ATEC AL151 User Manual

After opening the box, please check to ensure that the following
accessories are provided with the monitor
(Option) Pivot Software
U s e r ’s Guide
D-Sub Signal Cable
(Option) USB
C a b l e
Power Cord
The actual monitor and accessories may appear diff e r e n t l y
from those shown on the above figure.
B e fo re Use
F e a t u r e s
Instructions for Safety
1
2
H ow do I Use the Monitor ?
How do I Connect the Computer Cables ?
How do I Connect with the IBM computer ?
The Name and Function of Each Individual Part
Front view Back view The name and function of each individual part in the screen adjusting block
How to Select and Adjust the OSD (On Screen Display)
To adjust the brightness and contrast of the screen ? To select / adjust the color of the screen ? To adjust the up/down/left/right position of the screen ? To adjust the horizontal size of the screen or focus the phase? To get information on the current mode ?
6
7
9
I n fo rm ation for Your Conve n i e n c e
T r o u b l e s h o o t i n g
Product Specification
Please keep the user ’s guide in a place where product users can refer to it.
12
15
1 5 . 1”LCD Panel Adopted
-Adopted the 15.1”LCD (Liquid Crystal Display) Panel which allows you efficient use in a small space due to the slim design.
A Dynamic Convenient Design
-Uses a specially manufactured hinge (ATEC System patent) to adjust the screen freely up and down, left to right, and back and forth. This function is provided with thoughtful consideration to the user’s convenience.
Plug & Play Function
-The Plug & Play function is available, freeing the user from having to reboot or set up the system during operation.
-The user does not have to adjust the monitor to computer connection, as optimal screen settings are automatically provided through the DDC (Display Data Channel) system.
Power Consumption Economy Function
- The VESA DPMS (Display Power Management Signaling) function is available to reduce power consumption by automatically switching the computer into the power saving mode if the system doesn’t operate for a fixed period of time.
AUDIO Function
- A speaker is embedded so that the user can hear sound without separate s p e a k e r s .
E M I / E M S
- This equipment has been registered through compatability tests with electromagnetic waves, and can therefore be used everywhere including residential districts.
O P T I O N
- Software pivoting to the vertical size of A4 paper is available, making Word work easier.
- USB 4Port can be embedded to use the USB without an external Hub.
Matters that demand special attention are divided into
FCC INFORMATION TO THE USER Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
W a r n i n gand ‘C a u t i o n, and are detailed a follows
Wa rn i n g
In case of the possibility that a serious injury or death may occur during a violation of the instructions.
C a u t i o n
In case of the possibility that a slight injury or product
damage may occur during a violation of the instructions.
Wa rn i n g
The sign on the product
and user ’s guide instructs as following.
A sign signifies the
need for particular atten­tion in order to avert potential danger under certain conditions.
No one but trained repair engineers may disassemble the monitor. Please contact the appropriate sales agency or cus­tomer counsel window for check-ups, adjustment and repair.
A fire or electric shock accident may be caused.
D o n’t place or drop metals (such as coins, hair pins, or ironware) or flammable items (such as paper, or matches) onto the m o n i t o r .
A fire or electric shock accident may be caused.
Please note not to allow liquids such as chemicals, water etc to contact the monitor.
A fire or electric shock accident may be caused.
D o n’t place the monitor near to heat sources (such as a fireplace), and keep out of the sun.
A fire or electric shock accident may be caused.
Wa rn i n g
Please be careful to keep the panel from being scratched or damaged when you transport the monitor.
The panel may be damaged, causing a failure.
D o n’t set up the equipment in a humid environment (such as bathroom, rainy or windy area, e t c ) .
Accidents of electric shock, fire or failure may occur.
D o n’t sprinkle water directly on any part of the monitor body.
Please insert the two pins of the plug completely so that the power supply unit can be connected tightly.
Unsafe power connections may cause a fire.
