Atec Netwave-3-Phase User Manual
DATA SHEET > NetWave Series 3-phase > 20130606
NETWAVE SERIES (3-PHASE)
THREE-PHASE MULTIFUNCTIONAL AC/DC POWER SOURCES
FOR TESTS ACCORDING TO ...
> AIRBUS
> BOEING
> DO 160 Section 16
> EN 61000-3-11
> EN 61000-3-12
> EN 61000-3-2
> EN 61000-3-3
> EN 61000-4-13
> EN 61000-4-14
> EN 61000-4-17
> EN 61000-4-27
> EN 61000-4-28
> EN 61000-4-29
> IEC 61000-3-11
> IEC 61000-3-12 Ed.2:2011
> IEC 61000-3-2
> IEC 61000-3-3
> IEC 61000-4-13
> IEC 61000-4-14
> IEC 61000-4-17
> IEC 61000-4-27
> ...
NETWAVE - SIMULATION OF THE MOST REQUIRED POWER SUPPLY PHENOMENON
The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to meet the requirements as per
the standards IEC/EN 61000-4-13, -4-14, -4-27(*) and -4-28. It is also used as a DC power source to cover the requirements
as per the standards IEC/EN 61000-4-17 (Ripple on DC) and IEC/EN 61000-4-29 for voltage dips and interruptions on DC
supplies. The NetWave series is well suited for testing inverters (e.g. solar power, wind power) and e-vehicles. Additionally,
the NetWave series (3-phase) offers the necessary capabilities for avionics testing as per DO-160, Airbus ABD0100 and
Boeing as well as per MIL-STD-704.
Optionally the NetWave 3-phase series can be equipped with a power-recovery module to absorb fed-back power (AC/DC) up
to nominal power of the NetWave. (*) pre-compliant
HIGHLIGHTS
> Wide Power Bandwidth; DC - 5kHz
APPLICATION AREAS
INDUSTRY
AVIONICS
> Output Power up to 60,000VA AC / 72,000W DC
> Output Voltage up to 3*360V AC (p-n), +/-500V DC
MEDICAL
MILITARY
> High Inrush Current Capability
RESIDENTIAL
RENEWABLE ENERGY
> Power-recovery up to nominal power (optional)
www.emtest.com © EM TEST > PAGE 1/6
DATA SHEET > NetWave Series 3-phase > 20130606
TECHNICAL DETAILS
MODEL OVERVIEW
3-PHASE NETWAVE-MODELS
NetWave 20.x 3-phase Multifunction AC/DC source,
22,500VA AC / 27,000W DC
NetWave 30.x 3-phase Multifunction AC/DC source,
30,000VA AC / 36,000W DC
NetWave 60.x 3-phase Multifunction AC/DC source,
60,000VA AC / 72,000W DC
TECHNICAL DETAILS
NETWAVE 20
Output voltage 0V - 3*300V AC (p-n)
0V - +/- 425V DC
Output current 26A (RMS) continuous
47A (RMS) short-term (max. 3s)
200A repetitive peak
TECHNICAL DETAILS
NETWAVE 60
Output voltage 0V - 3*300V AC (p-n)
0V - +/- 425V DC
Output current 66A (RMS) continuous
100A (RMS) short-term (max. 3s)
400A repetitive peak
NETWAVE 60.2
Output voltage 0V - 3*360V AC (p-n)
0V - 3*620V AC (p-p)
0V - +/- 500V DC
Output current (@
max. 300V AC)
EXTENDED CAPABILITIES FOR NETWAVE
Simple mode Optimized control for integration of
66A (RMS) continuous
100A (RMS) short-term (max. 3s)
400A repetitive peak
the Netwave into existing
automation environments (for
example Matlab)
NETWAVE 20.2
Output voltage 0V - 3*360V AC (p-n)
0V - 3*620V AC (p-p)
0V - +/- 500V DC
Output current (@
max. 300V AC)
NETWAVE 30
Output voltage 0V - 3*300V AC (p-n)
Output current 33A (RMS) continuous
NETWAVE 30.2
Output voltage 0V - 3*360V AC (p-n)
Output current (@
max. 300V AC)
26A (RMS) continuous
47A (RMS) short-term (max. 3s)
200A repetitive peak
0V - +/- 425V DC
66A (RMS) short-term (max. 3s)
250A repetitive peak
0V - 3*620V AC (p-p)
0V - +/- 500V DC
33A (RMS) continuous
66A (RMS) short-term (max. 3s)
250A repetitive peak
SourceAC mode PLL synchronization with other
voltage sources
Trigger channel Extended trigger functions
Segment "Step" Ramping of voltage and/or frequency
in constant time windows
Extern mode Control of the NetWave by an
external control signal
www.emtest.com © EM TEST > PAGE 2/6
Loading...