Atec MT9083A User Manual

Download

Manufacturers > Anritsu Categories > Communications Testing > Fiber Optic Testers > Optical Time Domain Reflectometers

Anritsu MT9083A Access Master Product Page

MT9083A ACCESS MASTER OVERVIEW & SPECIFICATIONS

780/1310/1383/1490/1550/1625/1650nm (single mode), 850/1300nm (multimode)

How-To Video

All-in-One Solution for Optical Fiber Construction and Maintenance of Access, FTTx, LAN and Metro Networks

MT9083A ACCESS MASTER OVERVIEW

Optical fibers are a key technology in today’s modern communications systems, including access networks such as FTTx, CATV, and optical LANs. Moreover, optical-fiber technologies are playing increasingly important roles in mobile communications and digital broadcasting systems. Technicians maintaining these diverse systems are forced to carry a large variety of test equipment on-site, including OTDRs, Light Sources, Optical Power Meters, Visible Light Sources, etc., as well as a notebook computer for evaluating the FTTx QoS. On the other hand, fiber construction requires measuring instruments with different functions and performance. As an example, FTTx access networks use single mode (SM) fiber whereas optical LANs use multimode (MM) fiber. In addition, core and backbone networks utilize long fibers while optical access networks use short fibers, both requiring different types of measuring instruments with different performance. But now Anritsu’s new line of MT9083A ACCESS Master OTDRs solves all these problems by providing all the measurement functions and performance required for optical fiber construction and maintenance in a compact, lightweight, all-in-one unit that eliminates the burden of carrying many different test sets and instruments on-site. Whatever your work, construction or maintenance, long haul or intra-building, Anritsu has an MT9083A model for your needs.

Key Features

• Ready to test in less than 15 seconds…and all day without recharging

• Specialized testing modes simplify operation

• High resolution and

• Intelligent analysis software identifies problem splices, connectors and even macrobends

• Rugged, sealed design provides years of service in the most challenging environments

• IP testing option verifies throughput, frame loss and point-to-point connectivity

• Test up to four wavelengths with a single unit – single mode, multimode or both

• Unique in-service testing without the need for external filters

high dynamic range ensure thorough and complete fiber evaluation

ISO 9000:2001 certified. IMT9083A-SPEC01-0609-A4

Designed with the Features that Matter Most

When buying products, you tend to choose ones that are innovative and from established companies. When you need to install

and maintain optical networks, this should also apply. With over 50 years of combined OTDR design, Anritsu, which now

includes NetTest, delivers the features that matter.

Having been in the test and measurement business for a long time, we understand that things like performance, portability, reliability, easy operation and of course price are important.

Quick Startup

The MT9083A is ready for measurement just 15 seconds after

power-on so productive work can start immediately.

Long Battery Life

Since AC power is not always available where you need it,

especially at fiber pedestals, the MT9083A typically provides up to 8

hours of operation on a single charge. This coupled with an optional

car cord (for cigarette lighter operation) guarantees the MT9083A is

ready when you are.

Portable

With its light weight design and user friendly dimensions, the

MT9083A is perfect for the outside plant environment and can easily

be managed with one hand. The shoulder strap (part of the

protector option) further increases portability when traveling from the

truck to the testing site.

Rugged

The MT9083A features a solid casework with no fans or vents to

allow dust or moisture from entering the unit. In addition, the

protector option (MT9083A-010) includes rubber bumpers and a

display cover for additional protection from those minor mishaps.

Generous Data Storage

With the ability to store up to 1,000 traces in internal memory and up

to 30,000 via a USB device, the MT9083A offers plenty of storage

for collecting and managing data.

No Experience Required

With the MT9083A, the experience is built in. With specialized testing

modes, automatic parameter selection, PASS/FAIL indicators as well

as features to virtually eliminate the chance to get “bad” results, the

MT9083A can make anyone seems like a 20 year veteran. It’s not

called the ACCESS Master for nothing!

Easy “drag and drop” File Transfers

When the MT9083A is connected to a PC via a USB cable, the

internal memory of the ACCESS Master can be directly accessed.

Data can be selected, dragged and dropped into the PC memory,

greatly simplifying file transfers. The MT9083A also supports use of

USB memory sticks.

Common OTDR Data Format

The MT9083A supports the universal Telcordia SR-4731 (issue 2)

format making it compatible with not only legacy Anritsu and NetTest

products, but with many other vendors data.

