Atec Networks-FTK1450 User Manual

Page 1
Optical Power Meter and Fiber Test Kits
SimpliFiber Pro makes testing simple
Fluke Networks’ SimpliFiber® Pro Optical Power Meter incorporates new and innovative features to give technicians a tool that performs and reports test results like no other first-line fiber test tool can.
The only way to accurately test and verify the performance of your fiber-optic network is with test equipment designed for the job. The SimpliFiber® Pro Optical Power Meter and Fiber Test Kits is a suite of affordable and easy-to-use fiber verification test solutions. Today’s high bandwidth premise networks heavily rely on fiber-optic infrastructure. Proper installation and maintenance of fiber cabling is imperative to improve technician productivity and ensure cabling system performance.
See how Fluke Networks’ suite of innovative installation and test solutions improves techni­cian productivity and ensures cabling system performance.
SimpliFiber Pro is an improved fiber test set
that simplifies and shortens the front-line
testing process by:
• reducing the multiple steps and
using a simultaneous dual-wavelength
testing feature to measure the range of
power levels in just half the time
• allowing for a non-touch solution to
check for a live fiber without having
to plug into ports
• enabling a network technician to do
time-consuming procedures that
normally require a team
SimpliFiber® Pro Optical Power Meter and
Fiber Test Kits provide you with all the tools
you need to help you verify proper installation
and maintain fiber-optic cabling systems.
Available in kits or a la carte, these tools are
simple and effective and provide you with the
capability to measure loss and power levels,
locate faults and polarity issues, and inspect
connector end-faces.
A system approach
SimpliFiber Pro is a product suite that allows
you to match products and functionality to
your needs. SimpliFiber Pro is made up of four
unique fiber platforms: the power meter, the
multimode source, the singlemode source,
TM
and the FindFiber
Each platform has uniquely competitive
features, bundled in convenient kits, to
meet the needs of today’s technicians.
The optical power meter is included in all kits
and is calibrated for accuracy at six different
wavelengths (850, 1300, 1310, 1490, 1550,
1625). The meter features the ability to save
a reference power level, allowing a direct
display of fiber loss. It also has an intuitive
four-button panel, a large LCD display screen,
and a serial port. The meter’s single connec-
tor permits simple network connection and
straightforward reference power measurement.
Interchangeable connector adapters are
available in the most popular connector styles.
Remote ID source.
Technical Data
SimpliFiber Pro makes fiber-link verification and troubleshooting even simpler.
Page 2
Patch Panel
Fiber Links
SimpliFiber Pro
meter
ID #3
ID #4
ID #5
Figure 1. Using FindFiber mode to locate fibers –
patch panel to wall outlet
Patch Panel
SimpliFiber Pro
meter
Fiber Links
ID #6 ID #7 ID #8
Figure 2. Using FindFiber mode to locate fibers –
patch panel to patch panel
Patch Panel
Patch Panel
Fiber Links
SimpliFiber Pro
meter
ID #3
ID #4
ID #5
Fiber Links
ID #3
ID #4
ID #5
Figure 1. Using FindFiber mode to locate fibers –
patch panel to wall outlet
ID #3
ID #4
ID #5
ID #6 ID #7 ID #8
Figure 2. Using FindFiber mode to locate fibers –
patch panel to patch panel
Patch Panel
The multimode source is a dual wavelength
850/1300 source and incorporates an 850 nm
LED and a 1300 nm LED, perfect for
multimode fiber testing. You can add an
optional singlemode 1310/1550 source to
any kit as your testing needs evolve. These
laser sources are ideal for all singlemode fiber
testing. All sources are compatible with the
SimpliFiber Pro optical power meter.
The FindFiber™ Remote ID source is a new
platform in the Fluke Networks family. When
used with the optical power meter, these
remote ID sources allow for quick and easy
cable-routing identification.
User-friendly
Although they are effective as separate tools,
the SimpliFiber Pro optical power meter and
sources are engineered to work together.
The automatic wavelength-sensing feature of
the meter identifies the source wavelength
and sets itself appropriately so you do not
have to. This simplifies multi-wavelength
tests and saves at each wavelength to pre-
vent costly measurement errors. The compact
SimpliFiber Pro optical power meter and
sources are durable and rugged. They feature
textured, impact-resistant covers and a
compact, ergonomic shape for a comfortable
and secure grip. Long battery life assures
hours of trouble-free operation.
Verify optical loss and power levels
The SimpliFiber Pro optical power meter is
calibrated for accuracy at 850 nm, 1300 nm,
1310 nm, 1490 nm, 1550 nm and 1625 nm.
