Passive Intermodulation (PIM), the new benchmark in antenna system
health, has become one of the greatest challenges of frequency planners
in today’s mobile communication systems. System planners, equipment
and component vendors alike are faced with the ever changing dynamics
of higher transmit signals, basestation sensitivity and the nonlinear
response of two or more frequency signals causing serious interference
and network signal degradation. With the uncertainty of the root cause of
PIM in any given system, the need to deploy specifi c testing solutions in
a professional, reliable instrument has become paramount in maintaining
the overall antenna health for system providers.
PiMPro has been designed to meet these challenges. Its compact,
portable yet rugged features provide maximum power in a reliable,
fi eld proven design without compromising the accuracy and precision of
intermodulation measurements.
As a leading provider of wireless basestation enhancement products, CCI
set out to design and develop a reliable solution to system performance
and enhancement challenges. PiMPro employs state-of-the-art technology
and is built to meet the demands and needs of today’s wireless suppliers.
By design, the PiMPro Precision Passive Intermod Analyzer provides precise
measurement of the 3rd, 5th, 7th and 9th order of intermodulation of any
system or component under high-power conditions. In addition to passive
intermodulation measurements, the unit will provide VSWR and Return Loss
values. PiMPro can be used to verify the integrity of individual passive
components including connectors, cable assemblies, antennas, fi lters,
making it an integral performance tool in the fi eld and in the lab.
, 5th, 7th and 9th refl ected passive intermodulation of transmission lines, connectors, fi lters and combiners,
jumpers, splitters, tower mounted devices, other passive system components
Alarms Audio & Visual Display
Residual Intermod Level -122 dBm ( -165 dBc at 20 Watts and -168 dBc at 40 Watts)
Receiver Noise Floor - 136 dBm
Display Type 7” TFT Color Touch Screen
Data Storage USB Port and Internal Memory, supports HTML and PDF fi le format
Measurement Modes PIM and Return Loss, Frequency Sweep, PIM vs Time and RX Interference
Power Requirement 90 – 256 V, 50 – 60 Hz
Power Supply 450 VA
Power Test Port 2 variable signals adjustable from 33 – 46 dBm (40 Watts)
Output Accuracy ± 0.2 dB
PIM Measurement Accuracy± 2.0 dB
Directivity > 25 dB
Software Controls Via touch screen display; measurement mode, set-up, test time
Communication Ports USB
Accessories Available
Accessories Included Power Cord, Operation Manual
PiMPro-AK
Accessory Kit
Low PIM Male DIN to Female DIN jumper cable
Low PIM Male DIN to Male DIN jumper cable
3m (10 ft) length
3m (10 ft) length
Low PIM 7–16 DIN Male to Male Adapter
Low PIM 7–16 DIN Female to Female Adapter
Low PIM 7–16 DIN Male to N Female Adapter
Low PIM 7–16 DIN Male to N Male Adapter
Low PIM Termination (Load) with both Male and
Female DIN
Low PIM Standard Verifi cation Source Tool
Low PIM 1.5 m Cable
Low PIM load < -168 dBc
Torque Wrench for 7–16 DIN Connector
Adjustable Wrench
Small 32 mm Wrench for 7–16 DIN
PiMPro Universal
Accessory Kit
PiMPro-AK
t
y
Communication Components Inc. is one of the fastest growing providers of
basestation enhancement products and services. Our innovative solutions
are designed and installed to allow service providers to get the most out
of their basestation investments. With 25 years experience as a wireless
technology service provider, and our worldwide network of manufacturing
and service centers, CCI is poised to deliver the expertise, technology,
and reliability to meet all your basestation enhancement needs. Contact an
area representative today.
Corporate Headquarters
Communication Components Inc.
89 Leuning Street
South Hackensack NJ 07606
United States of America
201-342-3338
201-342-3339 Fax
www.cciproducts.com