Atec MS-60 User Manual

M

M

S

S

●

●

6

6

0

0

High sensitivity portable helium leak detector

-Now with Touch Screen Graphical User Interface

Quickly and accurately detects
leaks for a broad range of
applications

• The Touch-Screen GUI allows
for greater system control and
monitoring during system start­up and operation.

• Displays include system status,
accept/reject status, system
health, setup, calibration and
other diagnostic functions.

• Standard 7 cfm direct drive
foreline/roughing pump for faster
cycle times; optional 10.6 cfm
available

• Internal or external calibration
for flexibility

• Digital Input/Digital Output

• Fully automatic

• Dual magnetic sector high

resolution mass spectrometer

• Three modes of operation

Features:

►5X10

►Two Lanthanum/Yttrium filaments

►Password security

►AZ

-12

atm-cc/sec sensitivity

3

, 3 modes of advanced auto-zero

Applications

-Automotive -High Pressure -Devices

-Compressors -Nuclear Reactors

-Electron Beam –Welders -Power Distribution Plants

-Gas Tanks -Refrigeration Parts

-Heat Exchangers

Benefits:

►Most sensitive portable available

►For longer service life

►Protects against tampering

►Faster, more accurate testing

www.vicleakdetection.com

Vacuum Instrument Corporation

VIC Leak Detection is a registered trademark and the VIC Symbol and the MS-(series) are trademarks of Vacuum Instrument Corporation. © 2008 Vacuum Instrument Corporation.

2099 Ninth Avenue • Ronkonkoma, NY 11779 • T 631 737 0900 • F 631 737 1541 • [e-mail]

MS●60 PERFORMANCE SPECIFICATIONS

Characteristics Units 7 CFM 10.6 CFM

Sensitivity, vacuum *

Sensitivity, sniffing 1.0 x 10-8

Leak Measurement Range

Leak Ranging - Auto/Manual

Start-up time minutes <3

Response Time * seconds <2 direct

Resolution for 4He * - 14

Mass Spectrometer Tube - 180° deflection; dual-magnetic sector

Auto-tuning - Yes

Auto-calibration - Internal – yes; External - manual

Auto-zeroing - Yes, 3 modes: Normal, Spray and Hold

Reject set-point - Yes

Built-in calibrated leak - Yes

NIST traceable - Yes

Temperature compensated - Yes

He Scan - Yes

Filaments - 2 - Lanthanum/Yttrium

Maximum Operating Pressure Torr 7.5, 760 w/ext roughing option

Display - Alpha/Numeric

Units - atm cc/s, mbar*l/s, Pa*M3/sec

I/O -

Digital I/O (PLC interface) - 6-output, 7-input

Printer Port - Yes

RS-232C - Yes

Software - Password security, 3-mode auto-zero

atm-cc/sec

-12

5.0 x 10

0-5V or 0-10V chart; Linear Mantissa and Exponent or Logarithmic LR

and Port Pressure and Foreline Pressure

to 1.0 x 10

VACUUM SYSTEM

Vacuum Mode - Direct, reverse or combination flow

Roughing Pump cfm 7 rotary vane 10.6 rotary vane

High Vacuum Pump liters/second 61 turbomolecular

Vacuum Gauging - Pirani: Test port & foreline; Ion: High vacuum

Test Port Connection - NW25

PHYSICAL

Dimensions (W x H x D) Inches (cm) 21 x 16.9 x 16.5 (53.3 x 42.9 x 41.9)

Weight lbs. (kg) 133 (60.3) 135 (61.2)

ELECTRICAL

Power V/Hz/A 115/50-60/8; 230-240/50-60/5; 100/50-60/8

5.0 x 10

-12

-4

(10 w/ext pump)

Vacuum Instrument Corporation

2099 Ninth Avenue • Ronkonkoma NY 11779 • Tel [phone] • Fax [phone]
www.vicleakdetection.com • email [e-mail]

* Performance determined in accordance with American Vacuum Society Standards; Specifications subject to change without notice.
©2009 Vacuum Instrument Corporation; ®VIC Leak Detection is a registered trademark and the VIC symbol and the MS-(series) are trademarks of Vacuum Instrument Corporation.

REVF090210