Atec NBM-520 User Manual
Electric and Magnetic Field Measurement
NBM-520 Broadband Field Meter
Available with Isotropic Probes to cover
♦
100 kHz to 60 GHz
♦
Plug-and-Play Probe Interface with Automatic
Probe Parameter Detection
♦
Fully Automatic Zeroing
♦
Extra Small and Lightweight
♦
Easy 4 Button Operation
♦
Remote Operation via Optical Link
♦
Interoperability with NBM-550 (Controller)
Rugged and Lightweight Housing
designed for easy one-hand operation.
Interchangeable plug-and-play probes,
no need for configuration
Description
The NBM-500 Series is the most accurate non-ionizing radiation survey system
available. It provides the broadest frequency coverage of electric and magnetic
fields. Both flat response probes and probes shaped to international standards
are available. All NBM probes have a non-volatile memory containing device
parameters and calibration data. Probes are calibrated independently of the
meter. Any NBM probe can be used with any NBM-500 Series meter and still
maintain total calibration.
Applications
Precision measurement of electric and magnetic field strength for personal
safety at work where high radiation levels are present, such as:
General RF Safety program measurements
•
Service work on transmitting and radar equipment
•
Service work on mobile antennas, broadcasting and satellite
•
communication systems
Working with heating and hardening machines in the industry
•
Operating diathermy equipment and other medical instruments
•
producing short-wave radiation
Drying equipment in the tanning and timber industries
•
narda Safety Test Solutions an communications company USA • Germany • Italy
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: NardaSTS@L-3COM.com • www.narda-sts.us
57
Electric and Magnetic Field Measurement
NBM-520 Broadband Field Meter
Features
Easiest 4 button operation
•
Automatic probe type recognition
•
Intelligent probes (automatic probe data transfer)
•
Audible alarm function (threshold adjustable by PC software)
•
Auto-Zeroing (time interval adjustable by PC software)
•
Time Averaging (time adjustable by PC software)
•
Spatial Averaging (discrete samples or continuously)
•
Maximum Hold display function
•
Calibration Due Date check by PC software
•
LCD Backlight (adjustable illumination time by PC software)
•
Auto Power-Off (adjustable time by PC software)
•
Selectable unit (V/m, A/m, mW/cm2 or W/m2, % for shaped probes)
•
Hold key to freeze the current display
•
Optical link to connect to a PC
•
Remote control via optical link
•
Interoperability with NBM-550 (NBM-550 controls NBM-520)
•
PC software included for instrument setup and remote testing
•
Probe
Model
Status
Result
Type of
Field
NBM-520 LCD Display Description
Battery
Level
Mode
Result
Unit
PC Software
The NBM-TS transfer software is used for:
changing instrument settings
−
controlling firmware updates
−
performing remote controlled measurements
−
58
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: NardaSTS@L-3COM.com • www.narda-sts.us
narda Safety Test Solutions an communications company USA • Germany • Italy
Loading...