Free and Simple Software Upgrades

Firmware upgrades are easily performed via USB and available from

the Anritsu website for registered users or through Anritsu customer

support.

With its versatile built-in functions, the MT9083A offers the ideal solution for efficient optical fiber construction and maintenance.

All-in-one Test Set

The MT9083A delivers full featured OTDR performance plus loss test set and quality of service measurement in a surprisingly

small and lightweight package. At only 28.4cm wide x 20cm tall x 7.7cm deep and 2.2 kg (4.8 lbs.), it is field portable, yet

rugged enough to withstand the outside plant environment. When equipped with power meter, visual light source and IP test

options, it replaces several, larger pieces of test equipment.

Numeric keypad with

dedicated keys for

easy operation

Rotary dial for precise cursor

movement

Arrow keys for quick

zooming and

navigation through

menus

6.4 inch color, TFTLCD display with

simple menus

Visible laser source for easy fiber identification

and bend/break

location

* Shown with protector option (MT9083A-010)

Up to four wavelengths

from a single port for

any application

Dual USB ports for quick

and easy data transfer

START key for simple

one-button testing

Dedicated function keys for

selecting parameters

* Shown with protector option (MT9083A-010)

Up to 8 hour battery

life plus quick

recharge

Optical Power meter

options with up to +30 dBm

measurement range

IP options for verifying QoS of 10/100/1000MB

links

Exceptional OTDR Performance…from the World’s First OTDR Manufacturer

Evaluation of access networks ranging from a few kilometers to metro networks reaching up to 100 km in length is becoming

commonplace, requiring OTDRs to have the performance and functions for evaluating both short and long fibers. Designed

with this in mind, the ACCESS Master delivers on both fronts.

Improved Short Fiber Analysis

An event dead zone of less than 1m (80 cm typical) and a

sampling resolution of 5 centimeters allow the MT9083A

to evaluate connections and troubleshoot central office,

FTTx and intra-building faults with ease – providing a

level of detail never before seen.

Fig. 1: With its high resolution optics, the MT9083A provides exceptional detail allowing users to quickly determine where the problem is – even when events are closely spaced.

Convenient Features

Extended Range Testing of 100+km Fibers

In addition to its superb high-resolution performance, the

MT9083A also features up to 38.5dB of dynamic range

allowing it to easily test 100+ km spans making it a very

useful tool for any network type.

Fig 2: Spans of over 100 km are also easily tested making the MT9083A the only tool you will need - for any network type.

Active Fiber Check

Not only can OTDR measurements be effected when the

optical fiber is in-service but there is a potential risk of

damage to the transmitter and OTDR receiver. To prevent

these problems, the MT9083A verifies if light is present

before starting measurement and will not transmit if it is.

An on-screen warning and internal OTDR protection are

also part of this useful feature.

Waveform Comparison Function

Compare current and stored trace data to easily assess

changes over time and to locate problems before they effect

service or compare traces at different wavelengths to

identify installation issues such as macrobending.

Integrated Macrobend Detection

With many technicians making the switch from copper

installations to optical fiber, installation issues such as

macrobends are bound to occur. To help prevent this,

Anritsu has developed a macrobend detection feature for the

MT9083A that will alert technicians when a possible

macrobend is present. This provides a higher quality of

service for the customer and eliminates costly

troubleshooting for you.

Event Table with User Defined Thresholds

PASS/FAIL thresholds for key acceptance criteria such as

splice loss, connector loss and reflectance can be set in the

MT9083A allowing technicians to easily assess a fiber’s

condition. Failing values are clearly highlighted in the

event table alerting technicians of potential problems.

Multiple Wavelengths and Models

With nine available wavelengths spanning both single

mode and multimode, the ACCESS Master MT9083A is

sure to meet your individual needs. Up to four of these

wavelengths can be combined into a single optical output

providing full spectrum characterization.

Wavelengths for Today’s Networks

Sometimes you just need more than the traditional 1310

and 1550 nm wavelengths to certify your next generation

networks. The MT9083A offers a host of specialized

wavelengths including1383 nm for water peak verification

of CWDM carrying fibers, 1650 nm (with integrated filter)

for live fiber troubleshooting, 1490 nm for verification of

voice, data and IP based video services and 780 nm for in-

service troubleshooting of FTTx networks - without the

need for any additional filters.

