Atec NT-IL User Manual

NetTool
Inline Network Tester
Network professionals know what a
challenge it can be to resolve a trou-
blesome desktop-to-network connec-
tivity problem. Bad RJ crimp? Wrong
e-mail server? Duplex mismatch? Or
There are three typical causes of a
network connectivity problem:
1. The PC is not properly configured
to take advantage of a particular
network resource
2. The network resource is not avail-
able (or active) on the network
3. There is a cable problem prevent-
ing this network connection
How do you tell what the problem
is? Fluke Networks has put an end to
the guessing game with the NetTool
Inline Network Tester. NetTool
Inline Mode – Connect between two net- work devices and listen to the traffic between them; detect common connec­tivity problems like speed and duplex mismatch, link problems, errors and much more
Identify PC’s Network Configuration – Review list of servers a PC is configured to use, including services offered, name, IP address and subnet
Problems Log – Alerts you to excessive errors, duplicate IPs, unanswered DNS queries, TCP/IP connection failures, and many more
Spot available network resources – See the IP address, MAC address, subnet, and services offered by active servers, routers and printers
Distinguish service offered at a net- work drop – Determine whether a drop is offering Ethernet, Phone, Token Ring, or is inactive
Verify connection speed, duplex, and utilization – At-a-glance, see vital link configuration and health information
Generate reports that document your troubleshooting – Download your test results into a PDF file format so you can document your network performance and efficiently escalate problems with hard data
Identify protocols being used by the PC and on the Network – IP, NetWare, NetBIOS, Apple, and other protocols are listed so you can detect protocol mis­matches, and isolate unwanted protocols that waste valuable bandwidth
Automatically Ping key devices – with one touch of a button, ping as many as 10 pre-selected devices to verify full net­work availability
Perform basic cable tests – Check a patch cable or a run of installed Ethernet wiring for length, shorts, split pairs, or opens, including pin-to-pin connection
Monitor network health – See frames sent, utilization, broadcasts, errors, collisions for full or half-duplex 10 or 100 MB connections, with individual counts for both the desktop and network conversations
combines cable, network, and PC
configuration testing in one
palm-sized tool, so you’ll have
everything you need to quickly
resolve even the toughest network
connectivity problem.
Technical Data
Vision into the network and PC connection
Inline functionality
NetTool Pro Model with ping and reporting
Minimum training time, maximum productivity
See network resources
Product capabilities
Inline functionality reduces testing time
and frustration Use NetTool to troubleshoot
PC and network connections. Connect
NetTool inline between a PC and the network
and it listens to their network traffic.
NetTool analyzes the link on both sides and
displays advertised and actual duplex, as
well as negotiated speed and link configura-
tion. Once NetTool completes the link analy-
sis, it reports on the PC-to-network conver-
sation while the PC accesses network
devices. NetTool displays the PC’s network
addresses and network servers used, and
detects speed and duplex mismatches and
other problems. NetTool reveals how the PC
is configured: MAC and IP addresses, servers
(DHCP, email, HTTP and DNS), routers and
printers used.
New NetTool Pro Model adds Ping and
Reporting Verify connectivity to other net-
work devices by using IP Ping features. Ping
a default router, a single device or a list of
up to 10 network devices. By adding Ping,
NetTool Pro dramatically shortens the trou-
bleshooting cycle. Pinging a key device such
as a router, server, or printer forces it to
immediately reveal that the device is active
on the network, completing a vital step in
the troubleshooting process. NetTool Pro also
adds new reporting capabilities so test
results identifying network resources and PC
configuration can be downloaded and shared
with other team members. This network doc-
umentation is especially helpful when work-
ing as part of a team or escalating the prob-
lem to a more experienced troubleshooter.
The NetTool Pro Model includes all the Inline
features and benefits as well.
Minimum Training Time, Maximum
Productivity NetTool is so easy to use, even
inexperienced technicians can get up to
speed quickly with minimal training. And it’s
priced so every technician can have one.
Reducing the time and expense associated
with troubleshooting PC and network con-
nection problems, NetTool dramatically
increases technician productivity.