Please stop using in case of smoke or abnormal odors. Immediately switch off the power, and pull out the power cord from the wall. Contact the service center.
Continuity of use in such a state may cause a fire or electric shock.
Please keep the power cord from proximity to a heating instrument.
An electric shock or fire accident may occur.
The covering material of the cord may melt, causing a fire or electric s h o c k .
Wa rn i n g
Never touch the power plug with wet hands.
An electric shock accident may occur.
Please set up the monitor at a proper distance (over 10 cm) away from the wall for sufficient ventilation.
A fire may be caused due to an increase in internal tempe­r a t u r e .
Please note that air-flow holes must not be blocked by a table cloth or curtain.
A fire may becaused due to an increase
in internal tempe­r a t u r e .
D o n’t use a power cord or plug that is damaged or has a loose connection.
An electric shock or ignition may be caused.
Please grasp the power plug at the base to remove it from the wall, and pull firmly but gently.
If you yank at the cord
the wire may be broken,
causing ignition or heat generation.
D o n’t set up the equipment on an unsupported shelf or angled surface. nor on an area subject to serious vibration.
Fall or displacement of the equipment may cause an injury.
Wa rn i n g
You must switch the power off and pull the power cord out before moving the monitor. You should also check as to whether external connection cords - such as the connection cords between compo­nent parts - are all pulled out before the m o v e m e n t .
A damaged cord may cause a fire or electric shock.
D o n’t set the monitor in a narrow place with poor ventilation such as a bookcase
A fire may be caused due to an increase in internal temperature.
C a u t i o n
Pull the power cord out when the monitor is not used for a long time, or while you are away.
A dust covering may cause an electric shock, electric leakage, or fire by heat generation, ignition, and insulation degradation.
When you clean the panel surface, pull the power cord out first, and wipe the surface with a clean, dry and soft cloth. Don’t use a damp cloth.
Such action may be the main cause of an electric shock accident and failure.
D o n’t put pressure upon the panel or score the surface with your hands or sharp items (nails, pencils, pens, etc).
Damage or failure of the panel may be caused.
When you move the monitor, take hold of it with both hands setting the panel forward.
If you drop the monitor, contact the service center to check it for a susceptibility to fire or electric shock.
How do I connect the computer cables?
How do I connect with the IBM computer ?
1 .
2 .
3 .
4 .
5 . 6 .
Ensure that the computer, monitor and peripheral equipment power is turned off.
Connect signal cables with the D-sub signal input connector and the monitor signal input connector respectively.
Connect one DC power jack of DC power supply unit to the 12V terminal, and the other to the power cord. Next connect the power cord to the concent.
Turn the monitor power on after switching the computer power on.. If the message “No Signal”appears, check connections of the
signal input cable or connector. Switch the monitor and computer power off at the end of use.
No signal message
If the signal input cable between the monitor and computer isn ’t correctly connected, this message will be displayed on the screen. For more information, please refer to ‘T r o u b l e s h o o t i n g’.
Attention for the use of 110V
If a consumer, lives in a district where the 220V power supply is unavailable, a 110V adapter can be used. Purchase a stan­dard product rated above 15A and 250V with the mark of
K S”or “C h u n”(in Korean) in
a sales agency specializing in electric parts. Using a non
-standard product may cause an electric shock accident.
Power Cord
D-Sub Signal Cable
DC Power Supply Unit
The Name and Function of Each Individual Part
Front View
Back View
Power Button
UP/DOWN Button
SELECT Button
MENU Button
Power Pilot Lamp
The Name and Function of Each Individual Part
The Name and Function of Each Individual Part in the Screen Adjusting Block
Power Pilot Lamp
Lights up during the opera tion but goes out if you turn the power off.
Power Button
Depressing the button turns the power on but pressing it once more turns it off.
AUTO Function
If you select the SELECT button before using the OSD menu, the screen is automatically adjusted to the optimal display state applicable to the current mode, while the following message appears.