Solutions for Various Measurement Needs

Products that offer many features are often complicated to use. The MT9083A however, simplifies operation by offering task-

specific testing modes that automate testing and guide novice users. Dedicated testing modes are available for fault location,

cable installation, loss budget testing, visual fault location and IP testing.

Simple Operation

To simplify testing, the MT9083A features dedicated

measurement modes via the top menu to automate and

simplify the task at hand.

Fig.3: Dedicated measurement modes simplify testing for any skill level

Fault Location

FAULT LOCATE mode is designed for the novice or

someone who only uses an OTDR occasionally. Simply

connect the fiber and press START. The unit will verify the

fiber is connected correctly, select testing parameters and

provide a text response indicating fault/break location - easy

to read results for any skill level.

General OTDR Testing

For those who have more experience or would like to

perform more advanced testing, STANDARD OTDR mode

allows the user to set all parameters and compare traces

manually, automatically or somewhere in between.

Optical Fiber Construction and Certification

When final cable acceptance is the task at hand,

CONSTRUCTION mode greatly simplifies operation

through its innovative wizard. Select the required testing

wavelengths, number of fibers and file naming scheme and

construction mode acts as the project manager guiding the

user through the testing, while ensuring consistency with

testing parameters and filenames – virtually eliminating user

induced errors and missing files.

Value

Whatever your construction or maintenance needs, the new

ACCESS Master MT9083A is designed to reduce the time

to install, commission and maintain your optical networks –

without breaking your budget.

NETWORKS PC Software for Analysis and Reporting

Once the data is collected, NetWorks PC emulation software

makes analysis and report generation a breeze. Professional

reports including splice loss, fiber acceptance and exceptions

as well as various printing options are possible with only a

few mouse clicks.

Fig.4: Comprehensive, professional reports are easily generated

Fig.5: Various printing options ensure you have the results you need.

A True all-in-one Tester

An OTDR, Optical Power Meter, Visible Light Source, and IP tester are built into Anritsu’s compact, light-weight MT9083A

supporting tasks ranging from searching for faults in optical fibers to QoS evaluation to FTTx troubleshooting with just one

unit.

Complete Loss Test Set Features

Standard Stabilized Light Source

The OTDR port also functions as a stabilized light source

providing continuous wave, 270Hz, 1kHz and 2kHz

modulations for easy fiber identification. This is standard

equipment on all models – a chargeable option on most

other OTDRs.

Standard Integrated Power Meter

In the base unit, the OTDR port also functions as an

integrated power meter for verification of optical power

levels. Additional power meter options are available for

higher power transmissions and loop-back testing.

Visual Laser Source for easy fault location and fiber identification

A Visible Light Source is useful for tracking down bad

connections, splices and fiber management issues such as

macrobends. The optional Visible Light Source is factory

installed in the MT9083A and features up to 5 km (3 miles)

of operation.

Optical Power Meter Options - up to +30 dBm

In place of the standard power meter, the MT9083A offers

three optional optical power meters; one supports both SM

and MM fibers (MT9083A-003) while the others feature

higher measurement range for SM only applications (-004, -

005). When measurement of high optical powers, typically

more than +20 dBm (like those used by CATV companies) is

required, power meter (Option 005) using an optical

integrator sphere can be used to make long-term

measurements with high stability at levels above +30 dBm.

Data Table for Saved Results

Loss test set measurements for multiple wavelengths can be

saved into a results table for easy comparison and archiving.

The table can also be saved as a text file and exported to a

PC spreadsheet program for further manipulation or

integration into a standard company template.

Optical Access Network QoS Evaluation Using IP Test

Faults that cause drops in FTTx service speed are handled differently according to whether the cause is outside or inside the

building. In addition, business users are starting to think about guaranteed bandwidth services and higher-speed gigabit

services. The MT9083A has a built-in IP Network Connection Check function that can be used for both optical fibers and

optical access QoS evaluation.

Connection and Ping Tests

The first step in testing a service is to verify continuity. The built-in IP

Connection Test Function supports both PPPOE and DHCP services.

FTTx Download Speed Evaluation

FTTx service performance is easily evaluated from the download

throughput. Previous evaluation systems were always limited by the PC

performance (CPU speed, memory size, OS, load) and never provided

accurate measurements. Using the MT9083A Download Throughput

Measurement function frees the results from the impact of PC

performance and provides accurate results. This allows the causes of

drops in FTTx service speeds to be pinpointed to the network side or

the user’s PC side.