The meter features the ability to save a
reference power level, allowing a direct
display of fiber loss. It has an intuitive
four-button panel, a large LCD display screen,
and a USB port to upload test results to a PC
running LinkWare™ Cable Test Management
Software. SimpliFiber Pro sources include a
dual-wavelength 850/1300 nm source and
dual-wavelength 1310/1550 nm source.
TM
The FindFiber
at 1310 nm.
Remote ID sources transmit
Conduct pre-testing with
minimal resources
The FindFiber™ remote ID sources allow you
to identify the physical location of cabling
runs to ensure polarity and the correct
location on each fiber drop (Figure 1 and
Figure 2). This time-saving feature enables a
single technician to quickly perform double-
ended testing – ideal for pre-testing a job
site before any adds, moves, or changes.
Ensure smooth, clean fiber connections
Inspect the ends of fiber-optic connectors
with Fluke Networks’ handheld FiberInspec-
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
tor™ Mini video microscope or FiberViewer™
microscopes. All options ensure your termina-
tion is smooth, clean, and ready for optical
transmission. The FT500 FiberInspector Mini
can be used in any live fiber installation and
provides 200x viewing. The FT120 FiberViewer
provides 200x magnification for inspecting
multimode fiber end-faces while the
FT140 FiberViewer offers 400x viewing for
singlemode installations. Both FiberViewer
microscopes contain a special safety filter
to minimize the risk of eye exposure to
harmful infrared rays.
FAX 781.665.0780 - TestEquipmentDepot.com
Page 3
Verify and locate faults
Diagnose and repair simple fiber link problems with Fluke Networks’ VisiFault™ Visual Fault Locator (VFL). The laser-powered VisiFault locates fibers, verifies continuity and polarity, and helps find breaks in cables, connectors, and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5 mm and 1.25 mm (with optional adapter) connectors for
easy connection.
Reporting made simple
Manage test results, print professional reports, or export data into spreadsheet formats. SimpliFiber Pro can internally store up to 1000 test results which can then be uploaded to your PC using the included
LinkWare™ Cable Test Management Software.
Features
• Dual-wavelengthtesting
• Testsmultimodeandsinglemodeber
Feature Description Benefit
Dual-wavelength testing
CheckActive™
FindFiber™ Remote ID
Auto wavelength
USB port
Saves 1000 results
Min/max
Six calibrated wavelengths
Simultaneously test and save records from two wavelengths
Connect to a fiber without any setup and show with a simple icon and an audible tone whether that fiber is active.
Identify the physical location of cabling runs to ensure polarity and the correct location on each fiber drop. Encoded source signal 1-8.
Automatic identification of wavelength being transmitted.
Data connectivity via USB 2.0. Download results faster –
Save and label each test conducted. Collects test results from multiple
Allows immediate access to power range highs and lows in a testing session.
Calibrated to extend from typical enterprise wavelengths to two new popular wavelengths.
Cuts testing time in half by eliminating the need to test at each wavelength separately.
Know for sure if connectors and ports are live. Allows quick visual and audible identification of a live link or port on a switch.
Allows for quick and easy cable-routing identification and reduces confusion.
Allows double-ended testing with only 1 technician. Ideal for pre-testing
a job site before any adds, moves, or changes. Allows for mapping verification and easy documentation.
Eliminates time-consuming mistakes by automatically detecting which source wavelength is transmitting. Allows measurements from both wavelengths at to be saved in one record.
no specialty cables required.
building sites in a day and requires
only one download.
Precisely identifies intermittent power fluctuations. Eliminates
unreliable and inaccurate guesswork.
Power meter can be used for broader applications.