Gold SuperVision Support
Fluke Networks SuperVision Support leads the industry with programs that protect
and add value to your investment. When you purchase Gold SuperVision Support,
you’ll receive unlimited priority technical support seven days a week, 24 hours a
day; free software application upgrades; and overnight exhange units so you’ll
never be without your NetTool.
Inline and Inline Pro models to match your testing needs.
Both models fit Inline between two network devices, and tell you what’s happening between them. The Pro model accelerates your testing by helping you quickly confirm that key devices are active on the network, and also helps you document your work. (Note: the NetTool Inline Model comes with 25-use trials of both Ping and Reporting functions of the Pro Model). The NetTool Inline Network Tester is a must for any net­work professional who installs or trou­bleshoots networked PCs.
FREE holster with registration
Register your NetTool Inline Tester and receive a FREE holster. This durable, soft case protects your NetTool and allows you to hang it up or wear it on your belt.
Registration qualifies you for 60 days or three incidents (whichever comes first) of free telephone support at +1 (800) 283-5853 (U.S. and Canada), 00 800 632 63200, or +44 1923 281 300 in Europe, or +1 (425) 446-4519 from all other countries. Registered customers may also access our Knowledge Base of operation and application articles located on our website.
Specifications
Media access 10BASE-T and 100BASE-TX
Identifies 10BASE-T, 100BASE-TX (full or half-duplex), Token Ring (4/16 Mbps),
Phone* (tip and ring pins), Inactive terminated and open network cables
Cable Tests Wiremap, cable length, opens, shorts, and split pairs. Accuracy: ±10% for
Cat 5 cable
Ports 2 Shielded Hub/NIC connector (RJ-45). Serial port customized 2.5mm “stereo” input jack Interface Push button navigation of icon/menu-driven view Power Removable alkaline batteries, optional rechargeable NiMH batteries or optional
A/C adapter. Approximately 20 hours continuous use with 4 alkaline batteries.
Dimensions 12.5 cm x 7.8 cm x 4.3 cm (5 in x 3 in x 1.7 in) Weight 210 g (.46 lbs.) Warranty One year (extended warranty available). LED Indicators One on each side reporting instantaneous utilization, and
one on each side reporting link, collisions and errors
*NetTool can detect telephone signals. However, it is not designed to be used on public telephone networks.
Improve Switched Network Visibility with OneTouch Series II Network Assistant
For an in-depth look
at your switched
network, be sure to
ask about another
powerful handheld
tester for frontline
troubleshooting.
Ordering Information
Model Description
NT-IL NetTool Inline Model
NT-PRO NetTool Pro Model
NetTool Inline and Pro models include NetTool Tester, serial cable, four AA
batteries, wiremap adapter, quick reference guide, and CD–ROM containing users
manual and NetTool Blaster update utility software.
Options and Accessories
Model Description
NT-IL-OPT NetTool Inline Option Only (Turns an NT into an NT-IL)
NT-PRO-OPT NetTool Pro Option Only (adds Ping and Reporting Features to any NetTool)
GOLD-NT NetTool Gold Priority Support
NT-AC-ADAPT NetTool AC Power Adapter
NT-BATT-CHG NetTool 900 mA Battery Charger
BATT-AA-NIMH AA Rechargeable Nickel Metal Hydride Battery Pack
NETWORKSUPERVISION
Fluke Networks, Inc.
P.O. Box 777, Everett, WA USA 98206 (800) 283-5853 Fax (425) 446-5043
Fluke Networks Europe
The Metro Centre, Unit 1, Dwight Road Watford, Hertfordshire, WD18 9HG U.K. 00800 632 632 00, +44 1923 281 300 Fax 00800 225 536 38
Canada (800) 363-5853 Fax (905) 890-6866 M-East/Africa +44 1923 281 300
Fax +44 1923 281 301 Other countries call (425) 446-4519 Fax (425) 446-5043
E-mail: fluke-assist@flukenetworks.com Web access: http://www.flukenetworks.com
2002 Fluke Networks, Inc. All rights reserved. Pentium is a
©
registered trademark of Intel Corporation. Visio, Windows and NT are registered trademarks of Microsoft Corporation. IPX is a registered trademark of Novell Corporation. NetBIOS is a trademark of International Business Machines Corporation. Printed in U.S.A. 6/2002 1567676 D-ENG-N Rev D
Loading...