Throughput Measurement and Frame Counter

The MT9083A has a two-way throughput measurement function for

efficient evaluation of guaranteed bandwidth services. When an

MT9083A is connected to each end of the service, both the upload and

download speeds can be evaluated. And since the built-in frame

counter functions can be used to measure received frame types and to

count error frames, network usage efficiency can be measured easily

too.

Gigabit Ethernet Support

The MT9083A has an optional built-in 1000Base-T electrical interface

for evaluating Gigabit Ethernet throughput (up to full line rate) for

verifying performance on increasing common Gigabit Ethernet services.

Faults Identified

When issues are present, possible causes are displayed on-screen to

help isolate the source of the problem.

MT9083A ACCESS MASTER SPECIFICATIONS

Item

Without protector (option 010)

Dimensions and mass

With protector (option 010)

Display 6.5 inch TFT-LCD (640×480, with backlight, transparent type) Interface USB 1.1, TypeA×1譆memory譙, Type B×1譆USB mass storage).

Data Storage

Power supply

Battery

Power saving functions

Vertical scale 0.05, 0.125, 0.25, 0.5, 1.25, 2.5, 5, 6.5 dB/div IOR setting 1.000000 - 1.999999 (0.000001steps) Units km, m, kft, ft, mi Languages user selectable (English, Simplified Chinese - contact Anritsu for availability of others)

Sampling Points*2 Sampling Resolution 5 cm (min) Reflectance Accuracy Single mode: +2 dB, multimode: +4 dB Distance accuracy + 1m + 3 x measurement distance x 10

Distance Range

Testing Modes

Internal memory: 20 MB (~1000 traces) External memory (USB): ~30,000 traces with 512 MB

12 VDC, Allowable input voltage range: 10.8 – 15 VDC 100 to 240 VAC, Allowable input voltage range: 90 to 264 V, 50/60 Hz

Type: Lithium ion Operating Time*1: 8 hours Recharge Time: <5 hrs (power off)

Backlight off: disable/1–99 minutes Auto shutdown: disable/1–99 minutes

Normal: 5001, High density: 20001 or 25001

Single mode: 0.5, 1, 2.5, 5, 10, 25, 50, 100, 200 km (except 780nm: 0.5, 1, 2.5km) Multimode: 0.5, 1, 2.5, 5, 10, 25, 50, 100 km

Fault locate: provides end/break location, end to end loss, fiber length Standard OTDR: user selectable automatic or manual set-up Construction OTDR: automated, multi-wavelength testing Light source: stabilized light source (CW, 270Hz, 1kHz, 2kHz output) Loss test set (optional): power meter and light source Visual fault locator (optional): visible red light for fiber identification and troubleshooting IP test (optional): connectivity and throughput for 10/100/1000 MB

General Specifications

Size: 270(W) x 165(H) x 61(D) mm Weight: 2.2 kg (4.8 lbs) including battery Size: 284(W) x 200(H) x 77(D) mm Weight: 2.9 kg (6.4 lbs) including battery

-5

+ marker resolution (excluding IOR uncertainty)

Auto or manual operation, displayed in table format User defined PASS/FAIL thresholds:

Fiber event analysis

OTDR trace format Telcordia universal issue 2 (SR-4731)

Other functions

Environmental conditions

EMC EN61326:1997/A1:1998/A2 : 2003 (Class A, Annex A)

Laser Safety

Notes

Typical, backlight off, sweeping halted at 25oC, 6 hours typical continuous testing

Either high density value is selected depending on distance range

Sampling mode normal. Except models 062, 068 – 1 second or less

- reflective and non-reflective events: 0.01 to 9.99 dB (0.01 dB steps)

- reflectance: 20.0 to 60.0 dB (0.1 dB steps)

- fiber end/break: 1 to 99 dB (1 dB steps) Number of detected events: up to 99 Macrobend detection

Real time sweep*3: 0.15 second Loss modes: 2 point loss, dB/km, 2 point LSA, splice loss, ORL Averaging modes: timed (5 – 180 seconds) Live Fiber detect : verifies presence of communication light in optical fiber( >-40dBm) Connection check: Automatic check of OTDR to FUT connection quality Trace overlay and comparison

Operating temperature and humidity: 0 to +40C,<80%譆non-condensing) Storage temperature and humidity: -20 to +60C, <80% 譆non-condensing) Vibration: Conforming to MIL-T-28800E Class 3

Drop: MIL-T-28800E Style C (20.3 cm corner, surface total 14 times shocks, Power OFF) Dust proof: MIL-T-28800E Class 2

