Asus V2Je User Manual

Notebook PC

E

X

P

R

E

S

Hardware User’s Manual

E2877b / Nov 2006

Contents

Modem Connection �� 55 Network Connection ��56 Wireless LAN Connection (on selected models) ��57 Intel PROSet (3945) Wireless LAN (on selected models) �� 58 ASUS Wireless LAN (on selected models) �� 59 Windows Wireless Network Connection �� 60 Bluetooth Wireless Connection (on selected models) �� 61 Trusted Platform Module (TPM) (on selected models) �� 62

(continued on next page)

3

Contents

Table of Contents (cont.)

Power Management Modes�� 67

Full Power Mode & Maximum Performance �� 67 ACPI��67 Suspend Mode �� 67 Power Savings �� 67 Power State Summary �� 68 Thermal Power Control �� 68 Stand by and Hibernate �� 69

Fingerprint Scanner �� 70

Fingerprint Login �� 71 SIM and Memory Card Installation �� 72 3G Watcher Software �� 73

Appendix

Optional Accessories ��78 Glossary ��82 Declarations and Safety Statements �� 86 Notebook PC Information �� 96

4

1. Introducing the Notebook PC

About This User’s Manual

Notes For This Manual

Safety Precautions

Preparing your Notebook PC

5

1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:

1. Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2. Knowing the Parts Gives you information on the Notebook PC’s components.

3. Getting Started

Gives you information on getting started with the Notebook PC.

4. Using the Notebook PC Gives you information on using the Notebook PC’s components.

5. Appendix Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:

NOTE: Tips and information for special situations.

TIP: Tips and useful information for completing tasks.

IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons.

WARNING! Important information that must be followed for safe operation.

< >

Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.

[ ]

6

Introducing the Notebook PC 1

Safety Precautions

The following safety precautions will increase the life of the Notebook PC. Follow all precautions and

instructions. Except as described in this manual, refer all servicing to qualied personnel. Do not use

damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,

benzene, or other chemicals on or near the surface.

IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT press or touch the display

panel. Do not place together with

DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.

DO NOT expose to strong magnetic

or electrical elds.

small items that may scratch or enter the Notebook PC.

DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.

DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.

SAFE TEMP: This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)

DO NOT throw the Notebook PC in municipal waste. Check local regulations for disposal of electronic products.

Models with 3G

(1)

: Produces radio wave emissions that may cause electrical interferences

DO NOT expose to or use near liquids,

rain, or moisture. DO NOT use the modem during an electrical storm.

Battery safety warning: DO NOT throw the battery in re. DO NOT short circuit the contacts. DO NOT disassemble the battery.

INPUT RATING: Refer to the rating

label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.

DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

and must be used in places that do not prohibit such devices. Take precautions while using.

WARNING! The 3G function needs to be switched OFF in areas with potentially explosive atmospheres such as petrol (gas) stations, chemical storage depots, and blasting operations.

(1)

(See Appendix for denition)

7

1 Introducing the Notebook PC

Transportation Precautions

To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned

OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.

CAUTION: The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.

Cover Your Notebook PC

Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.

Charge Your Batteries

If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.

Airplane Precautions

Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restrictions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.

CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.

8

Introducing the Notebook PC 1

2

1

3

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed informa-

tion on using your Notebook PC.

1. Install the battery pack

2. Connect the AC Power Adapter

3. Open the Display Panel 4. Turn ON the Notebook PC

IMPORTANT! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!

Press the power button and release.

(In Windows XP, this button can also be used to safely turn OFF the Notebook PC.)

9

1 Introducing the Notebook PC

10

2. Knowing the Parts

Basic sides of the Notebook PC

NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.

11

2 Knowing the Parts

4

5

7

9

1

2

3

6

8

10

Top Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The keyboard will be different for each territory.

12

(continued on next page)

Knowing the Parts 2

2

3

4

5

617

8

9

10

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

Camera Indicator

The camera indicator shows when the built-in camera is in use. The camera may be auto-activated

by supported software.

Multi-Position Camera (on selected models)

The built-in camera allows picture taking or video recording. Can be used with

video conferencing and other interactive applications. CAUTION: The camera

can be adjusted facing forward or facing backward but can only ip through

the bottom. Do not rotate the camera upward past 35 degrees.

Display Panel

The display panel functions the same as a desktop monitor. The Notebook PC uses an

active matrix TFT LCD, which provides excellent viewing like that of desktop monitors.

Unlike desktop monitors, the LCD panel does not produce any radiation or ickering,

so it is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if

necessary) to clean the display panel.

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

Instant Keys

Instant keys allow you to launch frequently used applications with one push of a button.

