Atec ALP-51L User Manual

EM-6871 | Antenna, Loop

Description

The EM-6871 Antenna can be used with any
50 ohm /Receiver/Field Strength Meter to
obtain magnetic field measurements from 30
Hz to 1 MHz.

The EM-6871 Loop Antenna has a balanced
faraday shield that reduces it’s response to
electric fields to an insignificantly small
amount, which results in practically pure
magnetic field measurements.

Specifications

Electrical

Frequency Range: 30Hz – 1 MHz

Impedance: Calibrated for use

into 50 Ohms

Output Connector: Type BNC
(shielded from electric fields)

Mechanical

Outside Diameter: 533 mm (21")

Height: 610 mm (24")

Weight: 0.7 kg (1.5 lbs.)

Applications

The EM-6871 Antenna is particularly well
suited for use in meeting Federal Standards
because they are designed for maximum
sensitivity to the magnetic field in its
respective frequency ranges. Also, this loop
antenna is suited for use in compliance
testing to RE01 and RE101 of MIL-STD-461,
RE04 of MIL-STD-461A, FCC/VDE/CISPR
mandates plus other government standards.

Unless otherwise specified, product is manufactured in

ELECTRO-METRICS | 231 Enterprise Road, Johnstown, New York 12095

tel: [phone] | fax: [phone] | email: [e-mail] | www.electro-metrics.com

Ref: 100501

Specifications subject to change without notice.

Johnstown, NY USA.