Atec MSURGE User Manual
MSURGE
Magnetic Impulse Field Test System
MSURGE 1mx1m antenna mounted on support stand shown with a monitor
as EUT (right) and a PSURGE6 as impulse generator (left)
To be used for EMC Tests
requiring impulse Magnetic
Fields.
The MSURGE is an accessory to
either the PSURGE 4010 or
PSURGE 8000 with PIM 100
surge generators. It enables
magnetic field testing up to 3000
A/m as required by
IEC 61000-4-9.
The support stand can also be
used for tests in accordance with
IEC 61000-4-8 and
IEC 61000-4-10
ONE SOLUTION
ONE SOLUTION
ONE SOLUTION ONE SOLUTION
for
IEC 61000-4-9
EN 61000-4-9
8x20 Surge
Tester
EUT setup
FEATURES
FEATURES
FEATURESFEATURES
up to 3000A/m field strength
standard coil designed for major application as
defined in the IEC document
sturdy construction
horizontal and vertical testing possible
supplied to ISO 9001
The magnetic field test set MSURGE consists of the
magnetic coil and the connecting cables to the current
surge generator.
EUT
all EN product standards and
many other applications.
BENEFITS
BENEFITS
BENEFITSBENEFITS
software control (when used
together with Haefely EMC
Surge Testers)
single turn coils
only one support stand is
needed for all magnetic field
tests in accordance with
IEC 61000-4-8/9/10
the portable support stand for
the coil is adaptable for all
three magnetic field tests.
MSURGE
MSURGE AUTOMATIC TESTING
MSURGEMSURGE
MSURGE has a 1m x 1m
square, single turn
antenna.
A current of 3600A is
needed to feed the coil to
produce a field of 3000A/m.
AUTOMATIC TESTING LARGE EUTs
AUTOMATIC TESTINGAUTOMATIC TESTING
In conjunction with other
Haefely EMC Test products,
magnetic field testing can be
fully or partially automated.
Any Surge generator can be
used together with the
MSURGE to provide semiautomatic testing from the
instrument front panel.
Voltages can be programmed
which correspond to a
magnetic field strength at the
center of the coil antenna.
WinFEAT&R software used to
Magnetic field strength is
defined at the center of a
coil with ±3dB variation.
Magnetic field is orthogonal
control the Surge
generators, means that
impulse magnetic field
testing can be semiautomatic
with other EMC tests.
to the coil plane. Coil
dimensions define the
maximum EUT size as
being 0.6m x 0.6m x 0.5m.
The MSURGE can be used
for both vertical and
horizontal plane testing, by
simply rotating the coil
antenna in its mounting on
the (optional) stand.
LARGE EUTs
LARGE EUTsLARGE EUTs
The MSURGE is designed for
EUTs up to 0.5m high. To
test larger EUTs, the
antenna coil can be adjusted
in height on the mounting
stand. The MSURGE
construction makes it easy
to adjust the antenna
height.
The MSURGE antenna can
also be rotated through
90° and placed alongside
large EUTs to test all four
faces of the test object.
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATIONTECHNICAL SPECIFICATION
Impulse wave shape
Input to the magnetic
8/20 µs
Maximum EUT size 0.6 x 0.6 x 0.5m
coil
Maximum current 3700 A Load 100 mΩ
Input magnetic coil
Magnetic field
A current of 1200 A
correspond to 1000 A/m
Input High voltage cables
with coaxial plugs
in the center of the coil
Support stand 520 x 800 x 2’050 mm
Weight approx. 14 kg
(W x D x H)
ORDERING INFORMATION
ORDERING INFORMATION
ORDERING INFORMATIONORDERING INFORMATION
MSURGE (1x1m coil antenna) 249 559
Support stand for coil antenna 249 003
WinFEAT&R software 249 970
Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
EMC-sales@haefely.com
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. MSURGE_2006-03-13.doc
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
EMCsales@hubbell-haefely.com
Loading...