Atec OC60D, OC60A, OC60TCDE, OC60TCVDE User Manual

LANTEK

®

6 LAN Cable Certifier

■ Fully compliant with

Category 6/I S O E draft
standards

■ Full Category 6/I S O E

AutoTest, with graphs in
approximately 25 seconds

■ Tests CAT 7/I S O F limits up

to 350 M Hz

■ Advanced link adapter

method provides more
versatility and reduces cost
of ownership

■ Built in TDR ready for

copper and fiber

■ First fiber accessory for a

copper tester that traces
fiber runs, displays distance
to and magnitude of events

LANTEK 6 is a fully compliant Category 6/
ISO E cable tester with a frequency range up
to 350 MHz. Performing full Category 6/ISO E
Autotests with graphs in approximately 25
seconds, LANTEK 6 will get you through
your jobs faster than ever. Plus LANTEK 6 is
fully upgradeable to LANTEK 7 giving you
maximum flexibility as test standards evolve.

LANTEK 6 utilizes an advanced link adapter
method to reduce cost of ownership.
LANTEK 6 comes with a pair of Category 6/
ISO E channel adapters. These channel
adapters fit into the case of the unit and are
locked in place. This creates a stable and
repeatable testing platform while eliminating
bulky adapters extending beyond the end of
the unit. By simply plugging in a Category 6/
ISO E reference patch cord to the channel
adapter, you can now perform Category 6/
ISO E permanent link testing. Should the
plug ever wear out the patch cord is
replaced rather than the entire assembly
reducing lifetime cost of ownership.

Among the LANTEK 6 accessories are the
the industry’s most advanced fiber options,
FIBERTEK and TRACETEK. FIBERTEK
enables loss, length, bi-directional testing
over two fibers, and talkset over fiber capa­bilities for 850 and 1300 nm Multimode and
1310 and 1550 nm Singlemode fiber.

TRACETEK is the first fiber accessory
for a copper tester that will trace a
fiber run, locate distance to
events along the fiber, and
measure the magnitude of
the event. This capability
can eliminate the need
for a more costly OTDR
in campus network
environments.

■ Display unit comes with

1/4 VGA color screen,
remote unit comes with
two-line black and white
LCD display

■ Serial and US B ports for

uploading tests and
upgrading firmware

■ Two full-function

PC MCIA slots accept

compact flash

memory and

provide for future

capabilities

LANTEK 6 is fully upgrade-

able to LANTEK 7, protecting

your investment and giving

you the maximum flexibility in

meeting your evolving

certification needs.

LANTEK®6 LAN Cable Certifier

The LANTEK 6 display unit comes with the brightest 1/4 VGA color screen in
the industry. The remote unit has a two-line black and white LCD display to
enhance communications, and can initiate an AutoTest to increase productivity
in one-person operations. Both units have an overmolded edge to function in
the harshest environments.

Along with serial and USB ports, LANTEK 6 comes standard with two full-function
PCMCIA slots to accept compact flash memory and provide for future capabilities.
This allows for virtually unlimited test storage with graphs keeping your unit in
the field. LANTEK 6 comes with LANTEK Reporter PC software that can upload
stored tests from the serial or USB ports, or compact flash memory and can
create brief, summary, or detailed certification reports for your clients.

Get through your jobs faster than ever today and prepare yourself for the future
with LANTEK 6.

LANTEK 6 Range Resolution Accuracy

Length (50- 100 Ω cable) 0 – 2000 Ft 1 ft. ±(3% + 3 ft.)
Delay 0 – 8000 ns 1 ns ±(3% + 1 ns)
Average Impedance 35 – 180 Ω 0.1 Ω ±(3% + 1 Ω)
Capacitance (Bulk) 0 – 100 nF 1 pF or 3 dig ±(2% + 20 pF)
Capacitance 0 – 100 pF/ft. 0.1 pF ±(2% + 1 pF)
DC Loop Resistance 0 – 200 Ω 0.1 Ω ±(1% + 2 Ω)
Attenuation 1 – 350 MHz 0.1 dB Level III*
NEXT 1 – 350 MHz 0.1 dB Level III*
Return Loss 1 – 350 MHz 0.1 dB Level III*
ELFEXT 1 – 350 MHz 0.1 dB Level III*
Noise Floor < -90 dB
Dynamic Range > 90 dB

* Level III only specified to 250 MHz

Autotest Storage Capacity (Internal Memory)*

No Graphics Up to 6,000 Tests
With Graphics Up to 100 Tests

Autotest Storage Capacity (External 32 MB Flash)*

No Graphics Up to 24,000 Tests
With Graphics Up to 400 Tests with 32 MB

* Depending on Autotest Categories Up to 3,200 Tests with 256 MB

Autotest time (250 MHz) Approx. 25 seconds
Standard Test Compliance ANSI/TIA/EIA 568B, Category 6 (Draft), ISO C/D

and ISO E (draft), AS/NZS 3080, IEEE 802.3
Ethernet, EN50173, EN50173.A1

Cable Types UTP/ScTP/FTP;

CAT 3/5e/6; ISO C/D/E (Channel, Basic, and
Permanent Link)
IBM STP Type 1,2,6, Coax

Dimensions 10.1” x 5.0” x 2.3” Display & Remote

256mm x 127mm x 58mm Display & Remote

Weight 2.3 lb (1050g) – Display

2.0 lb (914g) – Remote

1.2 lb (548g) - Battery
Battery Packs NiMH (rechargeable)
Typical Operating Life (Battery) 8 hrs
Max. Operating Temp. 0°C – 50°C
Max. Storage Temp. - 20°C to + 70°C
Humidity 5-90 % noncondensing

LANTEK 6 comes standard with all the items necessary to
certify your job and create certification reports:

LANTEK 6 LANTEK 6P

Soft Carry Case ✔
Display unit with battery ✔✔
Remote unit with battery ✔✔
LANTEK Reporter Software ✔✔
Serial and USB cables ✔✔
Two AC wall adapters ✔✔
Two talksets ✔✔
User manual ✔✔
Quick Start Guide ✔✔
Registration Card ✔✔

Included are the following
adapters and Patch cords:

Two Category 6 channel adapters ✔✔
Two Category 6 Reference

Patch cords ✔✔

Premium Package:

Hard carry case ✔
PCMCIA adapter ✔
32 MB compact flash ✔
USB port flash reader for PC ✔
Offline battery charger ✔

Field calibration does not require a special adapter. It is
accomplished through connecting a patch cord between
the channel adapters.

IDEAL I NDUSTR I E S, INC.

9145 Balboa Av., San Diego, CA 92123 U.S.A.

Becker Place, Sycamore, IL 60 178 U.S.A.

225 Europa Boulevard, Gemini Business Park, Warrington

Gutenbergstrasse 10, 85737 Ismaning, Germany.

Form No. P-2217
© 2001 IDEAL INDUSTRIES, INC.

Tel: [phone]

Fax: [phone]

Toll-Free: [phone] in U.S.A.

Becker Place: (815) 895-518 1

Ajax, Ontario, L1S 2E1, Canada.

Toll-Free: [phone] in Canada.

Canada: (905) 683-34 00

IDEAL I NDUSTR I E S (U.K.) LTD.

Cheshire WA5 7TN, England

Tel: [phone]

Fax: [phone]

IDEAL I NDUSTR I E S GmbH.

Tel: [phone]

Fax: [phone]

www.idealindustries.com

PRINTED IN U.S.A.

12/01