• Measuresopticalpowerandlossat850nm and 1300 nm using the 850/1300 source and meter
• Measuresopticalpowerandlossat 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources
• Offersquickremoteidenticationof cabling runs with FindFiber Remote IDs
• Conductpre-testingandqualify cabling runs
• Auto-sensessourcewavelength
• Saves1000testresults
• Singleporttestingforsimplenetwork
connection
• Ruggedlybuiltfordemandingelduse
• LinkWare™CableTestManagement
Software documents, reports, and manages all test data
FKT1450 Complete Fiber
Verification Kit
Page 4
SimpliFiber Pro Kit Ordering Information
Model Description
SFPOWERMETER SimpliFiber Pro optical power meter
SFSINGLEMODESOURCE SimpliFiber Pro singlemode 1310/1500 source
FTK1000 Basic Fiber Verification Kit: Includes SimpliFiber
Pro optical power meter, 850/1300 multimode source, and carrying case
FTK1300 Multimode Fiber Verification Kit: Includes
SimpliFiber Pro optical power meter, 850/1300 multimode source, VisiFault VFL, FT120 FiberViewer, FindFiber Remote ID sources, and carrying case; ST and LC adapter
FTK1350 Multimode Fiber Verification Kit with FT500
FiberInspector Mini: Includes SimpliFiber Pro optical power meter, 850/1300 multimode source, VisiFault VFL, FT500 FiberInspector Mini, FindFiber Remote ID sources, and carrying case; ST and LC adapter
FTK1450 Complete Fiber Verification Kit with FT500
FiberInspector Mini: Includes SimpliFiber Pro optical power meter, 850/1300 multimode source, 1310/1550 singlemode source, VisiFault VFL, FT500 FiberInspector Mini, two (2) FindFiber Remote ID sources, and carrying case; ST and LC adapter, NFC-Kit-Box fiber optic cleaning kit
FTK2000 Singlemode Fiber Verification Kit: Includes
SimpliFiber Pro optical power meter, 1310/1550 singlemode source, and carrying case
FindFiber One (1) FindFiber Remote ID source
FindFiber-6 Set of six (6) FindFiber Remote ID sources
GLD-FTK Gold Support package for SimpliFiber Pro
SimpliFiber Pro Accessories Ordering Information
Model Description
NFK1-SMPLX-SC 62.5 uM simplex reference cord set (SC/SC x 2);
special patented damage-resistant end-faces
NFK1-SMPLX-LC 62.5 uM simplex reference cord set (SC/LC, LC/LC);
special patented damage-resistant end-faces
NFK1-SMPLX-ST 62.5 uM simplex reference cord set (SC/ST, ST/ST);
special patented damage-resistant end-faces
NFK2-SMPLX-SC 50 uM simplex reference cord set (SC/SC x 2);
special patented damage-resistant end-faces
NFK2-SMPLX-LC 50 uM simplex reference cord set (SC/LC, LC/LC);
special patented damage-resistant end-faces
NFK2-SMPLX-ST 50 uM simplex reference cord set (SC/ST, ST/ST);
special patented damage-resistant end-faces
NFK3-SMPLX-SC SM simplex reference cord set (SC/SC x 2);
special patented damage-resistant end-faces
NFK3-SMPLX-LC SM simplex reference cord set (SC/LC, LC/LC);
special patented damage-resistant end-faces
NFK3-SMPLX-ST SM simplex reference cord set (SC/ST, ST/ST);
special patented damage-resistant end-faces
NFA-SC-SINGLE SC interchangeable adapter
NFA-LC-SINGLE LC interchangeable adapter
NFA-ST-SINGLE ST interchangeable adapter
General Specifications
Temperature range Operating: -10 0C to 50 0C
Humidity range 95% (10 0C to 35 0C) non-condensing;
Certifications CE, CSA, N10140, Class 1 laser-safe
Dimensions Power meter: 6.4 in x 3.2 in x 1.5 in
Weight Power meter: 11.5 oz (325 g)
Storage: -20 0C to 50 0C
75% (35 0C to 40 0C) non-condensing; uncontrolled <10 0C
(16.5 cm x 8.0 cm x 3.9 cm) MM/SM sources: 5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1 cm)
MM/SM sources: 9.8 oz (278 g)
Optical Sources
Optical output connector Fixed SC
Emitter type 850/1300: LED
Emitter wavelengths 850, 1300, 1310, 1490, 1550, 1625
Power output (minimum) MM: -20 dBm
Power output stability (8 hours)
MM battery life (2 x AA IEC LR6)
SM battery life (2 x AA IEC LR6)
FindFiber battery life (2 x AA IEC LR6)
1310/1550: FP Laser FindFiber: Laser
SM: 8 dBm minimum;
-7 dBm nominal
MM: +/- 0.1 dB over 8 hours SM: +/- 0.25 dB over 8 hours
40 hours typical
30 hours typical
80 hours typical
Optical Power Meter
Power measurement accuracy +/-0.25 dB
Optical connector Removable adapter; SC adapter standard;
Detector type InGaAs
Calibrated wavelengths 850, 1300, 1310, 1490, 1550, 1625
Power measurement range 850: 10 to -52 dBm
Power measurement linearity 850 nm: +/- 0.2 dB; +/- 0.2 dB for power
Resolution 0.01 dB
Battery life >50 hours typical
Memory 1000 loss or power measurements
Serial communication physical interface
Optional adapters include LC, ST
1300, 1310, 1490, 1550, 1625: 10 to -60 dBm
from 0 dBm to -45 dBm, +/- 0.25 dB for power < -45 dBm; 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm: +/- 0.1 dB; +/- 0.1 dB for power from 0 dBm to -55 dBm, +/-
0.2 dB for power > 0 dBm and < -55 dBm
USB
Loading...