Details are described in section 3.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys

can be depressed) and palm rest for both hands. Two Windows function keys are provided

to help ease navigation in the Windows operating system.

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a

desktop mouse. A software-controlled scrolling function is available after setting up the

included touchpad utility to allow easy Windows or web navigation.

Fingerprint Scanner

The ngerprint scanner allows use of security software using your ngerprint as your iden-

tication key.

Status Indicators (front)

Status indicators represent various hardware/software conditions. See indicator details in section 3.

13

2 Knowing the Parts

1

1 2 3

4

5

7

8

6

Bottom Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

NOTE: The bottom side may vary in appearance depending on model.

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.

Battery Lock - Spring

The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

14

(continued on next page)

Knowing the Parts 2

2

3

4

8

6

7

5

7

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage

and by the specications for this Notebook PC. The battery pack cannot be disassembled

and must be purchased as a single unit.

Battery Lock - Manual

The manual battery lock is used to keep the battery pack secured. Move the manual lock to the

unlocked position to insert or remove the battery pack. Move the manual lock to the locked

position after inserting the battery pack.

Central Processor Unit (CPU) Compartment

Some Notebook PC models feature a socketed-processor design to allow upgrading to faster processors in the future. Some models feature a ULV design for compactness and may not be upgraded. Visit an authorized service center or retailer for information on upgrades.

WARNING! End-user removal of the CPU or hard disk drive will void the warranty.

Hard Disk Drive Compartment

The hard disk drive is secured in a compartment. Hard disk drive upgrades are to be done

by authorized service centers or dealers only.

Shutdown Button (Emergency)

In case your operating system cannot properly turn OFF or restart, the shutdown button

can be pressed with a straightened paper clip to shutdown the Notebook PC.

Memory (RAM) Compartment

The memory compartment provides expansion capabilities for additional memory. Addi-

tional memory will increase application performance by decreasing hard disk access. The

BIOS automatically detects the amount of memory in the system and congures CMOS

accordingly during the POST (Power-On-Self-Test) process. There is no hardware or

software (including BIOS) setup required after the memory is installed. Visit an authorized service center

or retailer for information on memory upgrades for your Notebook PC. Only purchase expansion modules

from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.

SIM Card Compartment (on selected models)

The SIM card compartment allows insertion of a mobile SIM card for 3G functions.

Power Station Connector

The power station connector allows the Notebook PC to interface with the optional

power station.

15

2 Knowing the Parts

2

3

1

4

EXPRE SS

2 4 5 6 7 8 9 10 111 3

5

Right Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant de-

vices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

Combo

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

ExpressCard Slot

One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

Flash Memory Slot

Normally a PCMCIA or USB memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC has a built-in memory card reader that can read

many ash memory cards as specied later in this manual. The built-in memory card reader is

not only convenient, but also faster than most other forms of memory card readers because it utilizes the high-bandwidth PCI bus.

Optical Drive Activity Indicator (location varies by model)

The optical drive activity indicator shows when data is being transferred by the optical disk drive. This indicator will light in proportion to the data size transferred.

16

(continued on next page)

Knowing the Parts 2

6

7

2.0

8

9

10

11

Optical Drive Electronic Eject

The optical drive eject has an electronic eject button for opening the tray. You can also eject

the optical drive tray through any software player or by right clicking the optical drive in

Windows “My Computer.”

Optical Drive Emergency Eject (location varies by model)

The emergency eject is used to eject the optical drive tray in case the electronic eject does

not work. Do not use the emergency eject in place of the electronic eject.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

Modem Port

The RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports a standard telephone cable. The internal modem supports up to 56K V.90 transfers. The

built-in connector allows convenient use without additional adapters.

IMPORTANT! The built-in modem does not support the voltage used in digital phone systems. Do not connect the modem port to a digital phone system or else damage will occur to the Notebook PC.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices

such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners

connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB

allows many devices to run simultaneously on a single computer, with some peripherals

acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most

peripherals can be connected or disconnected without restarting the computer.

IEEE1394 Port

IEEE1394 is a high speed serial bus like SCSI but has simple connections and hotplugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in

high-end digital equipment and should be marked “DV” for Digital Video port.

17

2 Knowing the Parts

2

3

415

µ

-DVI

1 2 3 4 5

2.0

Left Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Air Vents

The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating of the Notebook PC may occur.

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor

or projector to allow viewing on a larger external display.

TV-Out Port

The TV-Out port is an S-Video connector that allows routing the Notebook PC’s display to a television or video projection device. You can choose between simultaneously or single display. Use an S-Video cable (not provided) for high quality displays or use the provided RCA to S-Video adapter for standard video devices. This port supports both NTSC and PAL formats.

