Atec CDN3425 User Manual

cDn 3425

Burst/EFt coupling clamp

The CDN 3425 is Teseq’s newly designed Burst EFT coupling clamp.

It replaces the earlier models CDN 8014 and CDN 8015.

The CDN 3425’s main purpose is to couple Burst/EFT pulses to data lines. It can also be used to couple to mains lines where no CDN is available; for example, high current lines >200 A.

New design Complies with IEC 61000-4-4

Ed 2.0 2004

Complies with IEC 61000-4-4

Ed 3.0 2012 Safety cover with interlock Calibration kit per IEC 61000-4-4

Ed 3.0 2012

This new design is fully compliant with the specications of IEC 61000-4-4 Ed 2.0 20 04, as well as with the draft of IEC 61000-4-4 Ed 3.0 to be published in 2012.

An INA 3425 calibration kit as specied in IEC 61000-4-4 Ed 3.0 2012 is available as an option.

An optional INA 3825 safety cover with interlock function to be connected to NSG 3000 series generators is also available.

CDN 3425 with INA 3835 safety cover

Teseq AG Nordstrasse 11F 4542 Luterbach Switzerland

T + 41 32 681 40 4 0 F + 41 32 681 40 48

sales@teseq.com www.teseq.com

Tes eq

is an ISO-registered company. Its products

are designed and manufactured under the strict qualit y and env ironme ntal re quirements of the ISO

9001. This document has b een carefully c hecked. However, Teseq errors or inaccuracies.

691-282A S eptember 2011

does not assum e any liability for