IEC Pub 60825-1:2001 Class:1 model 051, 052, 060, 061, 062 Class:1M model 050 21CFR1040.10 (laser notice no. 50)

OTDR Specifications

Model

Wavelength*4

Fiber Type

Pulsewidth*8 Dynamic Range *5

Deadzone (Fresnel) *6

Deadzone (Backscatter) *7

050 1310+30nm 38.5dB <5m

051 1550+30nm 37dB <5.5m

052 1650+5nm 33.5dB <6.5m

053 1310/1550+30nm 38/36.5dB <5/5.5m

054 1550+30/1650+5nm 36/33.5dB <5.5/6.5m

055

056

057

058

059

1310/1550+ 1650+

1310/1490/1550

30nm

1310/1550/1625

30nm

1310/1490/1550/ 1625+

1310/1550/1625+ m, 1383+

5nm

30nm

2nm

30nm,

30n

Single Mode (SMF)

8-10/125um ITU-T G.652

3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000ns

37.5/36/33.5dB <

36/34.5/34.5dB <

(80 cm typical)

36/34.5/31.5dB <

34/32.5/32.5/

29.5dB

34/32.5/29.5/

33dB

5/5.5/6m

6/6.5/6.5m

6/6.5/7.5m

7/7.5/7.5/8.5m

7/7.5/8.5/7.5m

060 1490+30nm 36.5dB <5.5m

061 1625+30nm

062 780+20nm 8dB (10ns) 1m <7m

780nm: 5, 10ns

068 780+20/1550+30nm

33.5dB

8/36.5dB 1m <

6.5m

7/5.5m

063

1310/1550+

850/1300+

30nm,

30nm

064 850/1300+30nm 28/27dB <4/5m (3/4m typ)

065 850+30nm

Notes

25°C, Pulse width: 1 µs (all except 850, 1300, 780 nm) , 850/1300 nm: 100ns, 780 nm: 10ns

Pulse width: 20 µs (Options 050 to 061, Option 063 1310/1550 nm, Options 068 1550 nm)

HYBRID

(SMF/MMF)

Multimode (MMF)

62.5/125um

Same as

SMF & MMF

3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000ns

38/36.5dB,

28/27dB

28dB

(80 cm typical)

5/5.5m,

4/5m (3/4m typ)

4m (3m typ)

Pulse width: 4 µs (Options 063, 064 1300 nm), Pulse width: 100 ns (Options 063, 065 850 nm)

Pulse width: 10 ns (Options 062, 068 780 nm)

Distance range: 100 km (Options 050 to 061, Option 063 1310/1550 nm, Options 068 1550 nm)

Distance range: 25 km (Option 063 850/1300 nm, Options 064, 065 850/1300 nm)

Distance range: 2.5 km (Option 062, 068 780 µm)

….Averaging: 180 seconds, SNR=1 method, 25°C

Pulse width: 3 ns (Options 050 to 061, 063, 064, 065, Options 068 1550 nm)

Pulse width: 5 ns (Options 062, 068, 780 nm)

Return loss: 40 dB, 25 (Refer to the figure below)

Pulse width 10 ns, return loss 55 dB, Deviation ±0.5 dB, 25°C

1000-4000 ns cannot be selected when wavelength is 850 nm

Loss Test Set Specifications – Standard on all models

Stabilized Light Source

(through OTDR port)

Standard Integrated Power Meter

*10

(through OTDR port)

*13

Item Specification Item Specification

Wavelength Same as OTDR Maximum Input +10 dBm

Spectral Width*9

10nm (1383: <1nm) Measurement Range -50 to -5 dBm

Fiber Type Same as OTDR Fiber Type Same as OTDR

Optical Connector Same as OTDR Optical Connector Same as OTDR

Output Power*9

Output Stability

*11

Modes of Operation

*12

–5 ±1.5 dBm

0.1dB

CW, 270Hz, 1kHz, 2kHz

Laser Safety Same as OTDR

Accuracy

Supported Wavelengths 1310, 1550, 1625 nm plus

*16

+6.5%

* 1490 nm (056, 058, 060)

* 1383 nm (059)

* 1650 nm (050, 051, 053, 054, 055, 057, 061)

Loss Test Set Specifications – Optional on all Models*13

Power meters (003, 004, and 005) and visual light source must be added as separate line items.

