Atec AEMC-PEL103 User Manual

POWER & ENERGY LOGGER

PEL 100 Series

Models PEL 102 & PEL 103

ETHERNET

FEATURES

•

Simple to use, single-, dual- (split-phase) and three-phase (Y, ∆) power & energy loggers

•

Provides all the necessary functions for Power and Energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems

•

Current measurements from 200mA up to 10,000A using flexible current sensors

•

Automatic recognition of the connected current sensors/probes

•

Power measurements: VA, W and var

•

Energy measurements VAh, Wh (source/load indication) and varh (including quadrant indication)

•

Record cost of energy usage

• Power Factor (PF), Cos (ϕ), Tan (Φ) and DPF

• Total Harmonic Distortion (THD) for voltages

and currents

•

Harmonics up to the 50th order for 50/60Hz voltages and currents and 7th order for 400Hz

•

Simultaneous RMS measurements of each phase @ 128 samples/cycle and DC

•

Bright blue, four line LCD on Model PEL 103 (3 phases shown simultaneously)

• Storage of measured and calculated values

on a SD-Card or SDHC-Card

• Configuration of current and voltage ratios

to external PT and CT ratios

• USB, LAN, and Bluetooth communication

• Includes DataView® software for data

storage, real-time display, analysis and report generation with supplied pre-defined or custom templates

NEW!

Economical, compact and

simple to use!

KEy FEATURES oF ThE pEl 103 diSplAy

Measured Phase Indicator

Information Display Bar

Bargraph (Load factor Min - Max). The bargraph indicates the percentage (0% to 100%) of full range or full load as programmed into the PEL by the user through the

DataView

Mode Selection Display Bar

software.

Measurements or Page Title

Top And BoTTom diSplAy BARS indicATE ThE Following

TOP DISPLAY BAR

ICON DESCRIPTION

Phase Sequence reversal indicator or missing phase (displayed in 3-Phase distribution systems)

Data available for recording (non-display indicates possible internal problem)

Power Quadrant Indication

BOTTOM DISPLAY BAR

Measurement Mode (Real-time values)

Power and Energy Mode

Harmonics Mode

Min/Max Mode

Information Mode

Not used

pRodUcT inclUdES

Models PEL 102 & PEL 103

Models PEL 102 and PEL 103 include:

Small Classic Tool Bag, Three MiniFlex

MA193-10-BK Sensors (included with select

models), 5 ft USB Cable, Four Black Test Leads

and Alligator Clips, Power Cord, 12 Color-coded

ID Markers, Multifix Mounting System, Safety

Card for the PEL, Sensor Compliance Sheet, 2

GB SD-Card with USB-SD-Card Reader,

Quick Start User Guide and USB Stick

with DataView

Measurement Values

Measurement

Units

and User Manual.

Technical Assistance (800) 343-1391 www.aemc.com

POWER & ENERGY LOGGER

PEL 100 Series

SpEciFicATionS

GENERAL

Sampling Frequency Data Storage Rate Demand Period Storage Rate Recorded Parameters (Single- and Poly-Phase) Event Log Front Panel Indicator LEDs Storage Capacity INPUTS Voltage

Current

ELECTRICAL

VOLTAGE MEASUREMENT RANGE RESOLUTION * ACCURACY (% of Reading)

50/60Hz Single-Phase RMS Voltages Phase-to-Phase RMS Voltages

400Hz Single-Phase RMS Voltages Phase-to-Phase RMS Voltages

DC PT Ratios CURRENT MEASUREMENT Current Probe: MiniFlex

CT Ratios POWER MEASUREMENTS Active Power (P)* Reactive Power (Q)* Apparent Power (S)* Power Factor Tangent φ (active/reactive power ratio) ENERGY MEASUREMENTS Active Energy (EP) Reactive Energy (EQ) Apparent Energy (ES) THD Individual Harmonics External Supply Back-Up Power Source / Charge Time Battery Life

MECHANICAL

Communication Ports Dimension/Weight

Case / Index of Protection

Mounting / Security

DISPLAY

Display Type for Model PEL 103

ENVIRONMENTAL / SAFETY

Operating Temperature / Relative Humidity Storage Temperature Safety Rating / CE Rating

* Maximum value is current probe dependent. ** Computers with Class II Bluetooth will restrict range to 40ft. Computers without Bluetooth will require a Class I or Class II Bluetooth radio adapter.

