Page 1
Product Characteristics
LCD Display Overview
Remote Control
Connecting the LCD TV and Peripheral Devices
Page 2
1-2
Product Characteristics
This product is equipped with an LCD panel to provide high-resolution PC mode.
It is a 37"/42" LCD display that allows you to watch two high-resolution video
sources simultaneously.
Automatic Power On/Off
You can preset the power on/off time to have it turned on and off automatically as desired.
It is automatically turned off if there is no input signal for 15 minutes. (TV Mode)
Viewing high resolution video from external devices
You can view high-resolution video by connecting it to a DVD player and Set-Top Receiver
(480p, 480i, 720p, 1080i-compatible) or a PC connector, AV (Composite) jack, S-Video jack,
VGA (RGB) connector, DVI (Digital) connector and Component provided.
Viewing two video sources at the same time with the Picture-in-Picture
(PIP) feature
Using the PIP feature, you can watch two video signals from external devices simultaneously.
●
Viewing two video signals:
Interactive Menu Screen
The interactive menu screen lets you select a menu item to bring up another menu, providing
easy access to the monitor functions.
HDTV-Ready Display
Enables you to view high-definition digital pictures using a DVD player or HDTV set-top
receiver (480p, 480i, 720p, 1080i-compatible).
SWAP
Page 3
1-3
Product Characteristics
LCD TV Overview and Installation
Monitor Function
PC mode resolution supports up to 1600x1200 @ 60Hz. But to get the best picture quality,
adjust the PC graphics card to 1360x768 @ 60Hz.
N O T E
▶▶
PC Mode Resolution
If PC Graphic card is not supportting 1360x768. Please adjust resolution to 1280x768 @ 60Hz or
1024x768 @ 60Hz.
Various Picture/Sound Controls
● Allows you to set the picture and sound settings for a number of different types of program
and viewing and listening conditions.
● Supports SSM (Sound Status Memory) and PSM (Picture Status Memory), facilitating
optimum sound settings for different video modes (TV drama, music, movie, and so on).
Page 4
MENU Button
Displays the main OSD menu. Exits from a sub-menu.
2
SOURCE Button
Displays a menu of all of the available input sources.
(TV, AV 1, 2, 3, Component, DVI and RGB)
3
Front View
LCD Display
Displays the current contents of the display.
1
2
1
7
8
3 64 5
1-4
LCD Display Overview
Page 5
LCD TV Overview and Installation
Channel (▼/▲) Buttons
Press CH (▼) or CH (▲) to change channels. Also used to select the OSD (On Screen
Display) menu.
4
Volume (◀/▶) Buttons
Press the VOL ◀(decrease) or VOL ▶ (increase) to change the volume. Also used to
increase or reduce the values in an OSD menu.
5
Power Indication Lamp/Remote Control Receiver
If the AC adapter is connected, then the red lamp is illuminated. If the LCD Display
power is turned on, then the green light is illuminated. Paint the remote control towards
the Power Indication Lamp to receive the function of the radio wares emitted from the
remate control.
7
External Speakers
Output device for LCD TV sound (for information on installing speakers, see Page 1-9).
8
POWER Button
Press this button in Standby mode to turn off the LCD TV. (Use this button after pressing
the main power button on the rear panel of the LCD TV.)
6
1-5
LCD Display Overview
Page 6
LCD TV Overview and Installation
AV3 : S-VIDEO (AV)
S-Video signal from an S-VHS VCR or Laserdisc player.
2
AV3 : Composite
- Composite Video IN : Connect with the Video input terminal from a VCR (or DVD Player).
- Audio L/R IN : Connect with the Audio-Left/Right from a VCR (or DVD Player).
3
Head Phone Jack
Connects with a headphone.
1
Rear View
1
2
3
14
15
4 5 6 7 10 298
13
N O T E
▶
S-video or composite video input signal can be connected for use. (If both of them are connected, the
input signal connected to S-video is used.)
11 12
1-6
LCD Display Overview
Loading...