Monitor Side View
UP/DOWN Button
Used to select an icon from the OSD menu screen or adjust the screen.
SELECT Button
Used to select an icon to be adjusted or the AUTO func- tion from the OSD screen.
MENU Button
By pressing this button, the OSD (On Screen Display) menu screen appears or disappears.
If you don ’t like the auto adjustment, you have to manually adjust the H/V Position, Clock, and Phase of the OSD menus. (For more information, please refer to pages 9 - 11.)
How to Select and Adjust the OSD (On Screen Display) Screen
Use the OSD adjustable buttons on the front of the monitor to set/adjust to the best screen and operating environment.
If you have to adjust the screen,
please adhere to the following procedure.
Press the MENU buttonwhich displays the OSD menu screen. Select the icon you desire by pressing the UP/ DOWN button . Then press the SELECT button. Adjust the screen with the UP/DOWN buttons. Save the adjustment by pressing the SELECT button. The OSD menu screen disappears after pressing the MENU button.
How to Select and Adjust the OSD (On Screen Display)
Descriptions of OSD adjustment and functions
To adjust the brightness and contrast of the screen?
B r i g h t n e s s
Adjusts the brightness of the screen. Pressing the button darkens the background screen. Pressing the button brightens the background screen.
C o n t r a s t
Adjusts the contrast of the screen. Pressing the button darkens a screen picture. Pressing the button brightens a screen picture.
To select/adjust the color of the screen? (9300K, 6500K, user definition etc)
F a c t o r y - s p e c i f i e d
Red G r e e n B l u e
Select a screen color as desired by selecting one of the two temperature options.
- 9300K: Selects the bluish s c r e e n .
- 6500K: Selects the reddish screen.
Red, Green, or Blue is optionally variable to select/adjust the color concentration of the background s c r e e n .
How to Select and Adjust the OSD (On Screen Display)
Descriptions of OSD Adjustment and Functions
To adjust the up/down/left/right position of the screen?
Moves the screen up and down.
Moves the screen left and right.
To adjust the horizontal size of the screen or focus the phase?
H o r i z o n t a l S i z e ( C L O C K )
F o c u s ( P H A S E )
Adjusts the horizontal size of the screen by increasing / dec­reasing the number of pixels. Please adjust the display to the Full Screen size.
Brings the phase into focus. This function is used if noise or overlapped letters trouble nor­mal screen functions. You are advised to use the function after adjusting the Horizontal Size ( C L O C K ) .
To get information on the current mode?
I N F O R M A T I O N
Informs you of the horizo­ntal / vertical frequencies in the current mode.
Troubleshooting. Please read before notifying our repair officers of a failure
Please check the below particulars before you contact the service center to notify an abnormality of the monitor.
Is the monitor power cord insert­ed ?
Is the power turned off ? Is the power turned on with the
power pilot lamp lit green? Is the power turned on with the
power pilot lamp lit orange ?
Is the message “Out Of Range” shown ?
Take these respective actionsCheck these points
Please connect the power cord correctly to the concent.
Please press the power button. Please adjust the brightness ( )
and contrast ( )again.
The monitor is in the power saving mode. Please therefore move the mouse or press any key on the keyboard.
The frequency of PC (Video Card) is out of range (i.e., horizontal: 31-60KHz, vertical: 56-75KHz). Please therefore see [Product Specification] in this guide to reset it in conformity with monitor s p e c i f i c a t i o n s .
This symptom can be discovered
The screen doesn’t show anything.
Is the message “No Signal s h o w n ?
The signal cable isn’t connected between PC and monitor, or is missing. Please check and connect it properly.
Troubleshooting. Please read before notifying our repair officers of a failure
Take these actionsCheck these points
This symptom can
be discovered
The color of the screen is not normal
Has a discoloration (into 16 colors) of the screen occurred?
Is the screen color unstable or does it seem to be a single c o l o r ?
Do you see a spot on the s c r e e n ?