Optical Power Meter (Option 003, 004, 005)

Option Number MT9083A-003 MT9083A-004 MT9083A-005

Supported Fiber Type Single Mode: 8-10/125

um (G.652), Multimode:

62.5/125um

Measurement Range

*14

+3 to -70 dBm +23 to -50 dBm +30 to -43 dBm

Single Mode: 8-10/125 um (G.652)

*PC only for UPC connector, angled

only for APC connector*

Wavelength Range 750 to 1700 nm 1200 to 1700 nm

Calibrated Wavelengths 850, 1300, 1310, 1383,

1310, 1383, 1490, 1550, 1625, 1650 nm

1490, 1550, 1625, 1650

Optical Connector Universal – uses

MA9005A adapters

Accuracy

*15

+5%

Universal – uses UNIV-XX adapters

(same as OTDR)

Linearity +3%

Features Store reference, loss table, recognition of modulated light (270Hz, 1kHz, 2kHz)

Visible Light Source (Option 002)

Central wavelength 650 nm ±15 nm (at 25oC)

Optical output

-2 ± 1.5 dBm 譆CW譙

Output optical fiber 8-10/125 µm, SMF (ITU-T G.652)

Optical connector 2.5mm universal

Optical safety IEC Pub 60825-1Class 3R, 21CFR1040.10

Environmental Same as OTDR

Notes

CW, 25oC, SMF or MMF

*10

Light source not available at 780 nm, power meter not available at 780, 850, 1300 or 1650 nm

*11

CW, 0° to 40 (±1) difference between max/min. values over 1 minute, SM fiber

*12

Modulation +1.5% with 10 minute warm up

*13

If option 003, 004 or 005 is ordered, the standard integrated power meter is not available

*14

Peak power, subtract 3 dB for modulated tones

*15

CW, model 003: @-10 dBm 1310 and 1550 nm, model 004/005: @0 dBm

*16

CW input, -20 dBm @ 1550 nm, 23oC

*13

Single Mode: 8-10/125 um

(G.652)

Universal – uses MA9005B

adapters

MT9083A ACCESS MASTER Selection and Ordering Guide

1) Select Model

Includes ACCESS Master OTDR, AC charger/adapter, battery pack (1) and printed user’s manual. Also included are choice of one OTDR connector adapter (two for model 063) and line cord – select these below.

Model/

Order No.

MT9083-050 1310nm, single mode General-purpose model for construction, maintenance and fault location

MT9083-051 1550nm, single mode General-purpose model for construction, maintenance and fault location

MT9083-052 1650nm, single mode In-service measurement – integrated filter to block transmissions

MT9083-053 1310/1550nm, single mode General-purpose model for construction, maintenance and fault location

MT9083-054 1550nm & 1650nm, SM

MT9083-055 1310/1550nm & 1650nm, SM

MT9083-056 1310/1490/1550nm, SM General-purpose plus 1490 nm for FTTx/PON applications

MT9083-057 1310/1550/1625nm, SM General-purpose plus enhanced macrobend detection at 1625 nm

MT9083-058 1310/1490/1550/1625nm, SM General purpose for any application or full spectrum characterization

MT9083-059 1310/1383/1550/1625nm, SM General-purpose plus supports Water Peak testing at 1383 nm

MT9083-060

MT9083-061

MT9083-062

Wavelength Application

General-purpose models for construction, maintenance and fault location plus In-

service measurement – integrated filter to block transmissions

1490nm, single mode FTTx/PON testing

1625nm, single mode Enhanced macrobend detection

780nm, single mode For troubleshooting live FTTx/PON networks

MT9083-068 780 &1550nm, single mode For troubleshooting live FTTx/PON networks plus verification and macrobend

detection on dark fibers

MT9083-063 850/1300 nm (multimode)

1310/1550 nm (single mode)

MT9083-064 850/1300 nm, multimode Multimode fiber model

MT9083-065 850 nm, multimode Multimode fiber model

Best unit for contractors or anyone who installs or maintains hybrid networks

2) Select Line Cord

Line Cord

One line cord included at no charge - must be added as a separate line item

Model/Order Description Model/Order No. Description

MT9083A-US United States line cord MT9083A-AU Australia line cord

MT9083A-UK United Kingdom line cord MT9083A-IT Italy line cord

MT9083A-EU European Union line cord

3) Select OTDR Connector Type

Optical Connector

One adapter included at no charge (two with models 054, 055, 063) - must be added as a separate line item.

