Kit: Solder Spool, Wire Spool
5) Tape, Adhesive (Strip, 10 each)
6) Marker Band Set (2 each of 5 colors)
7) Socket Cable
P7506/P7504 Accessory Box (See contents listing below 1 through 6)
1) Socket Cable
2) TriMode Micro-coax Tip
3) TriMode High-temperature Tip
4) Solder Kit: Solder Spool, Wire Spool
5) Tape, Adhesive (Strip, 10 each)
6) Marker Band Set (2 each of 5 colors)
*1
P7520A documentation is a printed instruction manual.
* European toll-free number. If not accessible, call: +41 52 675 3777
rope and the Baltics +41526753777
Central Europe & Greece +41 52 675 3777
Asia, and North Africa +41 52 675 3777
The Netherlands 00800 2255 4835*
People’s Rep
Republic of
United K ingdom & Ireland 00800 2255 4835*
sia (65) 6356 3900
Austria 00800 2255 4835*
Belgium 00800 22
Brazil +55(11)37597627
Canada 1 800 833 9200
Denmark +4580881401
Finland +41526
France 00800 2255 4835*
Germany 00800 2255 4835*
Hong Kong 400 8
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 67
Luxembourg +41526753777
ublic of China 400 820 5835
Poland +41 52 675 3777
Korea 001 800 8255 2835
Russia & CIS +7 (495) 7484900
South Africa +41526753777
Spain 00800
Sweden 00800 2255 4835*
Switzerland 00800 2255 4835*
Tai wa n 886 (
55 4835*
75 3777
20 5835
14 3010
Norway 800 16098
Portugal 80 08 12370
2255 4835*
2) 2722 9622
USA 1 800 833 9200
Updated 10 February 2011
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix
Standard Codes and Formats.
www.tektronix.com
For Further Information. Tektronix maintains a comprehensive, constantly expanding
collection of application notes, technical briefs and other resources to help engineers working
on the c utting edge of technology. P lease visit www.tektronix.com