Atec CR-121 User Manual
CHROMA METER CR-121
The CR-121 's illuminating system, using 45/0 geometry,
is identical to that used by densitometers in the printing industry,
allowing users to measure color from printed matter and other glossy surfaces.
In addition, its 3mm diameter measuring area enables precise targeting
for spot color readings.
Main features
•
Precise readings with high repeatability
•
Lightweight and battery powered
•
Readings displayed in Yxy or L*a*b* color
space
•
Built-in memory for measuring color difference
•
Choice of calibration standards
•
Choice of two illuminants
•
Efficient, consistent illumination
•
Illumination monitoring system
•
I
nterfacing with
peripheral units
Minolta Data Processor
DP-100
Applications
•
Manufacturing:
Color control of painted and coated surfaces
•
Printing:
Control of color density, ink characteristics, etc.
Illuminating system
Light from the pulsed xenon arc lamp is diffused in the
mixing chamber and projected onto the sample at a
controlled angle of 45°. The light reflected vertically
from the sample is collected by the optical cable and
sent to the silicon photocells for color evaluation.
Specularly reflected light is blocked from reaching the
optical cable, enabling more accurate measurement of
glossy surfaces.
Optical cable to receive
reflected light
Pulsed xenon
arc lamp
Loading...