DVI

Display (DVI-D) Output (on selected models)

The Digital Video Interface port is designed to maximize video graphics output to at panel LCD monitors or other DVI-compliant device.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

18

Knowing the Parts 2

ONOFF

211

1

2

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Audio Speaker System

The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces rich, vibrant sound (results improved with external stereo headphones or speakers). Audio features are software controlled.

Wireless Switch

Enables or disables the built-in wireless LAN and Bluetooth (selected models). When enabled, the wireless status indicator will light. Windows software settings are necessary before use.

19

2 Knowing the Parts

1 2 3

1

2

3

Rear Side

Refer to the diagram below to identify the components on this side of the Notebook PC.

Battery Pack

The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage

and by the specications for this Notebook PC. The battery pack cannot be disassembled

and must be purchased as a single unit.

Power (DC) Input

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook PC and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE

NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a

metal cable and lock that prevent the Notebook PC to be removed from a xed object.

Some security products may also include a motion detector to sound an alarm when moved.

20

Knowing the Parts 2

1

2

3

1

2

3

Power Station (optional)

The optional Power Station allows quick connection and disconnection to all your desktop computer

peripherals. Dock your Notebook PC to expand its capabilities by emulating a powerful desktop computer

when you are in your ofce or at home. Quickly detach your Notebook PC for instant portability.

IMPORTANT: Make sure the power station’s power adapter is connected and has power before docking the Notebook PC. (The Notebook PC’s own power adapter can be attached or removed.)

Docking the Notebook PC

WARNING: When your Notebook PC is attached to the power station, never pickup the Notebook PC alone. Always pickup the entire assembly by the bottom of the power station.

(1) Set the front of the Notebook PC down rst.

(2) Align the triangular marks on the Notebook PC & station�

(3) Set the rear end down and press down as shown�

Ejecting the Notebook PC

While the Notebook PC is turned ON:

(1) Turn OFF or undock the Notebook PC� Make sure

attached peripherals are not in use, press the Dock/ Undock Computer Button on the power station or Undock in Windows� The power station docking indicator will blink

rst and then turn OFF. If Windows notify you of a failure

to undock, you must turn off the Notebook PC before

ejecting from the power station� (2) Press the Power Station Mechanical Eject Button� (3) Lift up the rear of the Notebook PC with both hands�

While the Notebook PC is OFF or undocked:

(1) Press the eject button� (2) Lift up the rear of the Notebook PC�

IMPORTANT: If the Notebook PC enters hibernation while it is attached to the power station, do not eject it. Wake up the Notebook PC and Select “Undock Computer” from Windows “start” before ejecting it from the power station.

Undocking in Windows

Make sure attached peripherals are not in use, then select Undock Computer from Windows start before ejecting the Notebook PC� If Windows notify you of a failure to

undock, you must turn off the Notebook PC before ejecting from the power station.

21

2 Knowing the Parts

3

4

5

1

5

2

1

3

4

2

5

Power Station (optional)

Top Side

Power Station Docking Indicator

The power station docking indicator lights when the Notebook PC is docked (by software) to the

power station. When the Notebook PC is undocked using the Dock/Undock Computer Button or Windows “Undock Computer” command, this indicator will blink rst and then turn OFF.

Dock/Undock Computer Button

While docked (Power Station Docking Indicator is ON): This is an electronic button

to activate “Undock Computer” in Windows start. When undocking, the Power Station Docking Indicator will blink rst and then turn OFF.

While undocked (Power Station Docking Indicator is OFF): This is an electronic button to “dock”

the Notebook PC instead of having to remove and re-attach the Notebook PC to the Power Station.

Power Station Mechanical Eject Button

This is a mechanical (not electronic) button. Press this button rmly downwards to eject the

Notebook PC from the power station. Turn OFF the Notebook PC or make sure attached

devices are not in use and “Undock Computer” is successful in Windows.

Power Station Connector

The power station connector locks the Notebook PC in place and allows the power station to interface with the Notebook PC.

Air Vents

The air vents allow cool air to enter and warm air to exit the Notebook PC.

IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating of the Notebook PC may occur.

22

Knowing the Parts 2

1

2 3 4

1

4

2.0

2

3

Power Station (optional)

Left Side

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi- home

entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to

amplied speakers or headphones. Using this jack automatically disables the built-in speakers.

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

23

2 Knowing the Parts

1

2

3 5

4

6

7

8

2

3

1

4

5

2.0

Power Station (optional)

Rear Side

PS/2 Port

The PS/2 port is for connection to either an external PS/2 mouse or an external PS/2 keyboard.

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

Power (DC) Input (Power Station)

The supplied power adapter converts AC power to DC power for use with

this jack. Power supplied through this jack supplies power to the power station, Notebook PC, and charges the Notebook PC’s battery pack. To prevent damage to the power station, Notebook PC, and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE.

BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

The power station has its own power adapter.

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.

Serial Port

The 9-pin D-sub serial port supports native serial devices such as a serial drawing

tablets, serial mouse, or serial modem. Serial devices have been slowly replaced by USB devices.

24

(continued on next page)

Knowing the Parts 2

6

7

8

Power Station (optional)

Rear Side (Cont.)

Parallel Port

The 25-pin D-sub parallel/printer port supports native parallel devices such as laser/inkjet

printers, or parallel-adapted device such as external hard drives, removable drives, or scanners.

DVI

Display (DVI-D) Output (on selected models)

The Digital Video Interface port is designed to maximize video graphics output to at panel LCD monitors or other DVI-compliant device.

Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor

or projector to allow viewing on a larger external display.

25

2 Knowing the Parts

1

2

1

Power Station (optional)

Right Side

Power Station Eject Button

This is a mechanical (not electronic) button. Press this button rmly downwards to eject the

Notebook PC from the power station. Turn OFF the Notebook PC or make sure attached

devices are not in use and “Undock Computer” is successful in Windows.

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include

a metal cable and lock that prevent the Notebook PC to be removed from a xed

object. Some security products may also include a motion detector to sound an alarm when moved.

26

3. Getting Started

Using AC Power Using Battery Power Powering ON the Notebook PC Checking Battery Power Restarting or Rebooting Powering OFF the Notebook PC Special Keyboard Functions Switches and Status Indicators

27

3 Getting Started

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall

outlet to the DC power required by the Notebook

PC. Your Notebook PC comes with a universal

AC-DC adapter. That means that you may connect

the power cord to any 100V-120V as well as 220V240V outlets without setting switches or using

power converters. Different countries may require

that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

TIP: You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting the AC-DC adapter to the AC outlet rst allows you to test the AC outlet’s power and the AC-DC converter itself for compatibility problems before connecting the DC power to the Notebook PC. The power indi-

cator on the adapter (if available) will light if the power is within accepted ranges.

IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.

28

Getting Started 3

2

1

3

1

2

Using Battery Power

The Notebook PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

To install the battery pack:

IMPORTANT! Only use battery packs and power adapters supplied with this Notebook

PC or specically approved by the manufacturer or retailer for use with this model or

else damage may occur to the Notebook PC.

To remove the battery pack:

Battery Care

The Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and

how your Notebook PC is used. It is ideal that the battery be used in a temperature range between 5˚C and 35˚C (41˚F and 95˚F). You must also take into account that the Notebook PC’s internal temperature

is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.

WARNING! For safety reasons, DO NOT throw the battery in re, DO NOT

short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Notebook PC and contact an authorized service center.

29

3 Getting Started

Powering ON the Notebook PC

The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the

system conguration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen. Press [ESC] and you will

be presented with a boot menu with selections to boot from your available drives.

NOTE: Before bootup, the display panel ashes when the power is turned ON. This is

part of the Notebook PC’s test routine and is not a problem with the display.

IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

The Power-On Self Test (POST)

When you turn ON the Notebook PC, it will rst run through a series of software-controlled diagnostic tests called the Power-On Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’s

hardware conguration, which is used to make a diagnostic check of the system. This record is created

by using the BIOS Setup program. If the POST discovers a difference between the record and the exist-

ing hardware, it will display a message on the screen prompting you to correct the conict by running

BIOS Setup. In most cases the record should be correct when you receive the Notebook PC. When the

test is nished, you may get a message reporting “No operating system found” if the hard disk was not

preloaded with an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new operating system.

Self Monitoring and Reporting Technology

The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POST and gives a warning message if the hard disk drive requires servicing. If any critical hard disk drive warning is given during bootup, backup your data immediately and run Windows disk checking program. To run

Window’s disk checking program: (1) right-click any hard disk drive icon in “My Computer”, (2) choose

Properties, (3) click the Tools tab, (4) click Check Now, (5) select a hard disk drive, (6) select Thorough to also check for physical damages, and (7) click Start. Third party disk utilities such as Symantec’s Norton

Disk Doctor can also perform the same functions but with greater ease and more features.

IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you should take your Notebook PC in for servicing. Continued use may result in data loss.

30

Asus V2Je User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

1. Introducing the Notebook PC

About This User’s Manual

Notes For This Manual

Preparing your Notebook PC

2. Knowing the Parts

Top Side

Bottom Side

Right Side

Left Side

Front Side

Rear Side

Power Station (optional)

Top Side

Left Side

Rear Side

Right Side

3. Getting Started

Power System

Using AC Power

Using Battery Power

Battery Care

Powering ON the Notebook PC

The Power-On Self Test (POST)