Atec MAG100 User Manual
with equipment operated in close
MAG 100
Power Frequency Magnetic Field Test Equipment
To be used for EMC Tests
requiring AC Magnetic Fields
Power frequency magnetic fields
are generated by AC current
flowing in conductors. The
normal 50/60Hz mains power
cord is a good example,
although currents with other
frequencies may be present
dependant on the application.
Magnetic fields, may interfere
MAG 100 current transformer, 1mx1m antenna mounted on support stand
(right) shown with the power source (left)
MAG 100 current transformer, 2mx2.6m antenna mounted on two support
stands
FEATURES
FEATURES
FEATURESFEATURES
up to 110A/m field strength
different coil sizes available
exactly as defined in
IEC 1000-4-8
sturdy construction
horizontal and vertical testing possible
Manufactured according ISO 9001
proximity. Typical EUTs are
monitors of all kinds.
ONE SOLUTION
ONE SOLUTION
ONE SOLUTION ONE SOLUTION
for
IEC 61000-4-8
EN 61000-6-1
EN 61000-6-2
all EN product standards and
many other applications.
BENEFITS
BENEFITS
BENEFITSBENEFITS
software control (when used
together with Haefely EMC
power sources)
single turn coils
MAG 1OO
MAG 1OO AUTOMATIC TESTING
MAG 1OOMAG 1OO
MAG 100 has a 1m x 1m
square, single turn antenna.
A current of 120A is needed
to feed the coil to produce a
field of 100A/m. MAG 100
includes a current
transformer capable of
delivering 120A from a low
current source.
Magnetic field strength is
defined at the center of a
coil with ±3dB variation.
Magnetic field is orthogonal
AUTOMATIC TESTING LARGE EUTs
AUTOMATIC TESTINGAUTOMATIC TESTING
In conjunction with other
Haefely EMC Test products,
magnetic field testing can be
fully or partially automated.
PLINE 1610 used together with
the MAG 100 can provide semi
automatic testing from the
instrument front panel. A
special menu MAG100 is
included in the PLINE 1610
software. Voltages can be
programmed which correspond
to a magnetic field strength at
the center of the coil antenna.
to the coil plane. Coil
dimensions define the
maximum EUT size as being
0.6m x 0.6m x 0.5m.
The MAG 100 can be used
for both vertical and
horizontal plane testing, by
simply rotating the coil
antenna in its mounting on
the (optional) stand.
The MAG 100 can only be
used for continuous mode
testing.
WinFEAT&R software used to
control the PLINE 1610,
means that magnetic field
testing can be automated
with other EMC tests.
LARGE EUTs
LARGE EUTsLARGE EUTs
To satisfy the needs of
manufacturers with test
objects larger than 0.6m x
0.6m, a coil antenna is
available with dimensions
2m x 2.6m.
The increased antenna size
means that objects up of
1.2m x 1.6m can be tested.
However, because the coil
antenna is still used with
the MAG 100 current
transformer, maximum
current in the coil is 120A.
This results in a magnetic
field of only 36A/m at coil
center.
The larger coil antenna
requires two stands to
support it. It can still be
used for both horizontal
and vertical plane testing.
TECHNICAL SPE
TECHNICAL SPECIFICATION
TECHNICAL SPETECHNICAL SPE
Input Voltage range 0 - 230V Maximum EUT size 0.6 x 0.6 x 0.5m
Output Voltage range 0 - 1.2V max field 1m x 1m coil 110 A/m
Output Current range 1 0 - 13A max field 2m x 2.6m coil 36 A/m
Output Current range 2 0 - 130A Input connection 10A IEC
Weight approx. 17 kg
CIFICATION
CIFICATIONCIFICATION
ORDERING INFORMATION
ORDERING INFORMATION
ORDERING INFORMATIONORDERING INFORMATION
MAG100 set with 1m x 1m coil antenna 249004
Support stand for coil antenna 249003
Additional coil antenna 2m x 2.6m 249030
WinFEAT&R software 249970
Headquarters
Haefely Test AG
Lehenmattstrasse 353
CH-4052, Basel
Switzerland
+ 41 61 373 41 11
+ 41 61 373 45 99
EMC-sales@haefely.com
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. MAG100_2006-05-22.doc
Locate your local
sales representative at
www.haefelyEMC.com
North American Office
Hipotronics Inc.
Haefely EMC Division
1650 Route 22
Brewster, NY 10509
++1 845 279 3644 x264
++1 845 279 2467
EMCsales@hubbell-haefely.com
Loading...