Model/Order No. Description Model/Order No. Description

MT9083A-025 FC-APC connector - single mode only

(additional charge applies)

MT9083A-026 SC-APC connector - single mode only

(additional charge applies)

MT9083A-033 LC connector MT9083A-040 SC connector

MT9083A-037 FC connector MT9083A-043 HMS-10/A connector

MT9083A-038 ST connector

MT9083A-039 DIN connector

4) Select Loss Test Set Options

Optical Power Meter

Must be added as separate, chargeable line items.

Model/Order No. Description

MT9083A-003 SMF/GIF Optical Power Meter

MT9083A-004 SMF Optical Power Meter

MT9083A-005 SMF High Power Optical Power Meter

Visible Light Source

Model/Order No. Description

MT9083A-002 Visible Laser Diode

4a) Select Power Meter Connector Type (option -003 or -005 only)

One adapter included at no charge, select from replacement adapter section. Must be added as a separate line item.

5) Select Network Test Options

Network test function

Must be added as separate, chargeable line items.

Model/Order No. Description

MT9083A-001 IP Network Connection Check Function

MT9083A-011 Gigabit Ethernet Upgrade (requires option MT9083A-001)

)

6) Select Accessories & Replacement Items

Accessories

Must be added as separate, chargeable line items.

Model/Order No. Description

MT9083A-010 Protector (includes rubber bumpers, display cover and shoulder strap)

MT9083A-MAN Hardcopy MT9083A operation manual

MT9083A-IPMAN IP network connection check function manual

B0582A Soft carrying case

B0583A Hard carry case for MT9083A - attaché style

B0549 Hard carry case for MT9083A with handle and wheels

Z0921A Replacement battery pack for MT9083A

J1295 Car plug cord

NETWORKS PC emulation software for data analysis and reporting

Peripherals

BL-80R2 Thermal printer kit (must also order BL-100W AC adapter, J1314 printer cable and BL-80-30 paper rolls)

BL-100W AC adapter for BL-80R2 printer

J1314 Printer cable for BL-80R2 printer

BL-80-30 Printer paper for BL-80R2 Thermal Printer (10 rolls/set)

Retrofit Options for existing units – unit must be returned to authorized service center

MT9083A-110 Protector (retrofit)

MT9083A-103 SMF/GIF Optical Power Meter (Retrofit)

MT9083A-104 SMF Optical Power Meter (Retrofit)

MT9083A-105 SMF High Power Optical Power Meter (Retrofit)

MT9083A-102 Visible LD (Retrofit)

MT9083A-101 IP Network Connection Check Function (retrofit)

MT9083A-111 Gigabit Ethernet Upgrade (retrofit - requires option MT9083A-001 or MT9083A-101)

Replacement Adapters

Type

LC UNIV-LC MA9005A-33 MA9005B-33

FC UNIV-FC MA9005A-37 MA9005B-37

Angled FC (AFC) UNIV-AFC N/A N/A

ST UNIV-ST MA9005A-38 MA9005B-38

DIN UNIV-DIN MA9005A-39 MA9005B-39

HMS-10A J0618F MA9005A-43 MA9005B-43

SC UNIV-SC MA9005A-40 MA9005B-40

OTDR/source port/

Power meter (MT9083A-004

Power meter

(MT9083A-003

Power meter

(MT9083A-005

Related Anritsu Products

CMA50 Optical Loss Test Set

All-in-one light source, power meter, visual fault locator and optical return loss meter for optical fiber construction and maintenance. They are offered with common calibration wavelength and connector options to meet any testing requirement from FTTx networks to long haul telephony links to multimode LAN, and CATV.

CMA5 Optical Power Meter and Light Source

The CMA5 Series Power Meters are ideal for attenuation and power throughput measurements on point-to-point fiber optic links. The CMA5 Series Light Sources provide an economical and stable laser source for use in point-to-point attenuation measurement. They feature a rugged design, built to withstand the difficult testing environment of fiber optic cable installation and maintenance.

CMA 5000 Multilayer Testing Platform

The CMA5000 is the industry's premier test and measurement solution featuring Gigabit Ethernet, DWDM, SONET/SDH, OTDR, ORL, PMD and CD applications. Through its open-architecture design, the CMA5000 offers the highest performance measurement applications in one powerful, modular platform.