*** Maximum current reduced by a factor of 2 for 400Hz fundamental frequency.

Sensor MA193***

Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status

2GB SD card (included) is used for storage. SD cards (up to 2GB); SDHC cards (4 to 32GB) formatted FAT32 are supported

42.5 to 69Hz

100 to 1000rms 0.1V ±0.2% Rdg ± 0.2V

100 to 2000Vrms 0.1 to 1V ±0.2% Rdg ± 0.4V

340 to 460Hz

100 to 600Vrms 0.1V ±1% Rdg ± 1V

200 to 1200Vrms 0.1 to 1V ±1% Rdg ± 1V

100 to 1000V 0.1V ±1% Rdg ± 3V (typical)

Programmable from 50V to 65,0000V 0.01V to 0.1V

200mA to 100Arms 1 to 100mA ±1% ± 50mA

20 to 400Arms 10 to 100mA ±1% ± 0.2A

100 to 2000Arms 0.1 to 1A ±1% ± 1A

500 to 10,000Arms 0.1 to 1A ±1%

Complies with IEC 61010-1:Ed3, and IEC 61010-2-030:Ed1 for 1000V CAT III / 600V CAT IV, Pollution Degree 2 / Yes

Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF

Tracks and records status changes and error messages along with recorded data

3 current input channels via custom 4 pin jacks that accept AEMC® probes and sensors

-2 to 2GW 0.001W ±0.5% Rdg ± 0.005% Pnom

-2 to 2Gvar 0.001var ±1% Rdg ± 0.01% Qnom 0 to 2GVA 0.001VA ±0.5% Rdg ± 0.005% Snom

-1 to +1 0.001 ± 0.05

-3.2 to +3.2 0.001 ± 0.02

0 to 4 x 10 0 to 4 x 10 0 to 4 x 10

2.63 x 2.16" (67 x 55mm), four line, monochrome, backlit LCD with adjustable brightness and contrast

Double insulated, rubber over-molded, polycarbonate UL94 V1 rated / IP54 non operating

Embedded magnets on back side, keyhole slot on back side / Kensington anti-theft system

-4° to 122°F (-20° to 50°C) with batteries; -4° to 158°F (-20° to 70°C without batteries)

128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz)

1 per second

User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes)

V, I, W, VA, var, PF, Tan, Wh, Vah, varh, THD (V and I),

3 voltage input channels via 4mm safety banana jacks

Programmable from 1:1 to 25,000:1 (probe dependent)

1varh ±2% Rdg

± 655%

1 to 50 displayed in percentage; 1 to 7 at 400Hz

110V/250V (10%) @ 50/60Hz; 400Hz

Rechargeable 8.4V NiMH battery pack / Approximately 5 hours

Provides up to 30 minute ride through upon power loss

USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 **

10.08 x 4.92 x 1.46" (256 x 125 x 37mm) / <1kg

32° to 122°F (0° to 50°C) / up to 85%

Models PEL 102 & PEL 103

–

– –

1Wh ±0.5% Rdg

1Vah ±0.5% Rdg

±0.1Hz

–

CATALOG NO. DESCRIPTION

2137.51 Power & Energy Logger Model PEL 102 (no LCD, w3 MA193-10-BK sensors)

2137.52 Power & Energy Logger Model PEL 103 (with LCD, w3 MA193-10-BK sensors)

2137.61 Power & Energy Logger Model PEL 102 (no LCD, no sensors)

2137.62 Power & Energy Logger Model PEL 103 (with LCD, no sensors)

Technical Assistance (800) 343-1391 www.aemc.com