Atec P7260 User Manual

Active Probe

P7260 Data Sheet

Features & Beneﬁts

6 GHz Bandwidth

Switchable Attenuation Provides up to 6 V

Low Input Capacitance <0.5 pF

Provides 6 GHz System Bandwidth at Probe Tip with T DS6604 TekConnect™ Oscilloscope

Connect and Adapt to Various Circuit Designs with Small Probe Head and Numerous Connection Accessories

TekConnect Interface

Dynamic Range

p-p

Applications

High-speed D igital Systems Design

Component Design/Characterization

Manufacturing Engineering and Test

Data Sheet

P7260 Single-ended Active Probe

The P7260 is the fastest active probe in the world. It provides high bandwidth, low circuit loading, low noise, and accurate probing solutions for high-speed circuit designers. This probe has a small probe head for accessing conn

ection points in tight physical constraints and with today’s

ﬁne pitch circuitry.

The P7260 is th

eworld’sﬁrst probe to be developed with silicon germanium (SiGe).It features a toggle/switch that offers the choice of using the probe at either 1.5 V

p-p

or 6 V

dynamic ra nge.

p-p

TekConnect interface takes probe intelligence to the next level, providing probe power, automa ted signaling of scale factor and offset voltage. It also adds automatic bandwidth adjustment and voltage measurement. The TekConnect interface extends useful bandwidth and signal ﬁdelity out to 18 GHz. A full complement of versa tile probe tip accessories helps connect to the wide ra

Characteris

Designed for use with the TDS6604 oscilloscope - the system bandwidth is typically 6GHz.

Characteristic Speciﬁcation 5 x Speciﬁcation 25x

Type Bandwidth

(probe only, typical) Rise Time ( Input Cap Attenuation Dynamic Range DC Offset Input Resistance Maximum Nondestruct

Voltage Compatible

Oscilloscopes*

*1Requires ﬁrmware version 2.1 or higher for TDS/CSA7000 Series.

nge of devices faced by digital designers.

tics

TekConnect Active, Single-ended

6GHz 6GHz

guaranteed)

acitance (pF)

Range

<75 ps

<0.5 pF <0.5 pF

±0.75 V (1

TDS6604, TDS7404, all TekConnect oscilloscopes

.5 V

p-p

±5 V ±5 V

20 kΩ at DC 20 kΩ at DC

30 V (DC p

)

lus peak AC)

<85 ps

25x

±3.0 V (6.

)

p-p

Ordering Information

P7260

6.0 GHz Active Probe, TekConnect interface.

Includes: Pro Warranty: One year.

Service

Opt. C3 – Calibration Service 3 Years Opt. C5 – Calibration Service 5 Years Opt. D1 – Calibration Data Report Opt. D3 – Calibration Data Report 3 Years (with Opt. C3) Opt. D5 – Calibration Data Report 5 Years (with Opt. C5) Opt. R3 – Repair Service 3 Years Opt. R5 – Repair Service 5 Years

P7260 Included Accessories

Description

Instruction Manual 1 each 071-0922-xx Probe Car Y Lead Adapter 2 each 196-3434-xx 3 in. Grou SMT Klip SureToe

Accessory Reorder Sheet Short Ground Pogo Pin

(set of 8) Squar

(set (ada squa

Color-coding Bands, 5 colors

"L" Adapter (set of 2) Antistatic Wrist Strap Customizable Grounded

Lead (set of 5)

Recommended Accessories

escription

TekConnect Calibration Adapter/Fixture/SW

Probe Arm 1 each PPM100 High-speed Deskew

Fixture Probe Calibration Fixture

IC Grabber (set of 2)

be tip accessories (see list), user manual, storage case.

Quantity Part Number/Status

ry Case

nd Lead

Chip™ Adapter

™

ePinAdapter of 4) pt to .100 in. centered

re pins)

1 each 016-1879-xx

2 each 196-3437-10 2 each 206-0364-xx

1set

1 each 001-1349

1 set 016-1917-xx

1 set 016-1910-xx

1 set 016-1886-xx

1 set 016-1913-xx

1 each 006-3415-xx

1 set 196-3482-xx

Quantity Part Number/Status

each

1 each 067-0484-xx

1 each 067-1456-xx

1 set 013-0309-xx

(Replac

ST501

ement Pkg of 12)

67-0422-xx

2 www.tektronix.com