Set the number of colors to more than 256 colors. On the Windows 95/98, perform the following process [Control Panel] -> [Display] -> [Setting] -> [Color Table] -> [256 Colors] -> [OK]
Check the connection of the signal cable, and correct it if anyabnormality is found.If you selected “C o m p o s i t e”for the monitor input signal during the PC operation, the screen may be seem abnormal. In such a case, you are recommended to select “S e p a r a t e”which is the default option.
You may see a few spots (in red, green, white, and black) on the screen during the operation. Occurrence of such a phenome­non is not a failure but a charac­teristic of the LCD panel, and therefore has no relation to the performance of the monitor.
Troubleshooting. Please read before notifying our repair officers of a failure
Is the positional adjustment made correctly?
Is the phase adjustment made p r o p e r l y ?
Is the screen set in the best state?
Take these actionsCheck these points
Selecting the SELECT button automatically adjusts the screen in the best state applicable to the current mode. If you are not satisfied with the auto adjustment, you can directly adjust the H Position (Horizontal Position), V Position (Vertical Position), and Clock (Horizontal Size) of the OSD menus.
Selecting the SELECT button automatically adjusts the screen in to the optimal state applicable to the current mode. If you are not satisfied with the auto adjustment, you may manu­ally adjust the Phase (Focus) of the OSD menus.
While you are using this product in the mode of 1024X768 and 60Hz, the best condition of the screen is available. In the mode of VGA(640x480) or SVGA(800x600), the outline of a letter may be seen dimly or u n e v e n l y .
These symptoms
can be discovered
The screen is under a bias toward one side, or is not centrally positioned.
A faint letter is shown, or the phase is out of focus. Noise is also generated horizontally.
Product Specification
The details of product specification can be changed without notice to improve the product.
LCD Panel
P i c t u r e
S i g n a l
A U D I O
I n p u t
C o n n e c t o r
Dimension
and We i g h t
panel type screen size pixel size contrast color resolution brightness
horizontal frequency vertical frequency view angle input picture signal
output input terminal
u s e r’s control
body size(WxDxH) weight
a-Si active matrix TFT-LCD 1 5 . 1”(38cm) diagonal
0.3mm x 0.3mm 3 0 0 : 1 ( T y p i c a l ) 8-bit(16,777,216 Colors) XGA 1024 x 768
2
2 5 0 c d / m 2 ( T y p i c a l )
31.5 - 60kHz 56 - 75Hz U / D :±6 0”, R/L: ±7 5” Analog RGB
1W x 2 on the stand cover 15Pin D-Sub
Auto Configuration, Brightness, Contrast, H-Position, V-Position, Color RGB, Clock Adjustment, Phase Adjustment
387 x 215 x 355mm
7.2kg(Unit), 8.3kg(Packed)
P o w e r
O p t i o n s
power managing system power consumption input power
USB 4Port, Pivot Software
VESA DPMS standard <30 Watt AC 110-220V, 50-60Hz
Product Specification
Factory-specified Mode
1 2 3 4 5 6 7 8
9 1 0 1 1 1 2 1 3 1 4
Factory-specified Mode
V G A
M A C V E S A V E S A V E S A
V G A V E S A V E S A V E S A V E S A
M A C V E S A V E S A V E S A
640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600
832 x 624 1024 x 768 1024 x 768 1024 x 768
Horizontal
F r e q u e n c y ( k H z )
3 1 . 4 7 3 5 . 0 0 3 1 . 4 7 3 7 . 8 6 3 7 . 5 0 3 1 . 4 7 3 5 . 1 6 3 7 . 8 8 4 8 . 6 8 4 6 . 8 8 4 9 . 7 3 4 8 . 3 6 5 6 . 4 8 6 0 . 0 2
Vertical
F r e q u e n c y ( H z )
7 0 6 7 6 0 7 2 7 5 7 0 5 6 6 0 7 2 7 5 7 5 6 0 7 0 7 5
Loading...