ATEC AV420A, AV370A User Manual

LCD TV Overview and Installation

AC Input Connector

T o input AC power cable from
a power outlet.

15

DVI-D

Connects the DVI cable to the DVI connector on the computer.

4

ANALOG RGB

Connects the VGA signal cable to the VGA connector on the computer.

5

COMPONENT VIDEO INPUT

Jack for connecting the DVD player (or VCR player or Digital TV playback player)
video input connector (for both DVD and DTV).

8

COMPONENT AUDIO INPUT

Jack for connecting the DVD player (or DTV) audio input connector.

9

OPTICAL OUTPUT

Connects to a Digital Audio component.

10

Main Power Button

Press this button to switch the LCD TV main power on/off. (T o use the TV, press this
button to turn the main power on, and press the POWER button on the remote control.)

14

ANT (VHF/UHF) Connector

Connect with an external cable from the external antenna.

12

PC AUDIO INPUT

Connect to the audio-output port of a PC.

6

RS-232C

This is used for connecting a serial cable.

7

N󳢯 O󳢯 T󳢯 E

▶

Either S-Video input signal or Composite
Video input signal can be connected for use.

VIDEO INPUT 1/2(AV 1, 2)

This jack is used for audio/video input from external devices.

11

VIDEO OUT 1

This jack is used for output from the LCD TV video to an external (other) TV.

13

1-7

LCD Display Overview

LCD TV Overview and Installation

Cradle Installation

Place the cradle on a wide, stable, and flat surface.

1

If the cradle has not been assembled, assemble
it as illustrated in the diagram.

2

Lower the LCD panel in the direction of the arrow.

3

N󳢯 O󳢯 T󳢯 E

▶

If installing the LCD panel on the cradle, install the LCD panel before attaching the speakers.

1-8

LCD Display Overview