CP CR500 compensating reactor
Accessory for the CP TD1
The CP CR500 compensating reactor is used together with the
CPC 100 multifunctional primary testing system and the CP TD1 for
testing the insulation quality of rotating machines, cables and other
assets with high capacitances.
For dissipation factor (tan δ) / power factor testing and tip-up
testing several CP CR500 units can be connected in parallel.
Capacitances of up to 1µF (4 A) can be compensated with 12 kV
test voltage and at mains frequency
can also be used as high-voltage source to provide compensation
of up to 2 µF, for example when performing partial discharge
measurements. The frequency can also be varied (15 Hz … 400 Hz)
to facilitate optimum compensation during long-time tests.
Advantages
> Portable: compact dimensions and low weight
> Flexible: can be used as high-voltage source, as well as for
dissipation factor (tan δ) / power factor testing and tip-up testing
> Extendable: several units can be connected in parallel
> Long test times: maximum output duration with optimal compensation by adjusting the frequency
1
(50 Hz / 60 Hz). The system
Specifications
Maximum test voltage 12 kV
2
2 × 40 H 1 × 40 H + 1 × 80 H 2 × 80 H
(≥ 50 Hz)
rms
Inductance 2 × 40 H 1 × 40 H + 1 × 80 H 2 × 80 H
Current compensation 2 × 1 A (50 Hz)
2 × 0.8 A (60 Hz)
Capacitance
compensation
2 × 250 nF (50 Hz)
2 × 180 nF (60 Hz)
1 × 1 A + 1 × 0.5 A (50 Hz)
1 × 0.8 A + 1 × 0.4 A (60 Hz)
1 × 250 nF + 1 × 125 nF (50 Hz)
1 × 180 nF + 1 × 90 nF (60 Hz)
2 × 0.5 A (50 Hz)
2 × 0.4 A (60 Hz)
2 × 125 nF (50 Hz)
2 × 90 nF (60 Hz)
On/off times at 25 ˚C
0.3 A Continuous (> 1 h) Continuous (> 1 h) Continuous (> 1 h)
0.5 A Initial output time: 40 min
On/off times: 6 min/6 min
1 A Initial output time: 7 min
On/off times: 2 min/6 min
Initial output time: 40 min
On/off times: 6 min/6 min
1 × 40 H: see "2 × 40 H"
1 × 80 H: see "2 × 80 H"
Initial output time: 40 min
On/off times: 6 min/6 min
Maximum current is 0.5 A
at 12 kV and 50 Hz
1 × 40 H + 1 × 80 H: see "2 × 40 H"
Dimensions (W × H × D),
455 mm × 275 mm × 220 mm / 17.9 × 10.8 × 8.7 in
with handles
Weight 36 kg / 79.4 lbs
Order No. VEHZ0602 VEHZ0605 VEHZ0604
1
To achieve the best possible compensation at mains frequency, an 80 H reactor should be made available.
2
Specifications with one CP CR500.
OMICRON is an international company serving the electrical power industry with
innovative testing and diagnostic solutions. The application of OMICRON products
allows users to assess the condition of the primary and secondary equipment on
their systems with complete confidence. Services offered in the area of consulting,
commissioning, testing, diagnosis and training make the product range complete.
Customers in more than 140 countries rely on the company’s ability to supply leading
edge technology of excellent quality. Service centers on all continents provide a broad
base of knowledge and extraordinary customer support. All of this together with our
strong network of sales partners is what has made our company a market leader in the
electrical power industry.
© OMICRON L2197, September 2013 • Subject to change without notice www.omicron.at • www.omicronusa.com