Atec BCICF User Manual

p

g

FISCHER CUSTOM COMMUNICATIONS, INC.

CALIBRATION FIXTURE

Injection Probe calibration fixtures are a part of
the test equipment required by most of the Bulk
current Injection Test Procedure Specifications.
The FCC-BCICF-1 Calibration Fixture allows the
user to quickly and easily calibrate the injection

robe prior to performing the compliance testing.
It exceeds DO-160, Section 20 VSWR fixture
requirements for stand-alone injection probe
calibration fixture.
Due to variable circuit impedances or resonances
in cables and cable looms, the calibration fixture is
used to establish the forward power into the
injection probe needed to develop the specified
currents in the system under test.

The FCC-BCICF-1 offers a distinct advantages and benefits.

 Excellent VSWR over a broad bandwidth: <2:1 over the frequency range of
10kHz – 400 MHz when the probe is in fixture.
 Accommodates a wide variety of Bulk Current Injection Probes that operate between

10 kHz – 400 MHz..

FCC-BCICF-1

20603 Earl St., Torrance, CA 90503 · Phone: [phone] Fax [phone] · email: [e-mail]

© Fischer Custom Communications, Inc.
0208DS-FCC-BCICF-1

Calibrated with probe in fixture
Calibrated without probe in fixture

Fischer Custom Communications, Inc.

All ri

hts reserved • Printed in USA