CMA3000 Mobile and Fixed Access Network Tester

CMA 3000 is designed specifically for field technicians who install and maintain mobile-access and fixed-access networks. The CMA 3000 is a powerful tool for a wide range of applications, including fast first-aid troubleshooting to comprehensive, in-depth and all-layer analysis of transmission problems. The basic CMA 3000 configuration, with its two 2 Mbps receivers and transmitters, supports framed and unframed testing and monitoring of 2 Mbps systems.

Anritsu Corporation

5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan

Phone: +81-46-223-1111

Fax: +81-46-296-1264

• U.S.A.

Anritsu Company

1155 East Collins Blvd., Richardson, TX 75081, U.S.A.

Toll Free: 1-800-ANRITSU (267-4878)

Phone: +1-972-644-1777

Fax: +1-972-671-1877

• Canada

Anritsu Electronics Ltd.

700 Silver Seven Road, Suite 120, Kanata,

Ontario K2V 1C3, Canada

Phone: +1-613-591-2003

Fax: +1-613-591-1006

• Brazil

Anritsu Electrônica Ltda.

Praca Amadeu Amaral, 27 - 1 Andar

01327-010-Paraiso-São Paulo-Brazil

Phone: +55-11-3283-2511

Fax: +55-11-3288-6940

• U.K.

Anritsu EMEA Ltd.

200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K.

Phone: +44-1582-433280

Fax: +44-1582-731303

• France

Anritsu S.A.

9, Avenue du Québec Z.A. de Courtabœuf

91951 Les Ulis Cedex, France

Phone: +33-1-60-92-15-50

Fax: +33-1-64-46-10-65

• Italy

Anritsu S.p.A.

Via Elio Vittorini, 129, 00144 Roma, Italy

Phone: +39-6-509-9711

Fax: +39-6-502-2425

• Sweden

Anritsu AB

Borgafjordsgatan 13, 164 40 KISTA, Sweden

Phone: +46-853470700

Fax: +46-853470730

• Finland

Anritsu AB

Teknobulevardi 3-5, FI-01530 Vantaa, Finland

Phone: +358-20-741-8100

Fax: +358-20-741-8111

• Denmark

Anritsu A/S

Kirkebjerg Allé 90 DK-2605 Brøndby, Denmark

Phone: +45-72112200

Fax: +45-72112210

• United Arab Emirates

Anritsu EMEA Ltd.

Dubai Liaison Office

P O Box 500413 - Dubai Internet City

Al Thuraya Building, Tower 1, Suit 701, 7th Floor

Dubai, United Arab Emirates

Phone: +971-4-3670352

Fax: +971-4-3688460

• Singapore

Anritsu Pte Ltd.

10, Hoe Chiang Road, #07-01/02, Keppel Towers,

Singapore 089315

Phone: +65-6282-2400

Fax: +65-6282-2533

• Germany

Anritsu GmbH

Nemetschek Haus, Konrad-Zuse-Platz 1

81829 München, Germany

Phone: +49 89 442308-0

Fax: +49 89 442308-55

• P.R. China (Hong Kong)

Anritsu Company Ltd.

Suite 923, 9/F., Chinachem Golden Plaza, 77 Mody Road,

Tsimshatsui East, Kowloon, Hong Kong, P.R. China

Phone: +852-2301-4980

Fax: +852-2301-3545

• P.R. China (Beijing)

Anritsu Company Ltd.

Beijing Representative Office

Room 1515, Beijing Fortune Building,

No. 5, Dong-San-Huan Bei Road,

Chao-Yang District, Beijing 10004, P.R. China

Phone: +86-10-6590-9230

Fax: +86-10-6590-9235

• Korea

Anritsu Corporation, Ltd.

8F Hyunjuk Building, 832-41, Yeoksam dong,

Kangnam-ku, Seoul, 135-080, Korea

Phone: +82-2-553-6603

Fax: +82-2-553-6604

• Australia

Anritsu Pty Ltd.

Unit 21 / 270 Ferntree Gully Road,

Notting Hill, Victoria 3168 Australia

Phone: +61-3-9558-8177

Fax: +61-3-9558-8255

• Taiwan

Anritsu Company Inc.

7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan

Phone: +886-2-8751-1816

Fax: +886-2-8751-1817

• India

Anritsu Corporation

India Liaison Office

Unit No. S-3, Second Floor, Esteem Red Cross Bhavan,

No. 26, Race Course Road, Bangalore 560 001, India

Phone: +91-80-32944707

Fax: +91-80-22356648

Atec MT9083A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual